https://infinitebody.com Product Feed for Reddit 52901256823093 Claw-set Opal Threaded End in Titanium from People’s Jewelry - 18g/16g / White Opal / 3mm A round, synthetic opal cradled within an implant-grade titanium claw prong setting. Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-opal-threaded-end-in-titanium-from-people-s-jewelry?variant=52901256823093 https://infinitebody.com/cdn/shop/files/ClawsetOpalThreadedEndWhiteOpal3mmPeoplesJewelry.jpg?v=1779218787&width=1024 People's Jewelry new in_stock 20.00 USD 196 52900856234293 Textured Paper Clip Chain in Gold from Hialeah - 14g (1.6mm) / 31mm / 14k Yellow Gold A series of flattened, elongated links form a dynamic solid gold chain. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/textured-paper-clip-chain-in-gold-from-hialeah?variant=52900856234293 https://infinitebody.com/cdn/shop/files/TexturedPaperClipChainYGHialeah.jpg?v=1779208661&width=1024 Hialeah new in_stock 85.00 USD 196 52897021133109 Bezel-set Tiny Charm with Chain in Gold from Modern Mood - 16g (1.2mm) / 14k Yellow Gold / Diamond A 2mm genuine stone embraced by an open-back bezel setting suspended from a lively strand of cable chain. Measures approximately 10mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/bezel-set-tiny-charm-with-chain-in-gold-from-modern-mood?variant=52897021133109 https://infinitebody.com/cdn/shop/files/Bezel-setTinyCharmwithChainYGDiamondModernMood.jpg?v=1779113808&width=1024 Modern Mood new in_stock 98.00 USD 196 52896978272565 Pyramid Disk Press-fit End in Gold from Modern Mood - 14k Yellow Gold / 3mm A high-polished disk enhanced by a riveting surface texture of miniature spikes. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/pyramid-disk-press-fit-end-in-gold-from-modern-mood?variant=52896978272565 https://infinitebody.com/cdn/shop/files/PyramidDiskPFEYGModernMood.jpg?v=1779113601&width=1024 Modern Mood new in_stock 100.00 USD 196 52850125701429 Cry Baby Charm in Gold from Ember Body Jewelry - 16g (1.2mm) / 14k Yellow Gold / Clear CZ A trio of 3mm round-cut gemstones cascade from a scintillating flat cable chain for added movement and shine. Measures approximately 20mm long including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/cry-baby-charm-in-gold-from-ember-body-jewelry?variant=52850125701429 https://infinitebody.com/cdn/shop/files/CryBabyCharmYGCZEmberBodyJewelry.jpg?v=1778264367&width=1024 Ember Body Jewelry new in_stock 164.00 USD 196 52849719476533 Good Times Press-fit End in Gold from Ember Body Jewelry - 14k White Gold / Clear CZ A pair of 1.5mm gemstones rest on either side of a luminous, retro-inspired column. Measures 2mm by 5.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/good-times-press-fit-end-in-gold-from-ember-body-jewelry?variant=52849719476533 https://infinitebody.com/cdn/shop/files/GoodTimesPFEWGCZEmberBodyJewelry.jpg?v=1778263769&width=1024 Ember Body Jewelry new in_stock 134.00 USD 196 52849206526261 Nova Press-fit End in Gold from Ember Body Jewelry - 14k Rose Gold A sandblasted dome cradled within an elegant twisted border. Measures approximately 4mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/nova-press-fit-end-in-gold-from-ember-body-jewelry?variant=52849206526261 https://infinitebody.com/cdn/shop/files/NovaPFERGEmberBodyJewelry.jpg?v=1778263076&width=1024 Ember Body Jewelry new in_stock 144.00 USD 196 52849206853941 Nova Press-fit End in Gold from Ember Body Jewelry - 14k White Gold A sandblasted dome cradled within an elegant twisted border. Measures approximately 4mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/nova-press-fit-end-in-gold-from-ember-body-jewelry?variant=52849206853941 https://infinitebody.com/cdn/shop/files/NovaPFEWGEmberBodyJewelry.jpg?v=1778263076&width=1024 Ember Body Jewelry new in_stock 144.00 USD 196 52849050288437 Solace Press-fit End in Gold from Ember Body Jewelry - 14k Rose Gold A trio of high-polished petals form a dynamic fan that draws the eye. Measures 3.5mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/solace-press-fit-end-in-gold-from-ember-body-jewelry?variant=52849050288437 https://infinitebody.com/cdn/shop/files/SolacePFERGEmberBodyJewelry.jpg?v=1778678293&width=1024 Ember Body Jewelry new in_stock 136.00 USD 196 52849050353973 Solace Press-fit End in Gold from Ember Body Jewelry - 14k White Gold A trio of high-polished petals form a dynamic fan that draws the eye. Measures 3.5mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/solace-press-fit-end-in-gold-from-ember-body-jewelry?variant=52849050353973 https://infinitebody.com/cdn/shop/files/SolacePFEWGEmberBodyJewelry.jpg?v=1778678293&width=1024 Ember Body Jewelry new in_stock 136.00 USD 196 52794699219253 Laser Star Press-fit End in Titanium from Junipurr Jewelry - Default Title Twinkling laser-cut beams adorn a classic, five-point star. Measures approximately 4mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/laser-star-press-fit-end-in-titanium-from-junipurr-jewelry?variant=52794699219253 https://infinitebody.com/cdn/shop/files/LaserStarPFEGroupJunipurr.jpg?v=1777393526&width=1024 Junipurr Jewelry new in_stock 25.00 USD 196 52794688667957 Laser Moon Press-fit End in Titanium from Junipurr Jewelry - Default Title Enchanting laser-cut rays expand outward from the center of a timeless high-polished moon. Measures 3.5mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/laser-moon-press-fit-end-in-titanium-from-junipurr-jewelry?variant=52794688667957 https://infinitebody.com/cdn/shop/files/LaserMoonPFEGroupJunipurr.jpg?v=1777392939&width=1024 Junipurr Jewelry new in_stock 25.00 USD 196 52794667139381 Laser Heart Press-fit End in Titanium from Junipurr Jewelry - Default Title Giving a broken heart a new meaning, laser-cut rays dance across the surface of a heart with softened edges. Measures 3.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/laser-heart-press-fit-end-in-titanium-from-junipurr-jewelry?variant=52794667139381 https://infinitebody.com/cdn/shop/files/LaserHeartPFEGroupJunipurr.jpg?v=1777392769&width=1024 Junipurr Jewelry new in_stock 25.00 USD 196 52794605109557 Laser Blossom Press-fit End in Titanium from Junipurr Jewelry - Default Title A strobe-like texture decorates the surface of a charming floral silhouette. Measures approximately 4.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/laser-blossom-press-fit-end-in-titanium-from-junipurr-jewelry?variant=52794605109557 https://infinitebody.com/cdn/shop/files/LaserBlossomPFEGroupJunipurr.jpg?v=1777391070&width=1024 Junipurr Jewelry new in_stock 25.00 USD 196 52783187657013 Flutter Press-fit End in Gold from Tawapa - 14k White Gold Tiny gold beads sprout forth from a recessed, textured disk in this charming design reminiscent of a dandelion. Measures 2.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/flutter-press-fit-end-in-gold-from-tawapa?variant=52783187657013 https://infinitebody.com/cdn/shop/files/FlutterPFEWGTawapa.jpg?v=1777052777&width=1024 Tawapa new in_stock 126.00 USD 196 52764579135797 Hidden Multitudes Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Black Enamel & Diamond An eye-catching mosaic of polished enamel and textural chains complemented by a 1mm bezel-set genuine stone. Measures 8.5mm by 11.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hidden-multitudes-press-fit-end-in-gold-from-pupil-hall?variant=52764579135797 https://infinitebody.com/cdn/shop/files/HiddenMultitudesPFEYGBlackEnamelDiamondPupilHall.jpg?v=1776970549&width=1024 Pupil Hall new in_stock 456.00 USD 196 52764579234101 Hidden Multitudes Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Teal Enamel & Diamond An eye-catching mosaic of polished enamel and textural chains complemented by a 1mm bezel-set genuine stone. Measures 8.5mm by 11.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hidden-multitudes-press-fit-end-in-gold-from-pupil-hall?variant=52764579234101 https://infinitebody.com/cdn/shop/files/HiddenMultitudesPFEYGTealEnamelDiamondPupilHall.jpg?v=1776970549&width=1024 Pupil Hall new in_stock 456.00 USD 196 52764579266869 Hidden Multitudes Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / White Enamel & Diamond An eye-catching mosaic of polished enamel and textural chains complemented by a 1mm bezel-set genuine stone. Measures 8.5mm by 11.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hidden-multitudes-press-fit-end-in-gold-from-pupil-hall?variant=52764579266869 https://infinitebody.com/cdn/shop/files/HiddenMultitudesPFEYGWhiteEnamelDiamondPupilHall.jpg?v=1776970549&width=1024 Pupil Hall new in_stock 456.00 USD 196 52764431941941 Vertical Hidden Hodgepodge Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Diamond A fun mashup of chains creates an elegant hybrid chain adorned with a 1mm genuine stone as it drapes below a slender gold bar. Measures 7.5mm by 12.5mm.The vertical orientation of this jewelry lends itself to “hidden” piercings in placements such as the vertical outer helix or the conch. The pin placement fits into a vertically oriented piercing, cascading the design below.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/vertical-hidden-hodgepodge-press-fit-end-in-gold-from-pupil-hall?variant=52764431941941 https://infinitebody.com/cdn/shop/files/VerticalHiddenHodgepodgePFEYGDiamondPupilHall.jpg?v=1776708585&width=1024 Pupil Hall new in_stock 270.00 USD 196 52764420014389 Horizontal Hidden Hodgepodge Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Diamond A sleek, solid gold bar holds a draped chain that artfully incorporates mixed chain styles and a 1mm genuine stone. Measures 7.5mm by 12.5mm.The horizontal orientation of this jewelry lends itself to “hidden” piercings in placements such as the outer helix or the conch. The pin placement fits into a horizontally oriented piercing, cascading the design below.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/horizontal-hidden-hodgepodge-press-fit-end-in-gold-from-pupil-hall?variant=52764420014389 https://infinitebody.com/cdn/shop/files/HorizontaHiddenHodgepodgePFEYGDiamondPupilHall.jpg?v=1776708303&width=1024 Pupil Hall new in_stock 270.00 USD 196 52618782048565 Curiouser Slip in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold / Amethyst A grouping of high-polished and textured miniature rings are fixed to one another in a slight curve and divided by a 2mm genuine stone in this dramatic design. Measures approximately 5.5mm by 6mm.This style of jewelry slip is made to be “slipped” onto a ring (or chain) and worn as a decorative accent. Choose a slip in the size that corresponds to the piece on which it will be worn. https://infinitebody.com/products/curiouser-slip-in-gold-from-pupil-hall?variant=52618782048565 https://infinitebody.com/cdn/shop/files/CuriouserSlipYGAmethystPupilHall.jpg?v=1776454931&width=1024 Pupil Hall new in_stock 180.00 USD 196 52618782179637 Curiouser Slip in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold / White Sapphire A grouping of high-polished and textured miniature rings are fixed to one another in a slight curve and divided by a 2mm genuine stone in this dramatic design. Measures approximately 5.5mm by 6mm.This style of jewelry slip is made to be “slipped” onto a ring (or chain) and worn as a decorative accent. Choose a slip in the size that corresponds to the piece on which it will be worn. https://infinitebody.com/products/curiouser-slip-in-gold-from-pupil-hall?variant=52618782179637 https://infinitebody.com/cdn/shop/files/CuriouserSlipYGWhiteSapphirePupilHall.jpg?v=1776454931&width=1024 Pupil Hall new in_stock 180.00 USD 196 52811165040949 Curiouser Slip in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold / Ruby A grouping of high-polished and textured miniature rings are fixed to one another in a slight curve and divided by a 2mm genuine stone in this dramatic design. Measures approximately 5.5mm by 6mm.This style of jewelry slip is made to be “slipped” onto a ring (or chain) and worn as a decorative accent. Choose a slip in the size that corresponds to the piece on which it will be worn. https://infinitebody.com/products/curiouser-slip-in-gold-from-pupil-hall?variant=52811165040949 https://infinitebody.com/cdn/shop/files/CuriouserSlipYGRubyPupilHall.jpg?v=1777653567&width=1024 Pupil Hall new in_stock 180.00 USD 196 52617704833333 Curious Slip in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold / White Sapphire A 2mm prong-set genuine stone nestled between two small hoops offers the illusion of a floating stone displayed in all of its glory. Measures approximately 4.5mm by 4.5mm.This style of jewelry slip is made to be “slipped” onto a ring (or chain) and worn as a decorative accent. Choose a slip in the size that corresponds to the piece on which it will be worn. https://infinitebody.com/products/curious-slip-in-gold-from-pupil-hall?variant=52617704833333 https://infinitebody.com/cdn/shop/files/CuriousSlipWGWhiteSapphirePupilHall.jpg?v=1776454622&width=1024 Pupil Hall new in_stock 150.00 USD 196 52617713484085 Curious Slip in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold / White Sapphire A 2mm prong-set genuine stone nestled between two small hoops offers the illusion of a floating stone displayed in all of its glory. Measures approximately 4.5mm by 4.5mm.This style of jewelry slip is made to be “slipped” onto a ring (or chain) and worn as a decorative accent. Choose a slip in the size that corresponds to the piece on which it will be worn. https://infinitebody.com/products/curious-slip-in-gold-from-pupil-hall?variant=52617713484085 https://infinitebody.com/cdn/shop/files/CuriousSlipYGWhiteSapphirePupilHall.jpg?v=1776454723&width=1024 Pupil Hall new in_stock 150.00 USD 196 52617713516853 Curious Slip in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold / Amethyst A 2mm prong-set genuine stone nestled between two small hoops offers the illusion of a floating stone displayed in all of its glory. Measures approximately 4.5mm by 4.5mm.This style of jewelry slip is made to be “slipped” onto a ring (or chain) and worn as a decorative accent. Choose a slip in the size that corresponds to the piece on which it will be worn. https://infinitebody.com/products/curious-slip-in-gold-from-pupil-hall?variant=52617713516853 https://infinitebody.com/cdn/shop/files/CuriousSlipYGAmethystPupilHall.jpg?v=1776454622&width=1024 Pupil Hall new in_stock 150.00 USD 196 52616305049909 Curio Slip in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold Five miniature hoops in varying styles are fixed to one another in a slight curve, masterfully showcasing texture and dimension with playful beaded details. Measures approximately 4mm by 4.5mmThis style of jewelry slip is made to be “slipped” onto a ring (or chain) and worn as a decorative accent. Choose a slip in the size that corresponds to the piece on which it will be worn. https://infinitebody.com/products/curio-slip-in-gold-from-pupil-hall?variant=52616305049909 https://infinitebody.com/cdn/shop/files/CurioSlipWGPupilHall.jpg?v=1776454430&width=1024 Pupil Hall new in_stock 130.00 USD 196 52616016167221 Mixed Bag 25 Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold A pair of distinct solid gold charms sway from asymmetrical lengths of cable chain in this carefree design. Measures approximately 17mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/mixed-bag-25-charm-in-gold-from-pupil-hall?variant=52616016167221 https://infinitebody.com/cdn/shop/files/MixedBag25CharmWGPupilHall.jpg?v=1776454230&width=1024 Pupil Hall new in_stock 204.00 USD 196 52616025637173 Mixed Bag 25 Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold A pair of distinct solid gold charms sway from asymmetrical lengths of cable chain in this carefree design. Measures approximately 17mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/mixed-bag-25-charm-in-gold-from-pupil-hall?variant=52616025637173 https://infinitebody.com/cdn/shop/files/MixedBag25CharmYGPupilHall.jpg?v=1776454230&width=1024 Pupil Hall new in_stock 204.00 USD 196 52615532380469 Toned Warmer Press-fit End in Gold from Pupil Hall - 14k White Gold / Black Enamel & Diamond A 2mm bezel-set enamel bead paired with a dainty 1.5mm genuine stone dangle radiates a modern sophistication. Measures 2.5mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/toned-warmer-press-fit-end-in-gold-from-pupil-hall?variant=52615532380469 https://infinitebody.com/cdn/shop/files/TonedWarmerPFEWGBlackEnamelDiamondPupilHall.jpg?v=1776453920&width=1024 Pupil Hall new in_stock 204.00 USD 196 52615532282165 Toned Warmer Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Fresh Green Enamel & Diamond A 2mm bezel-set enamel bead paired with a dainty 1.5mm genuine stone dangle radiates a modern sophistication. Measures 2.5mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/toned-warmer-press-fit-end-in-gold-from-pupil-hall?variant=52615532282165 https://infinitebody.com/cdn/shop/files/TonedWarmerPFEYGFreshGreenEnamelDiamondPupilHall.jpg?v=1776453920&width=1024 Pupil Hall new in_stock 204.00 USD 196 52615532347701 Toned Warmer Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / New White Enamel & Diamond A 2mm bezel-set enamel bead paired with a dainty 1.5mm genuine stone dangle radiates a modern sophistication. Measures 2.5mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/toned-warmer-press-fit-end-in-gold-from-pupil-hall?variant=52615532347701 https://infinitebody.com/cdn/shop/files/TonedWarmerPFEYGNewWhiteEnamelDiamondPupilHall.jpg?v=1776453921&width=1024 Pupil Hall new in_stock 204.00 USD 196 52556245860661 Dapped Oval Cable Chain in Gold from Hialeah - 14g (1.6mm) / 14mm / 14k Yellow Gold A twinkling chain with a checkered look that masterfully exhibits dimension and texture.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/dapped-oval-cable-chain-in-gold-from-hialeah?variant=52556245860661 https://infinitebody.com/cdn/shop/files/DappedOvalCableChainYGHialeah_0094e3f7-fee0-4fc2-bbb6-b2fafd447790.jpg?v=1775762579&width=1024 Hialeah new in_stock 60.00 USD 196 52552466596149 Barracuda Chain in Gold from Hialeah - 14g (1.6mm) / 36mm / 14k Yellow Gold Interlocking heart silhouettes and a dainty cable chain come together in this playful, hybrid chain.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/barracuda-chain-in-gold-from-hialeah?variant=52552466596149 https://infinitebody.com/cdn/shop/files/BarraducaChainYGHialeah.jpg?v=1775760313&width=1024 Hialeah new in_stock 182.00 USD 196 52552437006645 Circus Circus Charm in Gold from Hialeah - 16g (1.2mm) / Short / 14k Yellow Gold A solid gold flattened kite dangles from an elongated jump ring for a hint of geometric flair. Short version has 1 kite charm, Medium version has 2 kite charms, and Long version has 3 kite charms.Short measures approximately 13mm including the jump ring.Medium measures approximately 23mm including the jump ring.Long measures approximately 34mm including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/circus-circus-charm-in-gold-from-hialeah?variant=52552437006645 https://infinitebody.com/cdn/shop/files/CircusCircusCharmYGShortHialeah.jpg?v=1775760009&width=1024 Hialeah new in_stock 35.00 USD 196 52552437039413 Circus Circus Charm in Gold from Hialeah - 16g (1.2mm) / Medium / 14k Yellow Gold A solid gold flattened kite dangles from an elongated jump ring for a hint of geometric flair. Short version has 1 kite charm, Medium version has 2 kite charms, and Long version has 3 kite charms.Short measures approximately 13mm including the jump ring.Medium measures approximately 23mm including the jump ring.Long measures approximately 34mm including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/circus-circus-charm-in-gold-from-hialeah?variant=52552437039413 https://infinitebody.com/cdn/shop/files/CircusCircusCharmYGMediumHialeah.jpg?v=1775760009&width=1024 Hialeah new in_stock 65.00 USD 196 52552437301557 Circus Circus Charm in Gold from Hialeah - 16g (1.2mm) / Long / 14k Yellow Gold A solid gold flattened kite dangles from an elongated jump ring for a hint of geometric flair. Short version has 1 kite charm, Medium version has 2 kite charms, and Long version has 3 kite charms.Short measures approximately 13mm including the jump ring.Medium measures approximately 23mm including the jump ring.Long measures approximately 34mm including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/circus-circus-charm-in-gold-from-hialeah?variant=52552437301557 https://infinitebody.com/cdn/shop/files/CircusCircusCharmYGLongHialeah.jpg?v=1775760009&width=1024 Hialeah new in_stock 90.00 USD 196 52528741089589 Twilight Zone Press-fit End in Gold from Ember Body Jewelry - 14k White Gold / Clear CZ A bold arrangement of 2mm by 4mm baguette-cut gemstones form a lively duo. Measures 5mm by 5.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/twilight-zone-press-fit-end-in-gold-from-ember-body-jewelry?variant=52528741089589 https://infinitebody.com/cdn/shop/files/TwilightZoneWGClearCZGroupEmbrBodyJewelry.jpg?v=1775153406&width=1024 Ember Body Jewelry new in_stock 165.00 USD 196 52524102975797 Amulet Press-fit End in Gold from Ember Body Jewelry - 14k Yellow Gold / Purple Pyrope A delectable prong-set genuine stone cabochon rests atop a hexagon platform of solid gold. Measures approximately 4.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/amulet-press-fit-end-in-gold-from-ember-body-jewelry?variant=52524102975797 https://infinitebody.com/cdn/shop/files/AmuletPFEYGPurplePyropeEmberBodyJewelry.jpg?v=1775144064&width=1024 Ember Body Jewelry new in_stock 165.00 USD 196 52523351310645 Cassi Press-fit End in Gold from Ember Body Jewelry - 14k White Gold A sleek gold bar dangles freely from a high-polished 2mm dome exuding effortless elegance. Measures 2mm by 15.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cassi-press-fit-end-in-gold-from-ember-body-jewelry?variant=52523351310645 https://infinitebody.com/cdn/shop/files/CassiPFEWGCZEmberBodyJewelry.jpg?v=1775070116&width=1024 Ember Body Jewelry new in_stock 175.00 USD 196 52523168923957 Sequence Press-fit End in Gold from Ember Body Jewelry - 14k White Gold / Clear CZ Glamorous asymmetry featuring two tapered baguettes and a round-cut stone held in subtle prong settings. Measures 4mm by 4.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sequence-press-fit-end-in-gold-from-ember-body-jewelry?variant=52523168923957 https://infinitebody.com/cdn/shop/files/SequencePFEWGCZEmberBodyJewelry.jpg?v=1775069004&width=1024 Ember Body Jewelry new in_stock 150.00 USD 196 52494636712245 Half Matte Half Polish Disc Press-fit End in Gold from Modern Mood - 14k White Gold / 5mm Silky matte, high-polished. Why choose when you can have both? Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/half-matte-half-polish-disc-press-fit-end-in-gold-from-modern-mood?variant=52494636712245 https://infinitebody.com/cdn/shop/files/HalfMateHalfPolishDiscPFEWGModernMood.jpg?v=1774627373&width=1024 Modern Mood new in_stock 160.00 USD 196 52494636745013 Half Matte Half Polish Disc Press-fit End in Gold from Modern Mood - 14k Yellow Gold / 4mm Silky matte, high-polished. Why choose when you can have both? Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/half-matte-half-polish-disc-press-fit-end-in-gold-from-modern-mood?variant=52494636745013 https://infinitebody.com/cdn/shop/files/HalfMateHalfPolishDiscPFEYGModernMood.jpg?v=1774627373&width=1024 Modern Mood new in_stock 120.00 USD 196 52494636777781 Half Matte Half Polish Disc Press-fit End in Gold from Modern Mood - 14k Yellow Gold / 5mm Silky matte, high-polished. Why choose when you can have both? Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/half-matte-half-polish-disc-press-fit-end-in-gold-from-modern-mood?variant=52494636777781 https://infinitebody.com/cdn/shop/files/HalfMateHalfPolishDiscPFEYGModernMood.jpg?v=1774627373&width=1024 Modern Mood new in_stock 160.00 USD 196 52494265483573 Axl Press-fit End in Gold from Modern Mood - 14k White Gold A mini studded bar holds two asymmetrical chain tassels, each adorned with geometric accents. Measures 4mm by 13.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/axl-press-fit-end-in-gold-from-modern-mood?variant=52494265483573 https://infinitebody.com/cdn/shop/files/AxlPFEWGModernMood.jpg?v=1774626622&width=1024 Modern Mood new in_stock 195.00 USD 196 52474223919413 Heart Press-fit End from Black Forest Jewelry - Black Niobium / Matte / 4mm Love never goes out of style.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/heart-press-fit-end-from-black-forest-jewelry?variant=52474223919413 https://infinitebody.com/cdn/shop/files/HeartPFEBlackNioibiumMatte4mmBlackForestJewelry_4a656f96-b991-46b1-b37b-b6dbbe288237.jpg?v=1774377293&width=1024 Black Forest Jewelry new in_stock 40.00 USD 196 52318880596277 Cassiopea Null Clicker in Gold from Auris Jewellery - 16g (1.2mm) / 9/32" / 14k White Gold A slim, high-polished hoop of solid gold with flat edges and a hinged clasp for easy insertion and removal.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/cassiopea-null-clicker-in-gold-from-auris-jewellery?variant=52318880596277 https://infinitebody.com/cdn/shop/files/CassiopeaNullClickerWGAuris.jpg?v=1770839948&width=1024 Auris Jewellery new in_stock 325.00 USD 196 52318863556917 Crushed Diamond Textured Rhombus Press-fit End in Gold from Auris Jewellery - 14k Yellow Gold / 3mm A solid gold square featuring a finely-textured surface that creates a subtle glow.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/crushed-diamond-textured-rhombus-press-fit-end-in-gold-from-auris-jewellery?variant=52318863556917 https://infinitebody.com/cdn/shop/files/CrushedDiamondTexturedRhombusPFEYGAuris.jpg?v=1770839623&width=1024 Auris Jewellery new in_stock 225.00 USD 196 52318850384181 Your Flight To Press-fit End in Gold from Auris Jewellery - 14k White Gold / Blue CZ, Clear CZ, & Red CZ A miniature airplane in solid gold featuring a central row of three pave-set 0.5mm gemstones. Measures 6mm by 7mm overall.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/your-flight-to-press-fit-end-in-gold-from-auris-jewellery?variant=52318850384181 https://infinitebody.com/cdn/shop/files/YourFlighToPFEWGCZRedCZBlueCZAuris.jpg?v=1770839393&width=1024 Auris Jewellery new in_stock 305.00 USD 196 52318679957813 Cascade Press-fit End in Gold from Auris Jewellery - 14k White Gold / Pink CZ Five 1mm pave-set gemstones set in a geometric and sleek solid gold rectangle. Measures 1.5mm by 7mm overall.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cascade-press-fit-end-in-gold-from-auris-jewellery?variant=52318679957813 https://infinitebody.com/cdn/shop/files/CascadePFEWGPinkCZAuris.jpg?v=1770839020&width=1024 Auris Jewellery new in_stock 305.00 USD 196 52152848974133 Forward-Facing Fun & Games Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 27mm / 14k White Gold with Mixed Enamel A delicate length of cable chain totes four small enamel charms for a touch of nostalgic glamor. Charms are attached with a forward-facing orientation, ideal for chains worn on a single earlobe piercing, or other similar placements.Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/forward-facing-fun-games-lynx-chain-in-gold-from-pupil-hall?variant=52152848974133 https://infinitebody.com/cdn/shop/files/ForwardFacingFunAndGamesChainWGMixedEnamelPupilHall.jpg?v=1767892748&width=1024 Pupil Hall new in_stock 306.00 USD 196 52089993462069 Prong-set Tourmaline Charm from Diablo Organics - 16g (1.2mm) / 18k Yellow Gold & Sterling Silver / Watermelon Tourmaline A bold 9mm genuine stone cradled within a striking double prong-setting and an open-back textured bezel setting emanates an archaic spirit. Measures approximately 12mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/prong-set-tourmaline-charm-from-diablo-organics?variant=52089993462069 https://infinitebody.com/cdn/shop/files/Prong-setTourmalineCharmYGWatermelonTourmalineDiabloOrganics.jpg?v=1766521025&width=1024 Diablo Organics new in_stock 370.00 USD 196 52089955189045 Bezel Oval Charm in Gold from Diablo Organics - 16g (1.2mm) / 18k Yellow Gold / Hessonite Garnet A 3mm by 4.5mm oval-cut genuine stone nestled within a sleek bezel setting attached to a short wisp of cable chain. Measures approximately 13mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/bezel-oval-charm-in-gold-from-diablo-organics?variant=52089955189045 https://infinitebody.com/cdn/shop/files/BezelOvalCharmYGHessoniteGarnetDiabloOrganics.jpg?v=1766520225&width=1024 Diablo Organics new in_stock 210.00 USD 196 52084401307957 Marquise Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / Clear CZ A refined 1.5mm by 3mm prong-set gemstone. Measures 1.5mm by 4mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/marquise-press-fit-end-in-gold-from-junipurr-jewelry?variant=52084401307957 https://infinitebody.com/cdn/shop/files/MarquisePFEYGClearCZJunipurr.jpg?v=1766421690&width=1024 Junipurr Jewelry new in_stock 95.00 USD 196 52084394393909 Mila Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold Vibrant rays dance across the surface of a solid gold triangle embellished with a beaded border. Measures 4mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mila-press-fit-end-in-gold-from-junipurr-jewelry?variant=52084394393909 https://infinitebody.com/cdn/shop/files/MilaPFEYGJunipurr.jpg?v=1766421263&width=1024 Junipurr Jewelry new in_stock 110.00 USD 196 52084371751221 Aman Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / Clear CZ A 2mm and 3mm gemstone sit beside one another in this classy, tapered design. Measures 3mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/aman-press-fit-end-in-gold-from-junipurr-jewelry?variant=52084371751221 https://infinitebody.com/cdn/shop/files/AmanPFEYGClearCZJunipurr.jpg?v=1766419665&width=1024 Junipurr Jewelry new in_stock 130.00 USD 196 52084364738869 Triangle with Gemstones Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / Clear CZ A trio of 1.5mm stones rest at the heart of a radiant, solid gold triangle. Measures 4.5mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/triangle-with-gemstones-press-fit-end-in-gold-from-junipurr-jewelry?variant=52084364738869 https://infinitebody.com/cdn/shop/files/Trianglewith3GemstonesPFEYGClearCZJunipurr.jpg?v=1766419424&width=1024 Junipurr Jewelry new in_stock 120.00 USD 196 52084285538613 Ocie Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / Clear CZ A 2mm by 4mm marquise-cut gemstone and a complimentary marquise-cut stone form a charming, asymmetrical sprout. Measures approximately 4.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ocie-press-fit-end-in-gold-from-junipurr-jewelry?variant=52084285538613 https://infinitebody.com/cdn/shop/files/OciePFEYGCZJunipurr.jpg?v=1766419214&width=1024 Junipurr Jewelry new in_stock 120.00 USD 196 52078790082869 Corvin Press-fit End in Gold from Junipurr Jewelry - 14k White Gold / Black CZ A striking, yet playful four-point star with a 2mm princess-cut gemstone center. Measures approximately 4.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/corvin-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078790082869 https://infinitebody.com/cdn/shop/files/CorvinPFEWGBlackCZJunipurr.jpg?v=1766177891&width=1024 Junipurr Jewelry new in_stock 105.00 USD 196 52078790148405 Corvin Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / Black CZ A striking, yet playful four-point star with a 2mm princess-cut gemstone center. Measures approximately 4.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/corvin-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078790148405 https://infinitebody.com/cdn/shop/files/CorvinPFEYGBlackCZJunipurr.jpg?v=1766177891&width=1024 Junipurr Jewelry new in_stock 105.00 USD 196 52078764163381 Uma Press-fit End in Gold from Junipurr Jewelry - 14k White Gold / Clear CZ A 1.5mm by 2.5mm marquise-cut stone nestled in a delicate prong setting, blooms from solid gold petals. Measures 2.5m by 4mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/uma-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078764163381 https://infinitebody.com/cdn/shop/files/UmaPFEWGClearCZJunipurr.jpg?v=1766177542&width=1024 Junipurr Jewelry new in_stock 85.00 USD 196 52078740734261 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k Rose Gold / 2.5mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078740734261 https://infinitebody.com/cdn/shop/files/HammeredDiskRG2.5mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 75.00 USD 196 52078740832565 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k Rose Gold / 3mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078740832565 https://infinitebody.com/cdn/shop/files/HammeredDiskRG3mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 90.00 USD 196 52078740865333 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k Rose Gold / 4mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078740865333 https://infinitebody.com/cdn/shop/files/HammeredDiskRG4mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 100.00 USD 196 52078740930869 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k White Gold / 2.5mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078740930869 https://infinitebody.com/cdn/shop/files/HammeredDiskWG2.5mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 75.00 USD 196 52078740996405 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k White Gold / 3mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078740996405 https://infinitebody.com/cdn/shop/files/HammeredDiskWG3mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 90.00 USD 196 52078741061941 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k White Gold / 4mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078741061941 https://infinitebody.com/cdn/shop/files/HammeredDiskWG4mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 100.00 USD 196 52078741094709 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / 3mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078741094709 https://infinitebody.com/cdn/shop/files/HammeredDiskYG3mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 90.00 USD 196 52078741160245 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / 4mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078741160245 https://infinitebody.com/cdn/shop/files/HammeredDiskYG4mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 100.00 USD 196 52078741225781 Hammered Disk Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / 2.5mm A series of indentations span the surface of a timeless gold disk for added texture and shine. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078741225781 https://infinitebody.com/cdn/shop/files/HammeredDiskYG2.5mmJunipurr.jpg?v=1766177466&width=1024 Junipurr Jewelry new in_stock 75.00 USD 196 52078698725685 Aydan Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold A slim bar with a subtle curve holds two cable chains that converge at a small, high-polished bar charm for a modern, tapered look. Measures 6mm by 10mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/aydan-press-fit-end-in-gold-from-junipurr-jewelry?variant=52078698725685 https://infinitebody.com/cdn/shop/files/AydanPFEYGJunipurr.jpg?v=1766176973&width=1024 Junipurr Jewelry new in_stock 150.00 USD 196 52801443430709 Bird's Nest Lynx Chain in Gold from Pupil Hall - 16g 39mm / 14k White Gold with White Sapphire / Left A smattering of chains, wrapped around and woven through one another, dripping in tassels, beads and a bold 1.5mm stone charm. The mother of all maximalist chains.Longest chain tassel measures 44mm long including the jump ring.Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/birds-nest-lynx-chain-in-gold-from-pupil-hall?variant=52801443430709 https://infinitebody.com/cdn/shop/files/BirdsNestLynxChainWGWhiteSapphireLeftPupilHall.jpg?v=1776714570&width=1024 Pupil Hall new in_stock 664.00 USD 196 52801443463477 Bird's Nest Lynx Chain in Gold from Pupil Hall - 16g 39mm / 14k Yellow Gold with White Sapphire / Right A smattering of chains, wrapped around and woven through one another, dripping in tassels, beads and a bold 1.5mm stone charm. The mother of all maximalist chains.Longest chain tassel measures 44mm long including the jump ring.Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/birds-nest-lynx-chain-in-gold-from-pupil-hall?variant=52801443463477 https://infinitebody.com/cdn/shop/files/BirdsNestLynxChainYGWhiteSapphireRightOrientationPupilHall.jpg?v=1776714570&width=1024 Pupil Hall new in_stock 664.00 USD 196 52052220477749 Briolette Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold / Green Sapphire A briolette stone charm emphasized by a delicate, draped chain adorns a classic jump ring. Measures approximately 8mm long including jump ring.Briolette stones measure approximately 3mm by 4mm with a variation of up to 1mm in either direction.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/briolette-charm-in-gold-from-pupil-hall?variant=52052220477749 https://infinitebody.com/cdn/shop/files/BrioletteCharmWGGreenSapphirePupilHall.jpg?v=1765486545&width=1024 Pupil Hall new in_stock 186.00 USD 196 52052220510517 Briolette Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold / Orange Sapphire A briolette stone charm emphasized by a delicate, draped chain adorns a classic jump ring. Measures approximately 8mm long including jump ring.Briolette stones measure approximately 3mm by 4mm with a variation of up to 1mm in either direction.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/briolette-charm-in-gold-from-pupil-hall?variant=52052220510517 https://infinitebody.com/cdn/shop/files/BrioletteCharmWGOrangeSapphirePupilHall.jpg?v=1765486545&width=1024 Pupil Hall new in_stock 186.00 USD 196 51988669530421 Sacred Love Press-fit End in Gold from Quetzalli - 14k Yellow Gold / Golden / Medium A raw and refined design consisting of a luminous faceted Herkimer diamond held in a solid-gold prong setting. Due to the one-of-a-kind nature of these stones, please expect variations in their shape, size, and color.Small measures approximately 5mm.Medium measures approximately 7mm.Large measures approximately 10mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sacred-love-press-fit-end-in-gold-from-quetzalli?variant=51988669530421 https://infinitebody.com/cdn/shop/files/SacredLovePFEYGGoldenHerkimerDiamondMDQuetzalli.jpg?v=1764099085&width=1024 Quetzalli new in_stock 220.00 USD 196 51983635579189 Embrace Press-fit End in Gold from Quetzalli - 14k Yellow Gold / Mandarine Garnet / Small A roughly-faceted genuine stone cradled by arms of organically twisting solid gold. Due to the one-of-a-kind nature of these stones, please expect slight variations in their shape, size, and color.Small measures approximately 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/embrace-press-fit-end-in-gold-from-quetzalli?variant=51983635579189 https://infinitebody.com/cdn/shop/files/EmbracePFEYGMandarineGarnetQuetzalli.jpg?v=1764017243&width=1024 Quetzalli new in_stock 260.00 USD 196 51983539732789 Geometric Bezel Charm in Gold from Quetzalli - 16g (1.2mm) / 14k Yellow Gold / Gray Spinel A geometrically faceted genuine stone in a subtle bezel setting dangles freely from a solid gold cable chain.Lavender Spinel measures approximately 29mm long including the jump ring.Gray Spinel measures approximately 23mm long including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/geometric-bezel-charm-in-gold-from-quetzalli?variant=51983539732789 https://infinitebody.com/cdn/shop/files/GeometricBezelCharmYGGraySpinelQuetzalli.jpg?v=1764016660&width=1024 Quetzalli new in_stock 280.00 USD 196 51983539863861 Geometric Bezel Charm in Gold from Quetzalli - 16g (1.2mm) / 14k Yellow Gold / Lavender Spinel A geometrically faceted genuine stone in a subtle bezel setting dangles freely from a solid gold cable chain.Lavender Spinel measures approximately 29mm long including the jump ring.Gray Spinel measures approximately 23mm long including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/geometric-bezel-charm-in-gold-from-quetzalli?variant=51983539863861 https://infinitebody.com/cdn/shop/files/GeometricBezelCharmYGLavenderSpinelQuetzalli.jpg?v=1764016660&width=1024 Quetzalli new in_stock 280.00 USD 196 51495741751605 Hodgepodge Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 33mm / 14k Yellow Gold A delightful medley of box chain, faceted bead chain, and cable chain come together in an eclectic mix.Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/hodgepodge-lynx-chain-in-gold-from-pupil-hall?variant=51495741751605 https://infinitebody.com/cdn/shop/files/HodgepodgeLynxChainYGPupilHall.jpg?v=1762964296&width=1024 Pupil Hall new in_stock 146.00 USD 196 51444241695029 Beaded Hammered Disk Press-fit End in Gold from Seasons Handmade - 14k White Gold / 3mm A coarse crater sits inside a textured border around this solid gold disk.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/beaded-hammered-disk-press-fit-end-in-gold-from-seasons-handmade?variant=51444241695029 https://infinitebody.com/cdn/shop/files/BeadedHammeredDiskPFEWG3mmSeasonsHandmade.jpg?v=1761666511&width=1024 Seasons Handmade new in_stock 90.00 USD 196 51436637389109 Faceted Clicker in Gold from Ember Body Jewelry - 18g (1mm) / 10mm (~13/32") / 14k Yellow Gold A mesmerizing pattern of precise geometric faceting takes this classic design to another level, refracting light at every angle.Sold individually.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/faceted-clicker-in-gold-from-ember-body-jewelry?variant=51436637389109 https://infinitebody.com/cdn/shop/files/FacetedClickerYGEmberBodyJewelry.jpg?v=1761322654&width=1024 Ember Body Jewelry new in_stock 330.00 USD 196 51419212054837 Utopia Charm in Gold from Ember Body Jewelry - 16g (1.2mm) / 14k Yellow Gold / Clear CZ Three dazzling cross charms composed of 1mm gemstones dangle from one another in this striking design. Measures 4mm by 16mm including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/utopia-charm-in-gold-from-ember-body-jewelry?variant=51419212054837 https://infinitebody.com/cdn/shop/files/UtopiaCharmYGCZEmberBodyJewelry.jpg?v=1760717614&width=1024 Ember Body Jewelry new in_stock 165.00 USD 196 51419169030453 Funfetti Press-fit End in Gold from Ember Body Jewelry - 14k Yellow Gold A petite solid gold bar offers a sprinkle of simplicity. Measures 1mm by 3.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/funfetti-press-fit-end-in-gold-from-ember-body-jewelry?variant=51419169030453 https://infinitebody.com/cdn/shop/files/FunfettiPFEYGEmberBodyJewelry.jpg?v=1760715725&width=1024 Ember Body Jewelry new in_stock 95.00 USD 196 51419158282549 Marceline Press-fit End in Gold from Ember Body Jewelry - 14k White Gold / Moissanite / 3.5mm A scintillating genuine stone wrapped in a millgrain border. Size refers to the overall measurement of the end.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/marceline-press-fit-end-in-gold-from-ember-body-jewelry?variant=51419158282549 https://infinitebody.com/cdn/shop/files/MarcelinePFEWGMoissaniteEmberBodyJewelry.jpg?v=1760715248&width=1024 Ember Body Jewelry new in_stock 155.00 USD 196 51383563845941 Harlequin Press-fit End in Gold from Tawapa - 14k Yellow Gold A slender diamond with distinct geometric impressions. Measures 2mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/harlequin-press-fit-end-in-gold-from-tawapa?variant=51383563845941 https://infinitebody.com/cdn/shop/files/HarlequinPFEYGTawapa.jpg?v=1759865802&width=1024 Tawapa new in_stock 140.00 USD 196 51341945536821 Tryangle with Dottie Press-fit End in Gold from Pupil Hall - 14k Yellow Gold A small triangle with a rugged finish holds a small gold bead on one edge. Measures approximately 3mm overall.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/tryangle-with-dottie-press-fit-end-in-gold-from-pupil-hall?variant=51341945536821 https://infinitebody.com/cdn/shop/files/TryanglewithDottiePFEYGPupilHall.jpg?v=1758654327&width=1024 Pupil Hall new in_stock 114.00 USD 196 51341900841269 Instant Press-fit End in Gold from Pupil Hall - 14k White Gold A pair of sleek bar charms sway enticingly from a singular high-polished dome connected by a cluster of jump rings. Measures approximately 3mm by 23mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/instant-press-fit-end-in-gold-from-pupil-hall?variant=51341900841269 https://infinitebody.com/cdn/shop/files/InstantPFEWGPupilHall.jpg?v=1758652596&width=1024 Pupil Hall new in_stock 244.00 USD 196 51341900874037 Instant Press-fit End in Gold from Pupil Hall - 14k Yellow Gold A pair of sleek bar charms sway enticingly from a singular high-polished dome connected by a cluster of jump rings. Measures approximately 3mm by 23mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/instant-press-fit-end-in-gold-from-pupil-hall?variant=51341900874037 https://infinitebody.com/cdn/shop/files/InstantPFEYGPupilHall.jpg?v=1758652596&width=1024 Pupil Hall new in_stock 244.00 USD 196 52764847702325 A Few Things Round Press-fit End in Gold from Pupil Hall - 14k White Gold / Black Enamel Knock knock! A solid gold rectangle charm with an enamel interior sits behind a dainty bead charm to elevate a simple high-polished disc. Measures 3mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/a-few-things-round-press-fit-end-in-gold-from-pupil-hall?variant=52764847702325 https://infinitebody.com/cdn/shop/files/AFewThingsRoundPFEWGBlackEnamelPupilHall.jpg?v=1776712699&width=1024 Pupil Hall new in_stock 228.00 USD 196 52764841378101 A Few Things Round Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Fresh Green Enamel Knock knock! A solid gold rectangle charm with an enamel interior sits behind a dainty bead charm to elevate a simple high-polished disc. Measures 3mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/a-few-things-round-press-fit-end-in-gold-from-pupil-hall?variant=52764841378101 https://infinitebody.com/cdn/shop/files/AFewThingsRoundPFEYGFreshGreenEnamelPupilHall.jpg?v=1776712699&width=1024 Pupil Hall new in_stock 228.00 USD 196 52764846162229 A Few Things Round Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / New White Enamel Knock knock! A solid gold rectangle charm with an enamel interior sits behind a dainty bead charm to elevate a simple high-polished disc. Measures 3mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/a-few-things-round-press-fit-end-in-gold-from-pupil-hall?variant=52764846162229 https://infinitebody.com/cdn/shop/files/AFewThingsRoundPFEYGNewWhiteEnamelPupilHall.jpg?v=1776712699&width=1024 Pupil Hall new in_stock 228.00 USD 196 51341734609205 Even Mixed Bag 25 Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold Two complimentary solid gold charms dangle wistfully from strands of cable chain. Measures approximately 23mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/even-mixed-bag-25-charm-in-gold-from-pupil-hall?variant=51341734609205 https://infinitebody.com/cdn/shop/files/EvenMixedBag25CharmWGPupilHall.jpg?v=1758648189&width=1024 Pupil Hall new in_stock 218.00 USD 196 51341734641973 Even Mixed Bag 25 Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold Two complimentary solid gold charms dangle wistfully from strands of cable chain. Measures approximately 23mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/even-mixed-bag-25-charm-in-gold-from-pupil-hall?variant=51341734641973 https://infinitebody.com/cdn/shop/files/EvenMixedBag25CharmYGPupilHall.jpg?v=1758648189&width=1024 Pupil Hall new in_stock 218.00 USD 196 52764860055861 Short & Sweet Press-fit End in Gold from Pupil Hall - 14k White Gold / Lilac Enamel A single chain dotted with solid gold accents hangs suspended from a 2mm enamel cabochon in a bezel setting. Measures approximately 2mm by 12mmPress-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/short-sweet-press-fit-end-in-gold-from-pupil-hall?variant=52764860055861 https://infinitebody.com/cdn/shop/files/Short_SweetPFEWGLilacEnamelPupilHall.jpg?v=1776713995&width=1024 Pupil Hall new in_stock 220.00 USD 196 52764859990325 Short & Sweet Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Fresh Green Enamel A single chain dotted with solid gold accents hangs suspended from a 2mm enamel cabochon in a bezel setting. Measures approximately 2mm by 12mmPress-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/short-sweet-press-fit-end-in-gold-from-pupil-hall?variant=52764859990325 https://infinitebody.com/cdn/shop/files/Short_SweetPFEYGFreshGreenEnamelPupilHall.jpg?v=1776713995&width=1024 Pupil Hall new in_stock 220.00 USD 196 52764863856949 Short & Sweet Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / New White Enamel A single chain dotted with solid gold accents hangs suspended from a 2mm enamel cabochon in a bezel setting. Measures approximately 2mm by 12mmPress-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/short-sweet-press-fit-end-in-gold-from-pupil-hall?variant=52764863856949 https://infinitebody.com/cdn/shop/files/Short_SweetPFEYGNewWhiteEnamelPupilHall.jpg?v=1776713995&width=1024 Pupil Hall new in_stock 220.00 USD 196 51321103155509 Cradle Press-fit End in Gold from Sacred Symbols - 14k Yellow Gold / Blue Sapphire A 2mm faceted genuine stone in a prong setting sits atop a gentle arc of solid gold. Measures 4mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cradle-press-fit-end-in-gold-from-sacred-symbols?variant=51321103155509 https://infinitebody.com/cdn/shop/files/CradlePFEYGBlueSapphireSacredSymbols.jpg?v=1758130339&width=1024 Sacred Symbols new in_stock 150.00 USD 196 51321103188277 Cradle Press-fit End in Gold from Sacred Symbols - 14k Yellow Gold / Red Sapphire A 2mm faceted genuine stone in a prong setting sits atop a gentle arc of solid gold. Measures 4mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cradle-press-fit-end-in-gold-from-sacred-symbols?variant=51321103188277 https://infinitebody.com/cdn/shop/files/CradlePFEYGRedSapphireSacredSymbols.jpg?v=1758130339&width=1024 Sacred Symbols new in_stock 150.00 USD 196 51317731918133 Hideaway Press-fit End in Gold from Sacred Symbols - 14k Yellow Gold / Green Tourmaline A softly textured shield of solid gold holds a single 2mm prong-set genuine stone, its off-center placement amplifying the organic nature of the design. Measures 5mm by 9mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hideaway-press-fit-end-in-gold-from-sacred-symbols?variant=51317731918133 https://infinitebody.com/cdn/shop/files/HideawayPFEYGGreenTourmalineSacredSymbols.jpg?v=1758052712&width=1024 Sacred Symbols new in_stock 200.00 USD 196 51253891137845 Clicker in Gold from Clickerino - 18g (1mm) / 6mm (~1/4") / 18k Yellow Gold A sleek, timeless hinged ring in solid gold.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/clicker-in-gold-from-clickerino?variant=51253891137845 https://infinitebody.com/cdn/shop/files/ClickerinGoldYGClickerino.jpg?v=1756313554&width=1024 Clickerino new in_stock 120.00 USD 196 51392789807413 Clicker in Gold from Clickerino - 18g (1mm) / 8mm (~5/16") / 18k Yellow Gold A sleek, timeless hinged ring in solid gold.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/clicker-in-gold-from-clickerino?variant=51392789807413 https://infinitebody.com/cdn/shop/files/ClickerinGoldYGClickerino.jpg?v=1756313554&width=1024 Clickerino new in_stock 140.00 USD 196 52005541249333 Clicker in Gold from Clickerino - 18g (1mm) / 9mm (~11/32") / 18k Yellow Gold A sleek, timeless hinged ring in solid gold.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/clicker-in-gold-from-clickerino?variant=52005541249333 https://infinitebody.com/cdn/shop/files/ClickerinGoldYGClickerino.jpg?v=1756313554&width=1024 Clickerino new in_stock 150.00 USD 196 51253892907317 Clicker in Gold from Clickerino - 18g (1mm) / 9.5mm (~3/8") / 18k Yellow Gold A sleek, timeless hinged ring in solid gold.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/clicker-in-gold-from-clickerino?variant=51253892907317 https://infinitebody.com/cdn/shop/files/ClickerinGoldYGClickerino.jpg?v=1756313554&width=1024 Clickerino new in_stock 160.00 USD 196 52889006866741 Clicker in Gold from Clickerino - 16g (1.2mm) / 8mm (~5/16") / 18k Yellow Gold A sleek, timeless hinged ring in solid gold.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/clicker-in-gold-from-clickerino?variant=52889006866741 https://infinitebody.com/cdn/shop/files/ClickerinGoldYGClickerino.jpg?v=1756313554&width=1024 Clickerino new in_stock 170.00 USD 196 52889012830517 Clicker in Gold from Clickerino - 16g (1.2mm) / 9.5mm (~3/8") / 18k Yellow Gold A sleek, timeless hinged ring in solid gold.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/clicker-in-gold-from-clickerino?variant=52889012830517 https://infinitebody.com/cdn/shop/files/ClickerinGoldYGClickerino.jpg?v=1756313554&width=1024 Clickerino new in_stock 190.00 USD 196 51229370712373 Chroma Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Black Onyx A reverse-set princess-cut genuine stone thoughtfully accentuated by a geometric partial bezel setting. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/chroma-press-fit-end-in-gold-from-tether-jewelry?variant=51229370712373 https://infinitebody.com/cdn/shop/files/ChromaPFERGBlackOnyxTether.jpg?v=1755781786&width=1024 Tether Jewelry new in_stock 210.00 USD 196 51229370614069 Chroma Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Montana Sapphire A reverse-set princess-cut genuine stone thoughtfully accentuated by a geometric partial bezel setting. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/chroma-press-fit-end-in-gold-from-tether-jewelry?variant=51229370614069 https://infinitebody.com/cdn/shop/files/ChromaPFERGMontanaSapphireTether.jpg?v=1755781787&width=1024 Tether Jewelry new in_stock 375.00 USD 196 51229375037749 Chroma Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Zawadi Sapphire A reverse-set princess-cut genuine stone thoughtfully accentuated by a geometric partial bezel setting. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/chroma-press-fit-end-in-gold-from-tether-jewelry?variant=51229375037749 https://infinitebody.com/cdn/shop/files/ChromaPFERGZawadiSapphireTether.jpg?v=1755781786&width=1024 Tether Jewelry new in_stock 375.00 USD 196 51229370646837 Chroma Press-fit End in Gold from Tether Jewelry - 14k White Gold / Montana Sapphire A reverse-set princess-cut genuine stone thoughtfully accentuated by a geometric partial bezel setting. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/chroma-press-fit-end-in-gold-from-tether-jewelry?variant=51229370646837 https://infinitebody.com/cdn/shop/files/ChromaPFEWGMontanaSapphireTether.jpg?v=1755781786&width=1024 Tether Jewelry new in_stock 375.00 USD 196 51229370810677 Chroma Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Black Onyx A reverse-set princess-cut genuine stone thoughtfully accentuated by a geometric partial bezel setting. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/chroma-press-fit-end-in-gold-from-tether-jewelry?variant=51229370810677 https://infinitebody.com/cdn/shop/files/ChromaPFEYGBlackOnyxTether.jpg?v=1755781786&width=1024 Tether Jewelry new in_stock 210.00 USD 196 51229375136053 Chroma Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Zawadi Sapphire A reverse-set princess-cut genuine stone thoughtfully accentuated by a geometric partial bezel setting. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/chroma-press-fit-end-in-gold-from-tether-jewelry?variant=51229375136053 https://infinitebody.com/cdn/shop/files/ChromaPFEYGZawadiSapphireTether.jpg?v=1755781996&width=1024 Tether Jewelry new in_stock 375.00 USD 196 51226227245365 Star Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold A subtly raised nautical star with a brushed finish. Measures 4.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/star-press-fit-end-in-gold-from-tether-jewelry?variant=51226227245365 https://infinitebody.com/cdn/shop/files/StarPFEYGTether.jpg?v=1756750145&width=1024 Tether Jewelry new in_stock 100.00 USD 196 51226211123509 Eleni Press-fit End in Gold from Tether Jewelry - 14k Rose Gold Four tightly milgrained rays add a playful touch to this high-polished and petite star. Measures 4mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/eleni-press-fit-end-in-gold-from-tether-jewelry?variant=51226211123509 https://infinitebody.com/cdn/shop/files/EleniPFERGTether.jpg?v=1755633178&width=1024 Tether Jewelry new in_stock 110.00 USD 196 51226197197109 Terra 04 Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold A flat square with a wavelike surface texture. Measures 3mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/terra-04-press-fit-end-in-gold-from-tether-jewelry?variant=51226197197109 https://infinitebody.com/cdn/shop/files/Terra04PFEYGTether.jpg?v=1755633017&width=1024 Tether Jewelry new in_stock 120.00 USD 196 51226192642357 Kappa 04 Press-fit End in Gold from Tether Jewelry - 14k White Gold A tightly detailed band of solid gold encircles a four-pointed star, highlighting its shine against pockets of negative space. Measures 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/kappa-04-press-fit-end-in-gold-from-tether-jewelry?variant=51226192642357 https://infinitebody.com/cdn/shop/files/Kappa04PFEWGTether.jpg?v=1755632834&width=1024 Tether Jewelry new in_stock 185.00 USD 196 51226192740661 Kappa 04 Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold A tightly detailed band of solid gold encircles a four-pointed star, highlighting its shine against pockets of negative space. Measures 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/kappa-04-press-fit-end-in-gold-from-tether-jewelry?variant=51226192740661 https://infinitebody.com/cdn/shop/files/Kappa04PFEYGTether.jpg?v=1755632835&width=1024 Tether Jewelry new in_stock 185.00 USD 196 51226011140405 Andromeda Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Black Diamond A singular 2mm by 3.5mm marquise-cut genuine stone flanked on either end by a petite bead sits atop an elongating setting of tapered solid gold. Measures 2.5mm by 6.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/andromeda-press-fit-end-in-gold-from-tether-jewelry?variant=51226011140405 https://infinitebody.com/cdn/shop/files/AndromedaPFERGBlackDiamondTether.jpg?v=1755629997&width=1024 Tether Jewelry new in_stock 210.00 USD 196 51225994133813 Xanadu Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Black Diamond Three marquise-cut genuine stones fan out like petals from a flower, elongated at either end by a tapered solid gold setting. Measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/xanadu-press-fit-end-in-gold-from-tether-jewelry?variant=51225994133813 https://infinitebody.com/cdn/shop/files/XanaduPFERGBlackDiamondTether.jpg?v=1755629837&width=1024 Tether Jewelry new in_stock 365.00 USD 196 51225994199349 Xanadu Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Black Diamond Three marquise-cut genuine stones fan out like petals from a flower, elongated at either end by a tapered solid gold setting. Measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/xanadu-press-fit-end-in-gold-from-tether-jewelry?variant=51225994199349 https://infinitebody.com/cdn/shop/files/XanaduPFEYGBlackDiamondTether.jpg?v=1755629837&width=1024 Tether Jewelry new in_stock 365.00 USD 196 51225986138421 Lux Pillar Press-fit End in Gold from Tether Jewelry - 14k White Gold / Diamond Nine intersecting 1mm pave-set genuine stones form a twinkling cross. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/lux-pillar-press-fit-end-in-gold-from-tether-jewelry?variant=51225986138421 https://infinitebody.com/cdn/shop/files/LuxPillarPFEWGDiamondTether.jpg?v=1755629303&width=1024 Tether Jewelry new in_stock 230.00 USD 196 51225937248565 Hero Drop Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Black Diamond A 1mm bezel-set genuine stone charm dangles below a triangular shield of solid gold holding a 1.5mm prong-set genuine stone within its beaded border. Measures 4mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hero-drop-press-fit-end-in-gold-from-tether-jewelry?variant=51225937248565 https://infinitebody.com/cdn/shop/files/HeroDropPFERGBlackDiamondTether.jpg?v=1755627826&width=1024 Tether Jewelry new in_stock 195.00 USD 196 51216297034037 Titanium Clicker from Clickerino - 18g (1mm) / 6mm (1/4") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297034037 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 20.00 USD 196 51216297132341 Titanium Clicker from Clickerino - 18g (1mm) / 7mm (9/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297132341 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 20.00 USD 196 51216296870197 Titanium Clicker from Clickerino - 18g (1mm) / 8mm (5/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216296870197 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 20.00 USD 196 51216297165109 Titanium Clicker from Clickerino - 18g (1mm) / 9mm (11/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297165109 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 20.00 USD 196 51216297197877 Titanium Clicker from Clickerino - 18g (1mm) / 10mm (13/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297197877 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 20.00 USD 196 51216296902965 Titanium Clicker from Clickerino - 16g (1.2mm) / 6mm (1/4") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216296902965 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 22.00 USD 196 51216297328949 Titanium Clicker from Clickerino - 16g (1.2mm) / 7mm (9/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297328949 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 22.00 USD 196 51216297230645 Titanium Clicker from Clickerino - 16g (1.2mm) / 8mm (5/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297230645 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 22.00 USD 196 51216297361717 Titanium Clicker from Clickerino - 16g (1.2mm) / 9mm (11/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297361717 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 22.00 USD 196 51216297492789 Titanium Clicker from Clickerino - 16g (1.2mm) / 10mm (13/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297492789 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 22.00 USD 196 51216297460021 Titanium Clicker from Clickerino - 16g (1.2mm) / 11mm (7/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297460021 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 22.00 USD 196 51216297689397 Titanium Clicker from Clickerino - 14g (1.6mm) / 7mm (9/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297689397 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 24.00 USD 196 51216296968501 Titanium Clicker from Clickerino - 14g (1.6mm) / 8mm (5/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216296968501 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 24.00 USD 196 51216297722165 Titanium Clicker from Clickerino - 14g (1.6mm) / 9mm (11/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297722165 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 24.00 USD 196 51216297591093 Titanium Clicker from Clickerino - 14g (1.6mm) / 10mm (13/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297591093 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 24.00 USD 196 51216297623861 Titanium Clicker from Clickerino - 14g (1.6mm) / 11mm (7/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297623861 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 24.00 USD 196 51216297951541 Titanium Clicker from Clickerino - 12g (2mm) / 8mm (5/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297951541 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 26.00 USD 196 51216298017077 Titanium Clicker from Clickerino - 12g (2mm) / 9mm (11/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298017077 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 26.00 USD 196 51216297754933 Titanium Clicker from Clickerino - 12g (2mm) / 10mm (13/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297754933 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 26.00 USD 196 51216297787701 Titanium Clicker from Clickerino - 12g (2mm) / 11mm (7/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297787701 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 26.00 USD 196 51216297853237 Titanium Clicker from Clickerino - 12g (2mm) / 13mm (1/2") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297853237 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 26.00 USD 196 51216297886005 Titanium Clicker from Clickerino - 12g (2mm) / 14mm (9/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297886005 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 26.00 USD 196 51216297918773 Titanium Clicker from Clickerino - 12g (2mm) / 16mm (5/8") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297918773 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 26.00 USD 196 51216298279221 Titanium Clicker from Clickerino - 10g (2.5mm) / 8mm (5/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298279221 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 28.00 USD 196 51216298311989 Titanium Clicker from Clickerino - 10g (2.5mm) / 9mm (11/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298311989 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 28.00 USD 196 51216297001269 Titanium Clicker from Clickerino - 10g (2.5mm) / 10mm (13/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216297001269 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 28.00 USD 196 51216298049845 Titanium Clicker from Clickerino - 10g (2.5mm) / 12mm (15/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298049845 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 28.00 USD 196 51216298082613 Titanium Clicker from Clickerino - 10g (2.5mm) / 14mm (9/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298082613 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 28.00 USD 196 51216298148149 Titanium Clicker from Clickerino - 10g (2.5mm) / 16mm (5/8") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298148149 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 28.00 USD 196 51216298344757 Titanium Clicker from Clickerino - 8g (3mm) / 8mm (5/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298344757 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 30.00 USD 196 51216298377525 Titanium Clicker from Clickerino - 8g (3mm) / 9mm (11/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298377525 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 30.00 USD 196 51216296804661 Titanium Clicker from Clickerino - 8g (3mm) / 12mm (15/32") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216296804661 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 30.00 USD 196 51216298180917 Titanium Clicker from Clickerino - 8g (3mm) / 14mm (9/16") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298180917 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 30.00 USD 196 51216298213685 Titanium Clicker from Clickerino - 8g (3mm) / 16mm (5/8") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298213685 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 30.00 USD 196 51216298246453 Titanium Clicker from Clickerino - 8g (3mm) / 18mm (3/4") A high-polished, single-snap hinged ring made from implant-grade titanium.These products are manufactured in Australia, which utilizes the metric system. The diameter options are listed in millimeters first to provide the most accurate measurement, with approximate conversions to inches listed in parentheses.The hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/titanium-clicker-from-clickerino?variant=51216298246453 https://infinitebody.com/cdn/shop/files/TitaniumClickerClickerino.jpg?v=1755272330&width=1024 Clickerino new in_stock 30.00 USD 196 51209543778613 Poppy Charm in Gold from Regalia - 14g (1.6mm) / 14k Yellow Gold A poppy flower immortalized in solid gold, affixed to its jump ring by a single slender stem.In 14k Yellow Gold, this charm measures approximately 21mm long including the jump ring.In 14k White Gold, this charm measures approximately 23mm long including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/poppy-charm-in-gold-from-regalia?variant=51209543778613 https://infinitebody.com/cdn/shop/files/PoppyCharmYGRegalia.jpg?v=1755106637&width=1024 Regalia new in_stock 295.00 USD 196 51206329008437 Royal Press-fit End in Gold from Modern Mood - 14k White Gold / Diamond A single 1mm prong-set genuine stone nestled in the heart of a petite solid gold kite alongside delicate beading. Measures approximately 2mm by 3mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/royal-press-fit-end-in-gold-from-modern-mood?variant=51206329008437 https://infinitebody.com/cdn/shop/files/RoyalPFEWGDiamondModernMood.jpg?v=1755024503&width=1024 Modern Mood new in_stock 140.00 USD 196 51190247817525 Bezel-set Cabochon Threaded End in Titanium from People's Jewelry - 14g/12g / Sandblasted Amethyst / 4mm A genuine stone nestled in a sleek, low-profile bezel setting. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/bezel-set-cabochon-threaded-end-in-titanium-from-peoples-jewelry?variant=51190247817525 https://infinitebody.com/cdn/shop/files/BezelsetCabochonThreadedEndSandblastedAmethystPeoplesJewelry.jpg?v=1754597275&width=1024 People's Jewelry new in_stock 34.00 USD 196 51190247948597 Bezel-set Cabochon Threaded End in Titanium from People's Jewelry - 14g/12g / Sandblasted Green Onyx / 4mm A genuine stone nestled in a sleek, low-profile bezel setting. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/bezel-set-cabochon-threaded-end-in-titanium-from-peoples-jewelry?variant=51190247948597 https://infinitebody.com/cdn/shop/files/BezelsetCabochonThreadedEndSandblastedGreenOnyxPeoplesJewelry.jpg?v=1754597275&width=1024 People's Jewelry new in_stock 34.00 USD 196 52801955529013 Outward-facing Gem Clicker in Titanium from Diablo Organics - 18g 1/4" / Titanium / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=52801955529013 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 38.00 USD 196 51189776875829 Outward-facing Gem Clicker in Titanium from Diablo Organics - 18g 5/16" / Titanium / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189776875829 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 38.00 USD 196 51189777039669 Outward-facing Gem Clicker in Titanium from Diablo Organics - 18g 5/16" / Yellow Gold / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189777039669 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerYellowPVDTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 45.00 USD 196 51189832548661 Outward-facing Gem Clicker in Titanium from Diablo Organics - 18g 3/8" / Yellow Gold / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189832548661 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerYellowPVDTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 45.00 USD 196 51189777170741 Outward-facing Gem Clicker in Titanium from Diablo Organics - 16g 1/4" / Titanium / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189777170741 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 38.00 USD 196 51189776908597 Outward-facing Gem Clicker in Titanium from Diablo Organics - 16g 5/16" / Titanium / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189776908597 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 38.00 USD 196 51189777072437 Outward-facing Gem Clicker in Titanium from Diablo Organics - 16g 5/16" / Yellow Gold / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189777072437 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerYellowPVDTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 45.00 USD 196 51189776974133 Outward-facing Gem Clicker in Titanium from Diablo Organics - 16g 3/8" / Titanium / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189776974133 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 38.00 USD 196 51189777105205 Outward-facing Gem Clicker in Titanium from Diablo Organics - 16g 3/8" / Yellow Gold / Clear CZ The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/outward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189777105205 https://infinitebody.com/cdn/shop/files/OutwardFacingGemClickerYellowPVDTitaniumCZDiabloOrganics.jpg?v=1754584261&width=1024 Diablo Organics new in_stock 45.00 USD 196 51189775499573 Forward-facing Gem Clicker in Titanium from Diablo Organics - 18g 5/16" / Titanium / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189775499573 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 40.00 USD 196 51189775663413 Forward-facing Gem Clicker in Titanium from Diablo Organics - 18g 5/16" / Yellow Gold / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189775663413 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerYellowPVDTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 45.00 USD 196 51189775630645 Forward-facing Gem Clicker in Titanium from Diablo Organics - 18g 3/8" / Titanium / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189775630645 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 40.00 USD 196 51189775696181 Forward-facing Gem Clicker in Titanium from Diablo Organics - 18g 3/8" / Yellow Gold / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189775696181 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerYellowPVDTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 45.00 USD 196 51189776810293 Forward-facing Gem Clicker in Titanium from Diablo Organics - 16g 1/4" / Titanium / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189776810293 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 40.00 USD 196 51189775532341 Forward-facing Gem Clicker in Titanium from Diablo Organics - 16g 5/16" / Titanium / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189775532341 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 40.00 USD 196 51189775728949 Forward-facing Gem Clicker in Titanium from Diablo Organics - 16g 5/16" / Yellow Gold / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189775728949 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerYellowPVDTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 45.00 USD 196 51189775565109 Forward-facing Gem Clicker in Titanium from Diablo Organics - 16g 3/8 / Titanium / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189775565109 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 40.00 USD 196 51189776777525 Forward-facing Gem Clicker in Titanium from Diablo Organics - 16g 3/8 / Yellow Gold / Clear CZ A glittering row of 1mm prong-set stones cover the face of a high-polished ring. A single-snap hinged closure allows for easy opening and closing, and makes for a comfortable but secure fit.These rings are made from ASTM F-136 implant grade titanium, and are available in two color options: plain high polish titanium or yellow-PVD-coated titanium that mimics the look of gold. https://infinitebody.com/products/forward-facing-gem-clicker-in-titanium-from-diablo-organics?variant=51189776777525 https://infinitebody.com/cdn/shop/files/ForwardFacingGemClickerYellowPVDTitaniumCZDiabloOrganics.jpg?v=1754581576&width=1024 Diablo Organics new in_stock 45.00 USD 196 51121967726901 Queen Press-fit End in Titanium from Diablo Organics - Clear CZ A sequence of 1.5mm by 3mm and 2mm by 4mm tapered baguette-cut stones form a luxurious arch. Measures 5.5mm by 13.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/queen-press-fit-end-in-titanium-from-diablo-organics?variant=51121967726901 https://infinitebody.com/cdn/shop/files/QueenPFETitaniumClearCZDiabloOrganics.jpg?v=1752696668&width=1024 Diablo Organics new in_stock 60.00 USD 196 51121960091957 Bling Press-fit End in Titanium from Diablo Organics - Clear CZ A trio of baguette-cut stones create a bold yet elegant cluster. Center stone measures 2mm by 5mm and outer stones measure 1.5mm by 4mm. Measures approximately 6mm by 6.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/bling-press-fit-end-in-titanium-from-diablo-organics?variant=51121960091957 https://infinitebody.com/cdn/shop/files/BlingPFETitaniumClearCZDiabloOrganics.jpg?v=1752696547&width=1024 Diablo Organics new in_stock 40.00 USD 196 51121957077301 Three Stone Whip Press-fit End in Titanium from Diablo Organics - Clear CZ Descending sizes of prong-set gemstones enhanced by a duo of cable link chain charms for added fluidity. Measures 3mm by 18mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/three-stone-whip-press-fit-end-in-titanium-from-diablo-organics?variant=51121957077301 https://infinitebody.com/cdn/shop/files/ThreeStoneWhipPFETitaniumClearCZDiabloOrganics.jpg?v=1752696404&width=1024 Diablo Organics new in_stock 60.00 USD 196 51075088122165 Triple Gemstone Marquise Press-fit End in Titanium from Diablo Organics - Clear CZ / 4mm Three prong-set gemstones fan outward in this glamorous, floral-inspired design.With 3mm stones, measures approximately 4mm by 5.5mm.With 4mm stones, measures approximately 5mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/triple-gemstone-marquise-press-fit-end-in-titanium-from-diablo-organics?variant=51075088122165 https://infinitebody.com/cdn/shop/files/TripleGemstoneMarquisePFETICZDiabloOrganic.jpg?v=1764864962&width=1024 Diablo Organics new in_stock 30.00 USD 196 51035624145205 Stabby Punk Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 5/16" A row of short and punchy 3mm small cone spikes line the edge of a high-polished ASTM F-136 implant grade titanium ring.The 5/16” diameter holds seven cone spikes. The 3/8” diameter holds eight cone spikes.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/stabby-punk-clicker-in-titanium-from-diablo-organics?variant=51035624145205 https://infinitebody.com/cdn/shop/files/StabbyPunkClickerTIDiabloOrganics.jpg?v=1751313299&width=1024 Diablo Organics new in_stock 40.00 USD 196 51035624177973 Stabby Punk Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 3/8" A row of short and punchy 3mm small cone spikes line the edge of a high-polished ASTM F-136 implant grade titanium ring.The 5/16” diameter holds seven cone spikes. The 3/8” diameter holds eight cone spikes.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/stabby-punk-clicker-in-titanium-from-diablo-organics?variant=51035624177973 https://infinitebody.com/cdn/shop/files/StabbyPunkClickerTIDiabloOrganics.jpg?v=1751313299&width=1024 Diablo Organics new in_stock 40.00 USD 196 51035368653109 Sun Ray Gem Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 5/16" / Clear CZ Dynamic rays burst forth from a glamorous row of 1mm gemstones lining the edge of a simple ring made of ASTM F-136 implant grade titanium. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/sun-ray-gem-clicker-in-titanium-from-diablo-organics?variant=51035368653109 https://infinitebody.com/cdn/shop/files/SunRayGemClickerTICZDiabloOrganic.jpg?v=1751312716&width=1024 Diablo Organics new in_stock 60.00 USD 196 51035368685877 Sun Ray Gem Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 3/8" / Clear CZ Dynamic rays burst forth from a glamorous row of 1mm gemstones lining the edge of a simple ring made of ASTM F-136 implant grade titanium. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/sun-ray-gem-clicker-in-titanium-from-diablo-organics?variant=51035368685877 https://infinitebody.com/cdn/shop/files/SunRayGemClickerTICZDiabloOrganic.jpg?v=1751312716&width=1024 Diablo Organics new in_stock 60.00 USD 196 51035251867957 Baguette Cascade Press-fit End in Titanium from Diablo Organics - Clear CZ / Left Four gemstones in graduating sizes form an elegant wave. Measures 4.5mm by 8mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/baguette-cascade-press-fit-end-in-titanium-from-diablo-organics?variant=51035251867957 https://infinitebody.com/cdn/shop/files/BaguetteCascadePFETICZLeftDiabloOrganics.jpg?v=1751310974&width=1024 Diablo Organics new in_stock 45.00 USD 196 51035252293941 Baguette Cascade Press-fit End in Titanium from Diablo Organics - Clear CZ / Right Four gemstones in graduating sizes form an elegant wave. Measures 4.5mm by 8mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/baguette-cascade-press-fit-end-in-titanium-from-diablo-organics?variant=51035252293941 https://infinitebody.com/cdn/shop/files/BaguetteCascadePFETICZRightDiabloOrganics.jpg?v=1751310974&width=1024 Diablo Organics new in_stock 45.00 USD 196 50872350867765 Giza Press-fit End in Gold from Tawapa - 14k Yellow Gold / Small Inspired by its historical counterparts, a sleek pyramid commands attention with its enigmatic presence. Small measures approximately 6.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/giza-press-fit-end-in-gold-from-tawapa?variant=50872350867765 https://infinitebody.com/cdn/shop/files/GizaPFEYGTawapa.jpg?v=1745870277&width=1024 Tawapa new in_stock 190.00 USD 196 50872319705397 Nile Bridge Press-fit End in Gold from Tawapa - 14k Yellow Gold A solid gold bipyramid with a mysterious air. Measures 4.5mm by 6mm and measures 4.5mm tall.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/nile-bridge-press-fit-end-in-gold-from-tawapa?variant=50872319705397 https://infinitebody.com/cdn/shop/files/NileBridgePFEYGTawapa.jpg?v=1745870107&width=1024 Tawapa new in_stock 230.00 USD 196 50786750955829 Cascade 3 Charm in Gold from Tether Jewelry - 14g (1.6mm) / 14k Rose Gold Three graduating lengths of cable chain create subtle movement when paired with a ring or post. Measures approximately 27mm, including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/cascade-3-charm-in-gold-from-tether-jewelry?variant=50786750955829 https://infinitebody.com/cdn/shop/files/Cascade03CharmRGTether.jpg?v=1744134702&width=1024 Tether Jewelry new in_stock 140.00 USD 196 50786707374389 Hex Stud Orbit Charm in Gold from Tether Jewelry - 14g (1.6mm) / 14k Rose Gold A sturdy length of cable chain is bisected by a 4mm three-dimensional hexagon showcasing the beauty in the unexpected. Measures approximately 22mm including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/hex-stud-orbit-charm-in-gold-from-tether-jewelry?variant=50786707374389 https://infinitebody.com/cdn/shop/files/HexStudOrbitCharmRGTether.jpg?v=1744133879&width=1024 Tether Jewelry new in_stock 190.00 USD 196 50786707439925 Hex Stud Orbit Charm in Gold from Tether Jewelry - 14g (1.6mm) / 14k Yellow Gold A sturdy length of cable chain is bisected by a 4mm three-dimensional hexagon showcasing the beauty in the unexpected. Measures approximately 22mm including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/hex-stud-orbit-charm-in-gold-from-tether-jewelry?variant=50786707439925 https://infinitebody.com/cdn/shop/files/HexStudOrbitCharmYGTether.jpg?v=1744133879&width=1024 Tether Jewelry new in_stock 190.00 USD 196 50786658058549 Gemmed Orbit Charm in Gold from Tether Jewelry - 14g (1.6mm) / 14k Rose Gold / Diamond A delicate wisp of cable chain is embellished with two 1mm genuine stones in open-back bezel settings. Measures approximately 21mm including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/gemmed-orbit-charm-in-gold-from-tether-jewelry?variant=50786658058549 https://infinitebody.com/cdn/shop/files/GemmedOrbitCharmRGDIATether.jpg?v=1744129693&width=1024 Tether Jewelry new in_stock 180.00 USD 196 50786480783669 Chained Zeta 06 Press-fit End in Gold from Tether Jewelry - 14k Rose Gold Three lengths of curb chain are suspended from a 4mm rounded triangle with stepped edges embodying geometric glamor. Measures 4mm by 11mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/chained-zeta-06-press-fit-end-in-gold-from-tether-jewelry?variant=50786480783669 https://infinitebody.com/cdn/shop/files/ChainedZeta06PFERGTether.jpg?v=1744128938&width=1024 Tether Jewelry new in_stock 160.00 USD 196 50786351251765 Hydro Gem Press-fit End in Gold from Tether Jewelry - 14k White Gold / Blue Sapphire A luminous, faceted pear holds 1mm and 1.5mm prong-set genuine stones in this modern design. Measures 3mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hydro-gem-press-fit-end-in-gold-from-tether-jewelry?variant=50786351251765 https://infinitebody.com/cdn/shop/files/HydroGemPFEWGBLUSAPTether.jpg?v=1744128604&width=1024 Tether Jewelry new in_stock 180.00 USD 196 50786351284533 Hydro Gem Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Black Diamond A luminous, faceted pear holds 1mm and 1.5mm prong-set genuine stones in this modern design. Measures 3mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hydro-gem-press-fit-end-in-gold-from-tether-jewelry?variant=50786351284533 https://infinitebody.com/cdn/shop/files/HydroGemPFEYGBLKDIATether.jpg?v=1744128604&width=1024 Tether Jewelry new in_stock 165.00 USD 196 50786183315765 Ursa Minor Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Emerald A constellation-inspired design of three pave-set 1.5mm genuine stones nestled within a solid gold triangle. Measures 3.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ursa-minor-press-fit-end-in-gold-from-tether-jewelry?variant=50786183315765 https://infinitebody.com/cdn/shop/files/UrsaMinorPFEYGEMTether.jpg?v=1744055623&width=1024 Tether Jewelry new in_stock 200.00 USD 196 50785385546037 Ursa Major Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Pink Tourmaline Six 1.5mm pave-set genuine stones cover the face of a formidable, high-polished triangle. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ursa-major-press-fit-end-in-gold-from-tether-jewelry?variant=50785385546037 https://infinitebody.com/cdn/shop/files/UrsaMajorPFERGPITOURTether.jpg?v=1744055143&width=1024 Tether Jewelry new in_stock 240.00 USD 196 50785385611573 Ursa Major Press-fit End in Gold from Tether Jewelry - 14k White Gold / London Blue Topaz Six 1.5mm pave-set genuine stones cover the face of a formidable, high-polished triangle. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ursa-major-press-fit-end-in-gold-from-tether-jewelry?variant=50785385611573 https://infinitebody.com/cdn/shop/files/UrsaMajorPFEWGLBTTether.jpg?v=1744055143&width=1024 Tether Jewelry new in_stock 230.00 USD 196 50785385447733 Ursa Major Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Emerald Six 1.5mm pave-set genuine stones cover the face of a formidable, high-polished triangle. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ursa-major-press-fit-end-in-gold-from-tether-jewelry?variant=50785385447733 https://infinitebody.com/cdn/shop/files/UrsaMajorPFEGroupTether.jpg?v=1744055143&width=1024 Tether Jewelry new in_stock 305.00 USD 196 50782267867445 Argo Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Diamond Four 1.5mm genuine stones are cradled by pyramid-shaped prong settings within an opulent square. Measures 3.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/argo-press-fit-end-in-gold-from-tether-jewelry?variant=50782267867445 https://infinitebody.com/cdn/shop/files/ArgoPFEYGDIATether.jpg?v=1744054894&width=1024 Tether Jewelry new in_stock 395.00 USD 196 50782267932981 Argo Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Emerald Four 1.5mm genuine stones are cradled by pyramid-shaped prong settings within an opulent square. Measures 3.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/argo-press-fit-end-in-gold-from-tether-jewelry?variant=50782267932981 https://infinitebody.com/cdn/shop/files/ArgoPFEGroupTether.jpg?v=1744054895&width=1024 Tether Jewelry new in_stock 255.00 USD 196 50782241980725 Melange Princess Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Diamond A 2mm princess-cut genuine stone sits within a raised beaded square giving it a regal demeanor. Measures approximately 4mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/melange-princess-press-fit-end-in-gold-from-tether-jewelry?variant=50782241980725 https://infinitebody.com/cdn/shop/files/MelangePrincessPFEYGDIATether.jpg?v=1756750012&width=1024 Tether Jewelry new in_stock 315.00 USD 196 50747768308021 Pippa Dot Press-fit End in Gold from Modern Mood - 14k White Gold / Moonstone Equal parts sweet and sophisticated, a 2mm claw-set genuine stone is accented with a 1mm solid gold bead. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/pippa-dot-press-fit-end-in-gold-from-modern-mood?variant=50747768308021 https://infinitebody.com/cdn/shop/files/PippaDotPFEWGMoonstoneModernMood.jpg?v=1742843361&width=1024 Modern Mood new in_stock 145.00 USD 196 52897030406453 Ayla Press-fit End in Gold from Modern Mood - 14k White Gold / Diamond A sleek crescent moon holds 0.25mm, 0.5mm, and 1mm genuine stones. Measures 3.5mm by 4mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ayla-press-fit-end-in-gold-from-modern-mood?variant=52897030406453 https://infinitebody.com/cdn/shop/files/AylaPFEWGDiamondModernMood.jpg?v=1779114019&width=1024 Modern Mood new in_stock 216.00 USD 196 52495060795701 Hera Chain in Gold from Modern Mood - 16g (1.2mm) / 22mm / 14k White Gold Cable chains of varying lengths forming a waterfall of texture and movement. Graduating chain detail measures approximately 12mm at its longest point.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/hera-chain-in-gold-from-modern-mood?variant=52495060795701 https://infinitebody.com/cdn/shop/files/HeraChainWGModernMood.jpg?v=1774635207&width=1024 Modern Mood new in_stock 110.00 USD 196 50736116760885 Live To Tell Press-fit End in Gold from BVLA - 14k Rose Gold / Swiss Blue Topaz A 2mm genuine stone bordered on one side by staggered gold rays. Measures 6.5mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/live-to-tell-press-fit-end-in-gold-from-bvla?variant=50736116760885 https://infinitebody.com/cdn/shop/files/LiveToTellRGSwissBlueTopazCabochonBVLA.jpg?v=1742413394&width=1024 BVLA new in_stock 350.00 USD 196 50736116793653 Live To Tell Press-fit End in Gold from BVLA - 14k White Gold / Chrysoprase A 2mm genuine stone bordered on one side by staggered gold rays. Measures 6.5mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/live-to-tell-press-fit-end-in-gold-from-bvla?variant=50736116793653 https://infinitebody.com/cdn/shop/files/LiveToTellWGChrysopraseCabochonBVLA.jpg?v=1742413394&width=1024 BVLA new in_stock 350.00 USD 196 50736117252405 Live To Tell Press-fit End in Gold from BVLA - 14k White Gold / Tanzanite A 2mm genuine stone bordered on one side by staggered gold rays. Measures 6.5mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/live-to-tell-press-fit-end-in-gold-from-bvla?variant=50736117252405 https://infinitebody.com/cdn/shop/files/LiveToTellPFEWGTanzaniteBVLA.jpg?v=1742413394&width=1024 BVLA new in_stock 350.00 USD 196 50736117154101 Live To Tell Press-fit End in Gold from BVLA - 14k Yellow Gold / Oregon Sunstone A 2mm genuine stone bordered on one side by staggered gold rays. Measures 6.5mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/live-to-tell-press-fit-end-in-gold-from-bvla?variant=50736117154101 https://infinitebody.com/cdn/shop/files/LiveToTellYGOregonSunstoneBVLA.jpg?v=1742413386&width=1024 BVLA new in_stock 350.00 USD 196 50680477450549 Bitty Needle Press-fit End in Gold from Pupil Hall - 14k Rose Gold A high-polished, fragmented sword with a dangling blade charm. The miniature, revised version of the signature press-fit end from Pupil Hall. Measures approximately 3.5mm by 13.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/bitty-needle-press-fit-end-in-gold-from-pupil-hall?variant=50680477450549 https://infinitebody.com/cdn/shop/files/BittyNeedlePFERGPupilHall.jpg?v=1741114936&width=1024 Pupil Hall new in_stock 226.00 USD 196 50680477516085 Bitty Needle Press-fit End in Gold from Pupil Hall - 14k White Gold A high-polished, fragmented sword with a dangling blade charm. The miniature, revised version of the signature press-fit end from Pupil Hall. Measures approximately 3.5mm by 13.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/bitty-needle-press-fit-end-in-gold-from-pupil-hall?variant=50680477516085 https://infinitebody.com/cdn/shop/files/BittyNeedlePFEWGPupilHall.jpg?v=1741114936&width=1024 Pupil Hall new in_stock 226.00 USD 196 50680477614389 Bitty Needle Press-fit End in Gold from Pupil Hall - 14k Yellow Gold A high-polished, fragmented sword with a dangling blade charm. The miniature, revised version of the signature press-fit end from Pupil Hall. Measures approximately 3.5mm by 13.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/bitty-needle-press-fit-end-in-gold-from-pupil-hall?variant=50680477614389 https://infinitebody.com/cdn/shop/files/BittyNeedlePFEYGPupilHall.jpg?v=1741114936&width=1024 Pupil Hall new in_stock 226.00 USD 196 50680452907317 Mega Bada Bitty Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Ruby A 2mm prong-set genuine stone elevates a short length of hefty box chain. Measures approximately 2mm by 7.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-bada-bitty-press-fit-end-in-gold-from-pupil-hall?variant=50680452907317 https://infinitebody.com/cdn/shop/files/MegaBadaBittyPFEYGRubyPupilHall.jpg?v=1741114713&width=1024 Pupil Hall new in_stock 240.00 USD 196 50680452940085 Mega Bada Bitty Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / White Sapphire A 2mm prong-set genuine stone elevates a short length of hefty box chain. Measures approximately 2mm by 7.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-bada-bitty-press-fit-end-in-gold-from-pupil-hall?variant=50680452940085 https://infinitebody.com/cdn/shop/files/MegaBadaBittyPFEYGWhiteSapphirePupilHall.jpg?v=1741114713&width=1024 Pupil Hall new in_stock 240.00 USD 196 50680306827573 Mega Bada Bing Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / London Blue Topaz A sturdy box chain enhanced by a 2mm genuine stone is paired with a string of three luminous 2.5mm beads for added contrast. Measures approximately 5mm by 12mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-bada-bing-press-fit-end-in-gold-from-pupil-hall?variant=50680306827573 https://infinitebody.com/cdn/shop/files/MegaBadaBingPFEGroupPupilHall.jpg?v=1741114462&width=1024 Pupil Hall new in_stock 320.00 USD 196 50680307089717 Mega Bada Bing Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Ruby A sturdy box chain enhanced by a 2mm genuine stone is paired with a string of three luminous 2.5mm beads for added contrast. Measures approximately 5mm by 12mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-bada-bing-press-fit-end-in-gold-from-pupil-hall?variant=50680307089717 https://infinitebody.com/cdn/shop/files/MegaBadaBingPFEYGRubyPupilHall.jpg?v=1741114462&width=1024 Pupil Hall new in_stock 320.00 USD 196 50680278614325 Mega Bada Boop Press-fit End in Gold from Pupil Hall - 14k White Gold A strand of five 2.5mm beads is paired with a box chain and cable chain hybrid in this asymmetrical statement piece. Measures approximately 5mm by 15mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-bada-boop-press-fit-end-in-gold-from-pupil-hall?variant=50680278614325 https://infinitebody.com/cdn/shop/files/MegaBadaBoopPFEGroupPupilHall.jpg?v=1741114047&width=1024 Pupil Hall new in_stock 294.00 USD 196 50680278679861 Mega Bada Boop Press-fit End in Gold from Pupil Hall - 14k Yellow Gold A strand of five 2.5mm beads is paired with a box chain and cable chain hybrid in this asymmetrical statement piece. Measures approximately 5mm by 15mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-bada-boop-press-fit-end-in-gold-from-pupil-hall?variant=50680278679861 https://infinitebody.com/cdn/shop/files/MegaBadaBoopPFEGroupPupilHall.jpg?v=1741114047&width=1024 Pupil Hall new in_stock 294.00 USD 196 50680249942325 Mega 4 Press-fit End in Gold from Pupil Hall - 14k Rose Gold A chain of four 2.5mm high polish beads exudes an effortless magnetism. Measures 2.5mm by 12mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-4-press-fit-end-in-gold-from-pupil-hall?variant=50680249942325 https://infinitebody.com/cdn/shop/files/Mega4PFERGPupilHall.jpg?v=1741113859&width=1024 Pupil Hall new in_stock 196.00 USD 196 50680250007861 Mega 4 Press-fit End in Gold from Pupil Hall - 14k Yellow Gold A chain of four 2.5mm high polish beads exudes an effortless magnetism. Measures 2.5mm by 12mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-4-press-fit-end-in-gold-from-pupil-hall?variant=50680250007861 https://infinitebody.com/cdn/shop/files/Mega4PFEYGPupilHall.jpg?v=1741113859&width=1024 Pupil Hall new in_stock 196.00 USD 196 50678804775221 Mega 6 Press-fit End in Gold from Pupil Hall - 14k Yellow Gold A sturdy strand of six 2.5mm solid gold beads gives off a confident air. Measures 2.5mm by 18mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-6-press-fit-end-in-gold-from-pupil-hall?variant=50678804775221 https://infinitebody.com/cdn/shop/files/Mega6PFEYGPupilHall.jpg?v=1741107558&width=1024 Pupil Hall new in_stock 242.00 USD 196 50678754246965 All Mixed Up Tri Me Press-fit End in Gold from Pupil Hall - 14k Rose Gold / Amethyst & Lilac Enamel A 2mm reverse-set genuine stone, round-cut genuine stone, and enamel accent come together in a cluster of elegant contrast. Measures approximately 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/all-mixed-up-tri-me-press-fit-end-in-gold-from-pupil-hall?variant=50678754246965 https://infinitebody.com/cdn/shop/files/AllMixedUpPFERGLilacEnamelAmethystPupilHall.jpg?v=1741107328&width=1024 Pupil Hall new in_stock 220.00 USD 196 50678394061109 Triple Stick Around Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold Three slender bar charms are suspended from a mix of different gold chains, creating a small, tapered curtain of solid gold. Measures 20mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/triple-stick-around-charm-in-gold-from-pupil-hall?variant=50678394061109 https://infinitebody.com/cdn/shop/files/TripleStickAroundCharmWGPupilHall.jpg?v=1741106044&width=1024 Pupil Hall new in_stock 214.00 USD 196 50675595772213 Just A Peek Mega Press-fit Ring in Gold from Pupil Hall - 18g (1mm) / 5/16" / 14k Yellow Gold An eye-catching, oversized bead chain affixed to a solid gold press-fit post embodies luxe minimalism.This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post. Size refers to the thickness of the post. https://infinitebody.com/products/just-a-peek-mega-press-fit-ring-in-gold-from-pupil-hall?variant=50675595772213 https://infinitebody.com/cdn/shop/files/JustAPeekMegaRingYGPupilHall.jpg?v=1741104449&width=1024 Pupil Hall new in_stock 378.00 USD 196 50675503235381 Beaded Two Faced Long Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k Rose Gold / Green Zircon & Pink Sapphire Two 3mm genuine stones create a fluid charm that dangles below a trio of 2.5mm beads. Measures approximately 20mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/beaded-two-faced-long-charm-in-gold-from-pupil-hall?variant=50675503235381 https://infinitebody.com/cdn/shop/files/BeadedTwoFacedLongCharmRGGreenZirconPinkSapphirePupilHall.jpg?v=1741367078&width=1024 Pupil Hall new in_stock 272.00 USD 196 50675503300917 Beaded Two Faced Long Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold / Rhodolite & Amethyst Two 3mm genuine stones create a fluid charm that dangles below a trio of 2.5mm beads. Measures approximately 20mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/beaded-two-faced-long-charm-in-gold-from-pupil-hall?variant=50675503300917 https://infinitebody.com/cdn/shop/files/BeadedTwoFacedLongCharmWGRhodoliteAmethystPupilHall.jpg?v=1741103872&width=1024 Pupil Hall new in_stock 272.00 USD 196 50675503268149 Beaded Two Faced Long Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold / Green Zircon & Pink Sapphire Two 3mm genuine stones create a fluid charm that dangles below a trio of 2.5mm beads. Measures approximately 20mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/beaded-two-faced-long-charm-in-gold-from-pupil-hall?variant=50675503268149 https://infinitebody.com/cdn/shop/files/BeadedTwoFacedLongCharmYGPupilHall.jpg?v=1741103872&width=1024 Pupil Hall new in_stock 272.00 USD 196 50650469237045 Duplex Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 26mm / 14k Yellow Gold with Black Diamond & Black Enamel A cluster of four 1.5mm enamel beads and four 1mm genuine stones are connected by an eye-catching mix of cable chain, faceted bead chain, and box chain.Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Posts not included. https://infinitebody.com/products/duplex-lynx-chain-in-gold-from-pupil-hall?variant=50650469237045 https://infinitebody.com/cdn/shop/files/DuplexLynxChainYGBlackEnamelBlackDiamondPupilHall.jpg?v=1741206413&width=1024 Pupil Hall new in_stock 348.00 USD 196 50650469269813 Duplex Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 26mm / 14k Yellow Gold with Blue Diamond & Moody Teal Enamel A cluster of four 1.5mm enamel beads and four 1mm genuine stones are connected by an eye-catching mix of cable chain, faceted bead chain, and box chain.Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Posts not included. https://infinitebody.com/products/duplex-lynx-chain-in-gold-from-pupil-hall?variant=50650469269813 https://infinitebody.com/cdn/shop/files/DuplexLynxChainYGMoodyTealEnamelBlueDiamondPupilHall.jpg?v=1741206413&width=1024 Pupil Hall new in_stock 348.00 USD 196 50645981593909 Duplex Double Press-fit End in Gold from Pupil Hall - 14k White Gold / Black Diamond & Black Enamel A 2mm genuine stone cluster and a 3.5mm enamel cluster are connected by a cable chain in this versatile design. Chain measures 9mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. Multi-point press-fit ends are composed of two connected decorative ends. Therefore, you will need to purchase two press-fit posts for multi-point press-fit ends to ensure that both decorative ends have a corresponding post. https://infinitebody.com/products/duplex-double-press-fit-end-in-gold-from-pupil-hall?variant=50645981593909 https://infinitebody.com/cdn/shop/files/DuplexDoublePFEWGBlackEnamelBlackDiamondPupilHall.jpg?v=1740601812&width=1024 Pupil Hall new in_stock 264.00 USD 196 50645981954357 Duplex Double Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Blue Diamond & Moody Teal Enamel A 2mm genuine stone cluster and a 3.5mm enamel cluster are connected by a cable chain in this versatile design. Chain measures 9mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. Multi-point press-fit ends are composed of two connected decorative ends. Therefore, you will need to purchase two press-fit posts for multi-point press-fit ends to ensure that both decorative ends have a corresponding post. https://infinitebody.com/products/duplex-double-press-fit-end-in-gold-from-pupil-hall?variant=50645981954357 https://infinitebody.com/cdn/shop/files/DuplexDoublePFEYGMoodyTealEnamelBlueDiamondPupilHall.jpg?v=1740601812&width=1024 Pupil Hall new in_stock 264.00 USD 196 50645051932981 Double Beaded Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 36mm / 14k Yellow Gold Two complementary lengths of faceted bead chain form sweeping arcs between two jump rings.Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/double-beaded-lynx-chain-in-gold-from-pupil-hall?variant=50645051932981 https://infinitebody.com/cdn/shop/files/DoubleBeadedLynxChainYGPupilHall.jpg?v=1740601725&width=1024 Pupil Hall new in_stock 180.00 USD 196 50644988821813 Beaded Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 28mm / 14k Yellow Gold A twinkling strand of faceted bead chain suspended between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/beaded-lynx-chain-in-gold-from-pupil-hall?variant=50644988821813 https://infinitebody.com/cdn/shop/files/BeadedLynxChainYGPupilHall.jpg?v=1740601549&width=1024 Pupil Hall new in_stock 124.00 USD 196 50644988854581 Beaded Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 37mm / 14k Yellow Gold A twinkling strand of faceted bead chain suspended between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/beaded-lynx-chain-in-gold-from-pupil-hall?variant=50644988854581 https://infinitebody.com/cdn/shop/files/BeadedLynxChainYGPupilHall.jpg?v=1740601549&width=1024 Pupil Hall new in_stock 142.00 USD 196 50644988887349 Beaded Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 40mm / 14k Yellow Gold A twinkling strand of faceted bead chain suspended between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/beaded-lynx-chain-in-gold-from-pupil-hall?variant=50644988887349 https://infinitebody.com/cdn/shop/files/BeadedLynxChainYGPupilHall.jpg?v=1740601549&width=1024 Pupil Hall new in_stock 142.00 USD 196 50644867350837 Instant Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold A pair of asymmetrical solid gold bar charms sway enticingly from a cluster of jump rings. Measures approximately 26mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/instant-charm-in-gold-from-pupil-hall?variant=50644867350837 https://infinitebody.com/cdn/shop/files/InstantCharmWGPupilHall.jpg?v=1740516551&width=1024 Pupil Hall new in_stock 198.00 USD 196 50644867416373 Instant Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold A pair of asymmetrical solid gold bar charms sway enticingly from a cluster of jump rings. Measures approximately 26mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/instant-charm-in-gold-from-pupil-hall?variant=50644867416373 https://infinitebody.com/cdn/shop/files/InstantCharmYGPupilHall.jpg?v=1740516551&width=1024 Pupil Hall new in_stock 198.00 USD 196 50680638013749 Mega Two Faced Press-fit End in Gold from Pupil Hall - 14k White Gold / Green Zircon A dynamic 3mm genuine stone charm is suspended from two 2.5mm solid gold beads. Measures 3mm by 11mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-two-faced-press-fit-end-in-gold-from-pupil-hall?variant=50680638013749 https://infinitebody.com/cdn/shop/files/MegaTwoFacedPFEWGGreenZirconPupilHall_be4c9bee-2549-49c2-91c6-de6cb591424f.jpg?v=1741116692&width=1024 Pupil Hall new in_stock 228.00 USD 196 50680637915445 Mega Two Faced Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Green Zircon A dynamic 3mm genuine stone charm is suspended from two 2.5mm solid gold beads. Measures 3mm by 11mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mega-two-faced-press-fit-end-in-gold-from-pupil-hall?variant=50680637915445 https://infinitebody.com/cdn/shop/files/MegaTwoFacedPFEYGGreenZirconPupilHall_aa987f54-7846-4952-b975-cc9df8ed9f66.jpg?v=1741116706&width=1024 Pupil Hall new in_stock 228.00 USD 196 50638600536373 The Upside Down Major with Chain Press-fit End in Gold from Pupil Hall - 14k Rose Gold / Black Diamond A refined pairing of a 1.5mm round-cut genuine stone and a 2.5mm reverse-set genuine stone accented by a draped cable chain. Measures approximately 5.5mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/the-upside-down-major-with-chain-press-fit-end-in-gold-from-pupil-hall?variant=50638600536373 https://infinitebody.com/cdn/shop/files/UpsideDownMajorPFERGBlackDiamondPupilHall.jpg?v=1740514297&width=1024 Pupil Hall new in_stock 290.00 USD 196 50638600732981 The Upside Down Major with Chain Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Black Diamond A refined pairing of a 1.5mm round-cut genuine stone and a 2.5mm reverse-set genuine stone accented by a draped cable chain. Measures approximately 5.5mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/the-upside-down-major-with-chain-press-fit-end-in-gold-from-pupil-hall?variant=50638600732981 https://infinitebody.com/cdn/shop/files/UpsideDownMajorPFEYGBlackDiamondPupilHall.jpg?v=1740514297&width=1024 Pupil Hall new in_stock 290.00 USD 196 50637686997301 Cone Spike Threaded End in Titanium Anodized Gold from Industrial Strength - 16g (1.2mm) / 1/8" A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/cone-spike-threaded-end-in-titanium-anodized-gold-from-industrial-strength?variant=50637686997301 https://infinitebody.com/cdn/shop/files/ConeSpikeThreadedEndTIAnodizedGoldGroupIndustrialStrength.jpg?v=1740421715&width=1024 Industrial Strength new in_stock 18.00 USD 196 50637686571317 Cone Spike Threaded End in Titanium Anodized Gold from Industrial Strength - 14g (1.6mm) / 1/8" A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/cone-spike-threaded-end-in-titanium-anodized-gold-from-industrial-strength?variant=50637686571317 https://infinitebody.com/cdn/shop/files/ConeSpikeThreadedEndTIAnodizedGoldGroupIndustrialStrength.jpg?v=1740421715&width=1024 Industrial Strength new in_stock 18.00 USD 196 50637686898997 Cone Spike Threaded End in Titanium Anodized Gold from Industrial Strength - 14g (1.6mm) / 5/32" A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/cone-spike-threaded-end-in-titanium-anodized-gold-from-industrial-strength?variant=50637686898997 https://infinitebody.com/cdn/shop/files/ConeSpikeThreadedEndTIAnodizedGoldGroupIndustrialStrength.jpg?v=1740421715&width=1024 Industrial Strength new in_stock 18.00 USD 196 50637686964533 Cone Spike Threaded End in Titanium Anodized Gold from Industrial Strength - 14g (1.6mm) / 3/16" A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/cone-spike-threaded-end-in-titanium-anodized-gold-from-industrial-strength?variant=50637686964533 https://infinitebody.com/cdn/shop/files/ConeSpikeThreadedEndTIAnodizedGoldGroupIndustrialStrength.jpg?v=1740421715&width=1024 Industrial Strength new in_stock 18.00 USD 196 51441699520821 Curved Threaded Barbell Shaft in Titanium from Anatometal - 12g (2mm) / 1/4" A high polish internally threaded curved barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI).Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-anatometal?variant=51441699520821 https://infinitebody.com/cdn/shop/files/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1734467487&width=1024 Anatometal new in_stock 24.00 USD 196 50392435228981 Curved Threaded Barbell Shaft in Titanium from Anatometal - 12g (2mm) / 5/16" A high polish internally threaded curved barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI).Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-anatometal?variant=50392435228981 https://infinitebody.com/cdn/shop/files/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1734467487&width=1024 Anatometal new in_stock 24.00 USD 196 51441826169141 Curved Threaded Barbell Shaft in Titanium from Anatometal - 6g (4mm) / 5/16" A high polish internally threaded curved barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI).Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-anatometal?variant=51441826169141 https://infinitebody.com/cdn/shop/files/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1734467487&width=1024 Anatometal new in_stock 53.00 USD 196 50255670477109 Zeta 03 Charm in Gold from Tether Jewelry - 16g (1.2mm) / 14k Yellow Gold A solid gold, rounded triangle sits within a textured border in this striking design. Measures approximately 7mm long including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/zeta-03-charm-in-gold-from-tether-jewelry?variant=50255670477109 https://infinitebody.com/cdn/shop/files/Zeta03CharmYGTether.jpg?v=1731690680&width=1024 Tether Jewelry new in_stock 120.00 USD 196 50122227188021 Traveler Ultimate Press-fit End in Gold from Seasons Handmade - 14k White Gold / Diamond A raised central dome holds seven 0.75mm genuine stones surrounded by a ring of textured gold. Measures 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/traveler-ultimate-press-fit-end-in-gold-from-seasons-handmade?variant=50122227188021 https://infinitebody.com/cdn/shop/files/TravelerUltimatePFEWGDiamondSeasonsHandmade.jpg?v=1728484490&width=1024 Seasons Handmade new in_stock 300.00 USD 196 50121858285877 Beaded Hammered Bar Press-fit End in Gold from Seasons Handmade - 14k White Gold A recessed, stippled surface is surrounded by a textured perimeter in this striking press-fit end. Measures 3mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/beaded-hammered-bar-press-fit-end-in-gold-from-seasons-handmade?variant=50121858285877 https://infinitebody.com/cdn/shop/files/BeadedHammeredBarPFEWGSeasonsHandmade.jpg?v=1728404011&width=1024 Seasons Handmade new in_stock 125.00 USD 196 50121739731253 Beaded Hammered Triangle Press-fit End in Gold from Seasons Handmade - 14k White Gold A simple triangle with a rough surface recessed inside a textured border. Measures approximately 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/beaded-hammered-triangle-press-fit-end-in-gold-from-seasons-handmade?variant=50121739731253 https://infinitebody.com/cdn/shop/files/BeadedHammeredTrianglePFEWGSeasonsHandmade.jpg?v=1728403779&width=1024 Seasons Handmade new in_stock 125.00 USD 196 50060484542773 Hindi Nasira Press-fit End in Gold from Regalia - 18k White Gold A hexagon with a raised interior and a textured border emanates fortitude. Measures approximately 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hindi-nasira-press-fit-end-in-gold-from-regalia?variant=50060484542773 https://infinitebody.com/cdn/shop/files/HindiNasiraPFEWGRegalia.jpg?v=1726854366&width=1024 Regalia new in_stock 136.00 USD 196 50019714662709 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 16mm / 14k White Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019714662709 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainWGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 100.00 USD 196 50019723149621 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 16mm / 14k Rose Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019723149621 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainRGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 100.00 USD 196 50019714564405 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 20mm / 14k Yellow Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019714564405 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainYGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 110.00 USD 196 50019723116853 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 24mm / 14k Rose Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019723116853 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainRGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 130.00 USD 196 50019714400565 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 25mm / 14k Yellow Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019714400565 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainGroupJewelryThisWay.jpg?v=1726007747&width=1024 Jewelry This Way new in_stock 130.00 USD 196 50019714761013 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 26mm / 14k White Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019714761013 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainGroupJewelryThisWay.jpg?v=1726007747&width=1024 Jewelry This Way new in_stock 130.00 USD 196 50019722395957 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 30mm / 14k Rose Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019722395957 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainRGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 150.00 USD 196 50019722363189 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 35mm / 14k Rose Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019722363189 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainRGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 160.00 USD 196 50019714629941 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 16g (1.2mm) / 40mm / 14k Yellow Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019714629941 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainYGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 160.00 USD 196 50019714433333 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 12g (2mm) / 28mm / 14k Yellow Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019714433333 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainYGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 100.00 USD 196 50019722264885 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 12g (2mm) / 28mm / 14k White Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019722264885 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainWGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 100.00 USD 196 50019714466101 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 12g (2mm) / 30mm / 14k Yellow Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019714466101 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainYGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 100.00 USD 196 50019722297653 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 12g (2mm) / 30mm / 14k White Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019722297653 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainGroupJewelryThisWay.jpg?v=1726007747&width=1024 Jewelry This Way new in_stock 100.00 USD 196 50019714498869 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 12g (2mm) / 34mm / 14k Yellow Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019714498869 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainYGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 100.00 USD 196 50019722330421 Diamond-cut Singapore Chain in Gold from Jewelry This Way - 12g (2mm) / 34mm / 14k White Gold Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold individually. Barbell not included. https://infinitebody.com/products/diamond-cut-singapore-chain-in-gold-from-jewelry-this-way?variant=50019722330421 https://infinitebody.com/cdn/shop/files/DiamondCutSingaporeChainWGJewelryThisWay.jpg?v=1726007743&width=1024 Jewelry This Way new in_stock 100.00 USD 196 49992036090165 Roulette Press-fit End in Gold from Ember Body Jewelry - 14k White Gold / Clear CZ Seven pavé-set faceted stones are held on the face of a solid gold disk with a textured edge. Measures 4.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/roulette-press-fit-end-in-gold-from-ember-body-jewelry?variant=49992036090165 https://infinitebody.com/cdn/shop/files/RoulettePFEWGCZEmberBodyJewelry.jpg?v=1725461630&width=1024 Ember Body Jewelry new in_stock 170.00 USD 196 49992036122933 Roulette Press-fit End in Gold from Ember Body Jewelry - 14k Yellow Gold / Clear CZ Seven pavé-set faceted stones are held on the face of a solid gold disk with a textured edge. Measures 4.5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/roulette-press-fit-end-in-gold-from-ember-body-jewelry?variant=49992036122933 https://infinitebody.com/cdn/shop/files/RoulettePFEYGCZEmberBodyJewelry.jpg?v=1725461630&width=1024 Ember Body Jewelry new in_stock 170.00 USD 196 49959969423669 Elixir Press-fit End in Gold from Maya Jewelry - 14k White Gold A weathered teardrop, elegant yet gritty. Measures 2.5mm by 4mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/elixir-press-fit-end-in-gold-from-maya-jewelry?variant=49959969423669 https://infinitebody.com/cdn/shop/files/ElixirPFEWGMaya.jpg?v=1724790220&width=1024 Maya Jewelry new in_stock 110.00 USD 196 51128746475829 Sunray Kite Press-fit End in Gold from Quetzalli - 14k Rose Gold / Medium A laser-cut, diamond-shaped kite with a surface that playfully reflects light rays. Small measures approximately 1.5mm by 4.5mm.Medium measures 2.5mm by 5.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sunray-kite-press-fit-end-in-gold-from-quetzalli?variant=51128746475829 https://infinitebody.com/cdn/shop/files/SunrayKitePFERGQuetzalli.jpg?v=1752878782&width=1024 Quetzalli new in_stock 120.00 USD 196 52789039137077 Sunray Heart Press-fit End in Gold from Quetzalli - 14k White Gold A mesmerizing array of laser-cut beams adorn the surface of a solid gold heart. Measures 4mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sunray-heart-press-fit-end-in-gold-from-quetzalli?variant=52789039137077 https://infinitebody.com/cdn/shop/files/SunrayHeartPFEWGQuetzalli_876ddcf2-24b2-45de-ab3b-d871848eef44.jpg?v=1778163554&width=1024 Quetzalli new in_stock 126.00 USD 196 49934564196661 Claw-set Stone Press-fit End in Titanium from People’s Jewelry - 14g/12g / Amethyst / 4mm A dynamic, implant-grade titanium claw setting clasps a genuine stone bead. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post. https://infinitebody.com/products/claw-set-stone-press-fit-end-in-titanium-from-people-s-jewelry?variant=49934564196661 https://infinitebody.com/cdn/shop/files/ClawsetStonePFEndAmethystPeoplesJewelry.jpg?v=1724187014&width=1024 People's Jewelry new in_stock 30.00 USD 196 49934564262197 Claw-set Stone Press-fit End in Titanium from People’s Jewelry - 14g/12g / Labradorite / 4mm A dynamic, implant-grade titanium claw setting clasps a genuine stone bead. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post. https://infinitebody.com/products/claw-set-stone-press-fit-end-in-titanium-from-people-s-jewelry?variant=49934564262197 https://infinitebody.com/cdn/shop/files/ClawsetStonePFEndLabradoritePeoplesJewelry.jpg?v=1748628373&width=1024 People's Jewelry new in_stock 30.00 USD 196 49934564294965 Claw-set Stone Press-fit End in Titanium from People’s Jewelry - 14g/12g / Smoky Quartz / 4mm A dynamic, implant-grade titanium claw setting clasps a genuine stone bead. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post. https://infinitebody.com/products/claw-set-stone-press-fit-end-in-titanium-from-people-s-jewelry?variant=49934564294965 https://infinitebody.com/cdn/shop/files/ClawsetStonePFEndSmokyQuartzPeoplesJewelry.jpg?v=1748628373&width=1024 People's Jewelry new in_stock 30.00 USD 196 52907426152757 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 18g/16g / Carnelian / 3mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907426152757 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndCarnelian3mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 24.00 USD 196 52907426054453 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 18g/16g / Hematite / 3mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907426054453 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndHematite3mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 24.00 USD 196 52907426087221 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 18g/16g / Rose Quartz / 3mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907426087221 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndRoseQuartz3mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 24.00 USD 196 52907424547125 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 14g/12g / Hematite / 4mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907424547125 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndHematite4mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 32.00 USD 196 52907424776501 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 14g/12g / Moonstone / 4mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907424776501 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndMoonstone4mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 32.00 USD 196 52907424842037 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 14g/12g / Moss Agate / 4mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907424842037 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndMossAgate4mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 32.00 USD 196 52907424579893 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 14g/12g / Rainbow Moonstone / 4mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907424579893 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndRainbowMoonstone4mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 32.00 USD 196 52907424809269 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 14g/12g / Rutilated Quartz / 4mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907424809269 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndRutilatedQuartz4mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 32.00 USD 196 52907424612661 Claw-set Stone Threaded End in Titanium from People’s Jewelry - 14g/12g / Smoky Quartz / 4mm A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color.Sold as singles. For a pair, order a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/claw-set-stone-threaded-end-in-titanium-from-people-s-jewelry?variant=52907424612661 https://infinitebody.com/cdn/shop/files/ClawsetStoneThreadedEndSmokyQuartz4mmPeoplesJewelry.jpg?v=1779293362&width=1024 People's Jewelry new in_stock 32.00 USD 196 49932764807477 Double Illusion Clicker in Titanium from Zadamer Jewelry - 18g (1mm) / 1/4" / High Polish A singular implant-grade titanium ring with an adjoined partial ring provides the illusion of wearing two rings at once in this dynamic design.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/double-illusion-clicker-in-titanium-from-zadamer-jewelry?variant=49932764807477 https://infinitebody.com/cdn/shop/files/DoubleIllusionClickerGroupTether.jpg?v=1724163247&width=1024 Zadamer Jewelry new in_stock 60.00 USD 196 49932764840245 Double Illusion Clicker in Titanium from Zadamer Jewelry - 18g (1mm) / 9/32" / High Polish A singular implant-grade titanium ring with an adjoined partial ring provides the illusion of wearing two rings at once in this dynamic design.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/double-illusion-clicker-in-titanium-from-zadamer-jewelry?variant=49932764840245 https://infinitebody.com/cdn/shop/files/DoubleIllusionClickerGroupTether.jpg?v=1724163247&width=1024 Zadamer Jewelry new in_stock 60.00 USD 196 49932764873013 Double Illusion Clicker in Titanium from Zadamer Jewelry - 18g (1mm) / 5/16" / High Polish A singular implant-grade titanium ring with an adjoined partial ring provides the illusion of wearing two rings at once in this dynamic design.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/double-illusion-clicker-in-titanium-from-zadamer-jewelry?variant=49932764873013 https://infinitebody.com/cdn/shop/files/DoubleIllusionClickerGroupTether.jpg?v=1724163247&width=1024 Zadamer Jewelry new in_stock 60.00 USD 196 49932764905781 Double Illusion Clicker in Titanium from Zadamer Jewelry - 18g (1mm) / 11/32" / High Polish A singular implant-grade titanium ring with an adjoined partial ring provides the illusion of wearing two rings at once in this dynamic design.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/double-illusion-clicker-in-titanium-from-zadamer-jewelry?variant=49932764905781 https://infinitebody.com/cdn/shop/files/DoubleIllusionClickerGroupTether.jpg?v=1724163247&width=1024 Zadamer Jewelry new in_stock 60.00 USD 196 49932764938549 Double Illusion Clicker in Titanium from Zadamer Jewelry - 18g (1mm) / 3/8" / High Polish A singular implant-grade titanium ring with an adjoined partial ring provides the illusion of wearing two rings at once in this dynamic design.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/double-illusion-clicker-in-titanium-from-zadamer-jewelry?variant=49932764938549 https://infinitebody.com/cdn/shop/files/DoubleIllusionClickerGroupTether.jpg?v=1724163247&width=1024 Zadamer Jewelry new in_stock 60.00 USD 196 49902378942773 Slim Bitty Charm in Gold from Pupil Hall - 18g (1mm) / 14k Rose Gold A slender bead charm anchors a short length of cable chain in this fluid design that is polished yet playful. Measures 17mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/slim-bitty-charm-in-gold-from-pupil-hall?variant=49902378942773 https://infinitebody.com/cdn/shop/files/SlimBittyCharmRGPupilHall.jpg?v=1723672268&width=1024 Pupil Hall new in_stock 128.00 USD 196 49902271430965 Double Bada Seam Ring in Gold from Pupil Hall - 18g (1mm) / 11/32" / 14k Yellow Gold A unique mash-up of box chain and faceted bead chain are highlighted by a sturdy cable chain below a high-polished ring.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/double-bada-seam-ring-in-gold-from-pupil-hall?variant=49902271430965 https://infinitebody.com/cdn/shop/files/DoubleBadaSRYGPupilHall.jpg?v=1723671694&width=1024 Pupil Hall new in_stock 254.00 USD 196 49541613584693 Merida Press-fit End in Gold from Buddha Jewelry - 14k White Gold / Clear CZ A fragmented arrow adorned with 0.9mm, 1mm, and 1.2mm gemstones connected by a delicate length of cable chain embodies fluidity and whimsy. Measures 3.5mm by 22.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/merida-press-fit-end-in-gold-from-buddha-jewelry?variant=49541613584693 https://infinitebody.com/cdn/shop/files/MeridaPFEWGCZBuddha.jpg?v=1718394949&width=1024 Buddha Jewelry new in_stock 250.00 USD 196 49540590666037 Bee Chic Press-fit End in Gold from Buddha Jewelry - 14k White Gold / Clear CZ A realistic, yet whimsical depiction of a bee complete with a 1mm gemstone head and a 2mm by 3mm gemstone body. Measures 6mm by 8mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/bee-chic-press-fit-end-in-gold-from-buddha-jewelry?variant=49540590666037 https://infinitebody.com/cdn/shop/files/BeeChicPFEGroupBuddha.jpg?v=1718384952&width=1024 Buddha Jewelry new in_stock 190.00 USD 196 50735755166005 Double Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 32mm Two curb chains of varying lengths are suspended from jump rings on either end. Perfect for adding a bit of drama to a healed piercing.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/double-titanium-curb-chain-from-jewelry-this-way?variant=50735755166005 https://infinitebody.com/cdn/shop/files/JewelryThisWayVariant1.jpg?v=1742411180&width=1024 Jewelry This Way new in_stock 85.00 USD 196 50735757918517 Double Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 36mm Two curb chains of varying lengths are suspended from jump rings on either end. Perfect for adding a bit of drama to a healed piercing.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/double-titanium-curb-chain-from-jewelry-this-way?variant=50735757918517 https://infinitebody.com/cdn/shop/files/JewelryThisWayVariant1.jpg?v=1742411180&width=1024 Jewelry This Way new in_stock 85.00 USD 196 50735757984053 Double Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 38mm Two curb chains of varying lengths are suspended from jump rings on either end. Perfect for adding a bit of drama to a healed piercing.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/double-titanium-curb-chain-from-jewelry-this-way?variant=50735757984053 https://infinitebody.com/cdn/shop/files/JewelryThisWayVariant1.jpg?v=1742411180&width=1024 Jewelry This Way new in_stock 85.00 USD 196 50735761064245 Double Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 40mm Two curb chains of varying lengths are suspended from jump rings on either end. Perfect for adding a bit of drama to a healed piercing.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/double-titanium-curb-chain-from-jewelry-this-way?variant=50735761064245 https://infinitebody.com/cdn/shop/files/JewelryThisWayVariant1.jpg?v=1742411180&width=1024 Jewelry This Way new in_stock 85.00 USD 196 50735761031477 Double Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 41mm Two curb chains of varying lengths are suspended from jump rings on either end. Perfect for adding a bit of drama to a healed piercing.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/double-titanium-curb-chain-from-jewelry-this-way?variant=50735761031477 https://infinitebody.com/cdn/shop/files/JewelryThisWayVariant1.jpg?v=1742411180&width=1024 Jewelry This Way new in_stock 85.00 USD 196 49523596263733 Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 36mm Add fluidity and texture to your setup with a single curb chain suspended between two jump rings.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/titanium-curb-chain-from-jewelry-this-way?variant=49523596263733 https://infinitebody.com/cdn/shop/files/TitaniumCurbChain18gSizeDetailJewelryThisWay.jpg?v=1718207743&width=1024 Jewelry This Way new in_stock 65.00 USD 196 49523596296501 Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 37mm Add fluidity and texture to your setup with a single curb chain suspended between two jump rings.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/titanium-curb-chain-from-jewelry-this-way?variant=49523596296501 https://infinitebody.com/cdn/shop/files/TitaniumCurbChain12gSizeDetailJewelryThisWay.jpg?v=1718207743&width=1024 Jewelry This Way new in_stock 65.00 USD 196 49523596362037 Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 41mm Add fluidity and texture to your setup with a single curb chain suspended between two jump rings.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/titanium-curb-chain-from-jewelry-this-way?variant=49523596362037 https://infinitebody.com/cdn/shop/files/TitaniumCurbChain18gSizeDetailJewelryThisWay.jpg?v=1718207743&width=1024 Jewelry This Way new in_stock 65.00 USD 196 49524655620405 Titanium Curb Chain from Jewelry This Way - 16g (1.2mm) / 40mm Add fluidity and texture to your setup with a single curb chain suspended between two jump rings.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/titanium-curb-chain-from-jewelry-this-way?variant=49524655620405 https://infinitebody.com/cdn/shop/files/TitaniumCurbChain18gSizeDetailJewelryThisWay.jpg?v=1718207743&width=1024 Jewelry This Way new in_stock 65.00 USD 196 49516835012917 Triple Marquise Press-fit End in Titanium from Diablo Organics - Medium A low profile trio of high-polished titanium petals form the shape of a fan. Medium measures 4mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/triple-marquise-press-fit-end-in-titanium-from-diablo-organics?variant=49516835012917 https://infinitebody.com/cdn/shop/files/MarquisePFETiDiablo.jpg?v=1718135553&width=1024 Diablo Organics new in_stock 30.00 USD 196 49516787007797 Dagger Press-fit End in Titanium from Diablo Organics - Medium A small but mighty rendering of a classic dagger with a textured hilt and high-polished blade.Medium measures 4mm by 8mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/dagger-press-fit-end-in-titanium-from-diablo-organics?variant=49516787007797 https://infinitebody.com/cdn/shop/files/DaggerPFETiDiablo.jpg?v=1718134648&width=1024 Diablo Organics new in_stock 40.00 USD 196 49516318949685 Moonstone Teardrop Press-Fit End in Gold from Diablo Organics - 18k Yellow Gold / Large Genuine pear-cut moonstone sits in a barely-there halo of solid gold, perfect for showing off the stone’s natural beauty. This big and bold moonstone cabochon ranges in color from deep violet to soft teal, with subtle flecks of amber that shine through as it catches the light at different angles.Large measures approximately 5.5mm by 7.5mm across, and 5mm tall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/moonstone-teardrop-press-fit-end-in-gold-from-diablo-organics?variant=49516318949685 https://infinitebody.com/cdn/shop/files/MoonstoneTeardropPFEYGMoonstoneDiablo.jpg?v=1718125942&width=1024 Diablo Organics new in_stock 750.00 USD 196 49515916099893 Dagger Drop Press-fit End in Titanium from Diablo Organics - Red CZ A combination of grit and elegance, with a 2.5mm by 3.5mm pear-cut gemstone dangling from a dagger with a subtly textured hilt. Measures approximately 3.5mm by 15mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/dagger-drop-press-fit-end-in-titanium-from-diablo-organics?variant=49515916099893 https://infinitebody.com/cdn/shop/files/DaggerDropPFETiRedCZDiabloOrganics.jpg?v=1718117529&width=1024 Diablo Organics new in_stock 50.00 USD 196 49497108447541 Crown Press-fit End in Titanium from Diablo Organics - Clear CZ A bold arch of alternating 1.5mm by 3.5mm and 3.5mm by 4.5mm marquise-cut gemstones set in implant-grade titanium. Measures 8mm by 14mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/crown-press-fit-end-in-titanium-from-diablo-organics?variant=49497108447541 https://infinitebody.com/cdn/shop/files/CrownPFETiCZDiablo.jpg?v=1717797288&width=1024 Diablo Organics new in_stock 45.00 USD 196 49412891279669 Wavelength Crescent Moon Press-fit End from Black Forest Jewelry - Black Niobium / High Polish / 5mm Organic indentations cover the surface of a full crescent moon.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/wavelength-crescent-moon-press-fit-end-from-black-forest-jewelry?variant=49412891279669 https://infinitebody.com/cdn/shop/files/WavelengthCrescentMoonPFEBlackNiobiumBlackForestJewelry.jpg?v=1717007693&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49412223107381 Matte Seam Ring from Black Forest Jewelry - 16g (1.2mm) / 9/32" / Black Niobium  A textured matte finish brings a new take to an old classic for a more subdued look.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/matte-seam-ring-from-black-forest-jewelry?variant=49412223107381 https://infinitebody.com/cdn/shop/files/MatteSeamRingGroupBlackNiobiumBlackForestJewelry.jpg?v=1717003828&width=1024 Black Forest Jewelry new in_stock 20.00 USD 196 49396870971701 Ball Press-fit End from Black Forest Jewelry - Black Niobium / High Polish / 2mm  A time-honored design available with a flat matte finish or classic high polish.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ball-press-fit-end-from-black-forest-jewelry?variant=49396870971701 https://infinitebody.com/cdn/shop/files/BallEndPFEHighPolishBlackNiobiumBlackForestJewelry.jpg?v=1716922754&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396871004469 Ball Press-fit End from Black Forest Jewelry - Black Niobium / High Polish / 2.5mm  A time-honored design available with a flat matte finish or classic high polish.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ball-press-fit-end-from-black-forest-jewelry?variant=49396871004469 https://infinitebody.com/cdn/shop/files/BallEndPFEHighPolishBlackNiobiumBlackForestJewelry.jpg?v=1716922754&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396871037237 Ball Press-fit End from Black Forest Jewelry - Black Niobium / High Polish / 3mm  A time-honored design available with a flat matte finish or classic high polish.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ball-press-fit-end-from-black-forest-jewelry?variant=49396871037237 https://infinitebody.com/cdn/shop/files/BallEndPFEGroupBlackForestJewelry.jpg?v=1716922753&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396871070005 Ball Press-fit End from Black Forest Jewelry - Black Niobium / Matte / 2mm  A time-honored design available with a flat matte finish or classic high polish.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ball-press-fit-end-from-black-forest-jewelry?variant=49396871070005 https://infinitebody.com/cdn/shop/files/BallEndPFEMatteBlackNiobiumBlackForestJewelry.jpg?v=1716922754&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396871102773 Ball Press-fit End from Black Forest Jewelry - Black Niobium / Matte / 2.5mm  A time-honored design available with a flat matte finish or classic high polish.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ball-press-fit-end-from-black-forest-jewelry?variant=49396871102773 https://infinitebody.com/cdn/shop/files/BallEndPFEGroupBlackForestJewelry.jpg?v=1716922753&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396871135541 Ball Press-fit End from Black Forest Jewelry - Black Niobium / Matte / 3mm  A time-honored design available with a flat matte finish or classic high polish.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ball-press-fit-end-from-black-forest-jewelry?variant=49396871135541 https://infinitebody.com/cdn/shop/files/BallEndPFEGroupBlackForestJewelry.jpg?v=1716922753&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396776730933 Wavelength Disk Press-fit End from Black Forest Jewelry - Black Niobium / 2mm A scored surface produces a unique texture that makes each piece one-of-a-kind.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/wavelength-disk-press-fit-end-from-black-forest-jewelry?variant=49396776730933 https://infinitebody.com/cdn/shop/files/WavelengthDiskPFEBlackNiobiumSizingDetailBlackForestJewelry.jpg?v=1716917955&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396776763701 Wavelength Disk Press-fit End from Black Forest Jewelry - Black Niobium / 2.5mm A scored surface produces a unique texture that makes each piece one-of-a-kind.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/wavelength-disk-press-fit-end-from-black-forest-jewelry?variant=49396776763701 https://infinitebody.com/cdn/shop/files/WavelengthDiskPFEGroupBlackForestJewelry.jpg?v=1716917955&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396776796469 Wavelength Disk Press-fit End from Black Forest Jewelry - Black Niobium / 3mm A scored surface produces a unique texture that makes each piece one-of-a-kind.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/wavelength-disk-press-fit-end-from-black-forest-jewelry?variant=49396776796469 https://infinitebody.com/cdn/shop/files/WavelengthDiskPFEGroupBlackForestJewelry.jpg?v=1716917955&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396776829237 Wavelength Disk Press-fit End from Black Forest Jewelry - Black Niobium / 4mm A scored surface produces a unique texture that makes each piece one-of-a-kind.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/wavelength-disk-press-fit-end-from-black-forest-jewelry?variant=49396776829237 https://infinitebody.com/cdn/shop/files/WavelengthDiskPFEBlackNiobiumSizingDetailBlackForestJewelry.jpg?v=1716917955&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396665090357 Hammered Disk Press-fit End from Black Forest Jewelry - Black Niobium / 2mm Hammered impressions span the surface of a flat disk.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-from-black-forest-jewelry?variant=49396665090357 https://infinitebody.com/cdn/shop/files/HammeredDiskPFESizeDetailBlackForestJewelry.jpg?v=1716916951&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396665123125 Hammered Disk Press-fit End from Black Forest Jewelry - Black Niobium / 2.5mm Hammered impressions span the surface of a flat disk.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-from-black-forest-jewelry?variant=49396665123125 https://infinitebody.com/cdn/shop/files/HammeredDiskPFESizeDetailBlackForestJewelry.jpg?v=1716916951&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396665155893 Hammered Disk Press-fit End from Black Forest Jewelry - Black Niobium / 3mm Hammered impressions span the surface of a flat disk.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-from-black-forest-jewelry?variant=49396665155893 https://infinitebody.com/cdn/shop/files/HammeredDiskPFEGroupBlackForestJewelry.jpg?v=1716916951&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 49396665188661 Hammered Disk Press-fit End from Black Forest Jewelry - Black Niobium / 4mm Hammered impressions span the surface of a flat disk.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-disk-press-fit-end-from-black-forest-jewelry?variant=49396665188661 https://infinitebody.com/cdn/shop/files/HammeredDiskPFEGroupBlackForestJewelry.jpg?v=1716916951&width=1024 Black Forest Jewelry new in_stock 35.00 USD 196 52900766843189 Ombligo Charm in Gold from Hialeah - 10g (2.5mm) / 14k Yellow Gold / Amethyst Three variegated chains hang from a bezel-set pear-cut genuine 4x5mm stone. Charm measures approximately 24mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/ombligo-charm-in-gold-from-hialeah?variant=52900766843189 https://infinitebody.com/cdn/shop/files/OmbligoCharmYGAmethystHialeah.jpg?v=1779209294&width=1024 Hialeah new in_stock 135.00 USD 196 52900764320053 Ombligo Charm in Gold from Hialeah - 10g (2.5mm) / 14k Yellow Gold / Blue Topaz Three variegated chains hang from a bezel-set pear-cut genuine 4x5mm stone. Charm measures approximately 24mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/ombligo-charm-in-gold-from-hialeah?variant=52900764320053 https://infinitebody.com/cdn/shop/files/OmbligoCharmYGBlueTopazHialeah.jpg?v=1779209296&width=1024 Hialeah new in_stock 135.00 USD 196 52900764352821 Ombligo Charm in Gold from Hialeah - 10g (2.5mm) / 14k Yellow Gold / Citrine Three variegated chains hang from a bezel-set pear-cut genuine 4x5mm stone. Charm measures approximately 24mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/ombligo-charm-in-gold-from-hialeah?variant=52900764352821 https://infinitebody.com/cdn/shop/files/OmbligoCharmYGCitrineHialeah.jpg?v=1779209294&width=1024 Hialeah new in_stock 135.00 USD 196 48780134711605 Hellas Clicker from Tether Jewelry - 14g (1.6mm) / 5/16" / Rose Gold A high-polished hoop dotted with grooves on its perimeter, both rugged and refined.Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/hellas-clicker-from-tether-jewelry?variant=48780134711605 https://infinitebody.com/cdn/shop/files/HellasClickerRGTether.jpg?v=1713282454&width=1024 Tether Jewelry new in_stock 120.00 USD 196 48780134678837 Hellas Clicker from Tether Jewelry - 14g (1.6mm) / 3/8" / Rose Gold A high-polished hoop dotted with grooves on its perimeter, both rugged and refined.Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/hellas-clicker-from-tether-jewelry?variant=48780134678837 https://infinitebody.com/cdn/shop/files/HellasClickerRGTether.jpg?v=1713282454&width=1024 Tether Jewelry new in_stock 120.00 USD 196 48780134580533 Hellas Clicker from Tether Jewelry - 14g (1.6mm) / 3/8" / Steel A high-polished hoop dotted with grooves on its perimeter, both rugged and refined.Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/hellas-clicker-from-tether-jewelry?variant=48780134580533 https://infinitebody.com/cdn/shop/files/HellasClickerGroupTether.jpg?v=1713282454&width=1024 Tether Jewelry new in_stock 105.00 USD 196 48780134646069 Hellas Clicker from Tether Jewelry - 14g (1.6mm) / 3/8" / Yellow Gold A high-polished hoop dotted with grooves on its perimeter, both rugged and refined.Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/hellas-clicker-from-tether-jewelry?variant=48780134646069 https://infinitebody.com/cdn/shop/files/HellasClickerYGTether.jpg?v=1713282460&width=1024 Tether Jewelry new in_stock 120.00 USD 196 50255867904309 Nazar Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Ruby A 1mm genuine stone sits at the center of an oval radiating with texture. Measures approximately 3mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/nazar-press-fit-end-in-gold-from-tether-jewelry?variant=50255867904309 https://infinitebody.com/cdn/shop/files/NazarPFEGroupTether.jpg?v=1713283640&width=1024 Tether Jewelry new in_stock 160.00 USD 196 48764501426485 Hydro Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold A high-polished teardrop with a subtly faceted surface. Measures approximately 3mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hydro-press-fit-end-in-gold-from-tether-jewelry?variant=48764501426485 https://infinitebody.com/cdn/shop/files/HydroPFEYGTether.jpg?v=1713283490&width=1024 Tether Jewelry new in_stock 130.00 USD 196 51228723478837 Dyna Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Black Diamond A textured diamond-shaped design is crowned with a 2mm prong-set genuine stone. Measures approximately 3mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/dyna-press-fit-end-in-gold-from-tether-jewelry?variant=51228723478837 https://infinitebody.com/cdn/shop/files/DynaPFERGBlackDiamondTether.jpg?v=1755706531&width=1024 Tether Jewelry new in_stock 170.00 USD 196 50255918661941 Dyna Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Ruby A textured diamond-shaped design is crowned with a 2mm prong-set genuine stone. Measures approximately 3mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/dyna-press-fit-end-in-gold-from-tether-jewelry?variant=50255918661941 https://infinitebody.com/cdn/shop/files/DynaPFERGRubyTether.jpg?v=1755706531&width=1024 Tether Jewelry new in_stock 170.00 USD 196 50812171223349 Dyna Press-fit End in Gold from Tether Jewelry - 14k White Gold / Blue Sapphire A textured diamond-shaped design is crowned with a 2mm prong-set genuine stone. Measures approximately 3mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/dyna-press-fit-end-in-gold-from-tether-jewelry?variant=50812171223349 https://infinitebody.com/cdn/shop/files/DynaPFEWGBLUSAPTether.jpg?v=1755706531&width=1024 Tether Jewelry new in_stock 170.00 USD 196 48238145208629 Illuminate Press-fit End in Gold from Maya Jewelry - 14k White Gold / Iolite / Large Simple prongs of solid gold hold a faceted genuine stone in a loving embrace allowing the sparkling stone to take center stage.Small measures approximately 5mm by 5.5mm.Large measures approximately 6mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/illuminate-press-fit-end-in-gold-from-maya-jewelry?variant=48238145208629 https://infinitebody.com/cdn/shop/files/IlluminatePFEWGIoliteMaya.jpg?v=1712870368&width=1024 Maya Jewelry new in_stock 228.00 USD 196 48238145274165 Illuminate Press-fit End in Gold from Maya Jewelry - 14k White Gold / Sunstone / Small Simple prongs of solid gold hold a faceted genuine stone in a loving embrace allowing the sparkling stone to take center stage.Small measures approximately 5mm by 5.5mm.Large measures approximately 6mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/illuminate-press-fit-end-in-gold-from-maya-jewelry?variant=48238145274165 https://infinitebody.com/cdn/shop/files/IlluminatePFEGroupMaya.jpg?v=1712870368&width=1024 Maya Jewelry new in_stock 224.00 USD 196 48237438402869 Punk Rock Girl Press-fit End in Gold from Maya Jewelry - 14k White Gold A taut length of cable link chain for the polished punk. Measures 2mm by 8mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/punk-rock-girl-press-fit-end-in-gold-from-maya-jewelry?variant=48237438402869 https://infinitebody.com/cdn/shop/files/PunkRockGirlPFEGroupMaya.jpg?v=1712870662&width=1024 Maya Jewelry new in_stock 150.00 USD 196 48236516573493 Illuminate with Chains Press-fit End in Gold from Maya Jewelry - 14k Yellow Gold / Iolite / Small Three cable chains in varying lengths are suspended from a talon-set genuine stone adding movement and fluidity to this mesmerizing design.Small measures approximately 5mm by 12mm.Large measures approximately 6mm by 18mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/illuminate-with-chains-press-fit-end-in-gold-from-maya-jewelry?variant=48236516573493 https://infinitebody.com/cdn/shop/files/IlluminateWithChainsPFEYGIoliteMaya.jpg?v=1712870470&width=1024 Maya Jewelry new in_stock 271.00 USD 196 48225143816501 Tadbit Press-fit End in Gold from Regalia - 18k White Gold / Large A flattened portrayal of a 3-dimensional cube with high-polished faces and pronounced seams creates a subtle trick of the eye.Small measures approximately 3.5mm by 4mm.Large measures approximately 4.5mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/tadbit-press-fit-end-in-gold-from-regalia?variant=48225143816501 https://infinitebody.com/cdn/shop/files/TadbitPFEWGRegalia.jpg?v=1712868996&width=1024 Regalia new in_stock 145.00 USD 196 48225143750965 Tadbit Press-fit End in Gold from Regalia - 18k Yellow Gold / Large A flattened portrayal of a 3-dimensional cube with high-polished faces and pronounced seams creates a subtle trick of the eye.Small measures approximately 3.5mm by 4mm.Large measures approximately 4.5mm by 5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/tadbit-press-fit-end-in-gold-from-regalia?variant=48225143750965 https://infinitebody.com/cdn/shop/files/TadbitPFEYGRegalia.jpg?v=1712868995&width=1024 Regalia new in_stock 145.00 USD 196 48225025556789 Perambula Press-fit End in Gold from Regalia - 18k White Gold A tapered grouping of solid gold beads in varying sizes radiates dimensional artistry. Measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/perambula-press-fit-end-in-gold-from-regalia?variant=48225025556789 https://infinitebody.com/cdn/shop/files/PerambulaPFEGroupRegalia.jpg?v=1712868914&width=1024 Regalia new in_stock 130.00 USD 196 48167819313461 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 3/16" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819313461 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819346229 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 3/16" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819346229 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819378997 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 7/32" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819378997 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819411765 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 7/32" / 14k White Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819411765 https://infinitebody.com/cdn/shop/files/GoldSeamRingWGVira.jpg?v=1742229532&width=1024 Vira Jewelry new in_stock 150.00 USD 196 48167818953013 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 7/32" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167818953013 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167820001589 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 1/4" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167820001589 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819837749 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 1/4" / 14k White Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819837749 https://infinitebody.com/cdn/shop/files/SeamRingGoldGroupVira.jpg?v=1742229966&width=1024 Vira Jewelry new in_stock 150.00 USD 196 48167818887477 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 1/4" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167818887477 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819116853 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 9/32" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819116853 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819870517 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 9/32" / 14k White Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819870517 https://infinitebody.com/cdn/shop/files/GoldSeamRingWGVira.jpg?v=1742229532&width=1024 Vira Jewelry new in_stock 150.00 USD 196 48167819051317 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 9/32" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819051317 https://infinitebody.com/cdn/shop/files/SeamRingGoldGroupVira.jpg?v=1742229966&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819018549 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 5/16" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819018549 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819903285 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 5/16" / 14k White Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819903285 https://infinitebody.com/cdn/shop/files/GoldSeamRingWGVira.jpg?v=1742229532&width=1024 Vira Jewelry new in_stock 150.00 USD 196 48167818789173 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 5/16" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167818789173 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819149621 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 11/32" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819149621 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167818821941 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 11/32" / 14k White Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167818821941 https://infinitebody.com/cdn/shop/files/GoldSeamRingWGVira.jpg?v=1742229532&width=1024 Vira Jewelry new in_stock 150.00 USD 196 48167818854709 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 11/32" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167818854709 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819968821 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 3/8" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819968821 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819936053 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 3/8" / 14k White Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819936053 https://infinitebody.com/cdn/shop/files/GoldSeamRingWGVira.jpg?v=1742229532&width=1024 Vira Jewelry new in_stock 150.00 USD 196 48167818920245 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 3/8" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167818920245 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167818985781 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 13/32" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167818985781 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819706677 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 7/16" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819706677 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819084085 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 7/16" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819084085 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819182389 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 1/2" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819182389 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819739445 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 1/2" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819739445 https://infinitebody.com/cdn/shop/files/SeamRingGoldGroupVira.jpg?v=1742229966&width=1024 Vira Jewelry new in_stock 170.00 USD 196 48167819477301 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 7/32" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819477301 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 110.00 USD 196 48167819510069 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 1/4" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819510069 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 110.00 USD 196 48167819247925 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 1/4" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819247925 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 110.00 USD 196 48167819575605 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 5/16" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819575605 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819280693 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 5/16" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819280693 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819542837 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 3/8" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819542837 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 48167819641141 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 7/16" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819641141 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 175.00 USD 196 48167819215157 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 1/2" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819215157 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 175.00 USD 196 48167819804981 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 5/8" / 14k Yellow Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=48167819804981 https://infinitebody.com/cdn/shop/files/GoldSeamRingYGVira.jpg?v=1742229531&width=1024 Vira Jewelry new in_stock 130.00 USD 196 50193564041525 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 3/16" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=50193564041525 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 110.00 USD 196 50219338858805 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 1/2" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=50219338858805 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 175.00 USD 196 50219344363829 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 1/4" / 14k White Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=50219344363829 https://infinitebody.com/cdn/shop/files/SeamRingGoldGroupVira.jpg?v=1742229966&width=1024 Vira Jewelry new in_stock 110.00 USD 196 50219348099381 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 5/8" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=50219348099381 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 130.00 USD 196 50219348132149 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 5/16" / 14k White Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=50219348132149 https://infinitebody.com/cdn/shop/files/GoldSeamRingWGVira.jpg?v=1742229532&width=1024 Vira Jewelry new in_stock 140.00 USD 196 50219354980661 Seam Ring in Gold from Vira Jewelry - 18g (1mm) / 13/32" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=50219354980661 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 140.00 USD 196 50219355078965 Seam Ring in Gold from Vira Jewelry - 16g (1.2mm) / 9/16" / 14k Rose Gold A continuous ring made from solid 14k gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/seam-ring-in-gold-from-vira-jewelry?variant=50219355078965 https://infinitebody.com/cdn/shop/files/GoldSeamRingRGVira.jpg?v=1742229978&width=1024 Vira Jewelry new in_stock 130.00 USD 196 52811092492597 Fruta Charm in Gold from Hialeah - 14g (1.6mm) / 14k Yellow Gold / Amethyst A 4mm by 6mm pear-cut genuine stone in a sleek bezel setting is suspended from a solid-gold chain, perfect for providing a bit of drama and dimension to a ring or press-fit end.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/fruta-charm-in-gold-from-hialeah?variant=52811092492597 https://infinitebody.com/cdn/shop/files/FrutaCharmYGAmethystHialeah.jpg?v=1777650678&width=1024 Hialeah new in_stock 105.00 USD 196 48082061787445 Fruta Charm in Gold from Hialeah - 14g (1.6mm) / 14k Yellow Gold / Citrine A 4mm by 6mm pear-cut genuine stone in a sleek bezel setting is suspended from a solid-gold chain, perfect for providing a bit of drama and dimension to a ring or press-fit end.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/fruta-charm-in-gold-from-hialeah?variant=48082061787445 https://infinitebody.com/cdn/shop/files/FrutaCharmYGCitrineHialeah_5907b6f7-6d98-450b-a3c8-e1e0d0c0824f.jpg?v=1777650678&width=1024 Hialeah new in_stock 105.00 USD 196 48082061820213 Fruta Charm in Gold from Hialeah - 14g (1.6mm) / 14k Yellow Gold / Labradorite A 4mm by 6mm pear-cut genuine stone in a sleek bezel setting is suspended from a solid-gold chain, perfect for providing a bit of drama and dimension to a ring or press-fit end.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/fruta-charm-in-gold-from-hialeah?variant=48082061820213 https://infinitebody.com/cdn/shop/files/FrutaCharmYGLabradoriteHialeah_377bda2e-4a38-4e43-a4be-3a3c059db489.jpg?v=1777650678&width=1024 Hialeah new in_stock 105.00 USD 196 52811092459829 Fruta Charm in Gold from Hialeah - 14g (1.6mm) / 14k Yellow Gold / Smoky Quartz A 4mm by 6mm pear-cut genuine stone in a sleek bezel setting is suspended from a solid-gold chain, perfect for providing a bit of drama and dimension to a ring or press-fit end.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/fruta-charm-in-gold-from-hialeah?variant=52811092459829 https://infinitebody.com/cdn/shop/files/FrutaCharmYGSmokyQuartzHialeah.jpg?v=1777650678&width=1024 Hialeah new in_stock 105.00 USD 196 52900940120373 Mami Chain in Gold from Hialeah - 14g (1.6mm) / 35mm / 14k Yellow Gold A diamond-cut figaro chain with a matching charm accent on one end holding a high-polished 6mm gold bar, for a little extra glamour.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/mami-chain-in-gold-from-hialeah?variant=52900940120373 https://infinitebody.com/cdn/shop/files/MamiChainYGHialeah.jpg?v=1712871501&width=1024 Hialeah new in_stock 100.00 USD 196 52900940251445 Mami Chain in Gold from Hialeah - 14g (1.6mm) / 40mm / 14k Yellow Gold A diamond-cut figaro chain with a matching charm accent on one end holding a high-polished 6mm gold bar, for a little extra glamour.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/mami-chain-in-gold-from-hialeah?variant=52900940251445 https://infinitebody.com/cdn/shop/files/MamiChainYGHialeah.jpg?v=1712871501&width=1024 Hialeah new in_stock 105.00 USD 196 47967270502709 Pyra Charm in Gold from Tether Jewelry - 16g (1.2mm) / 14k Rose Gold A pretty and punk solid-gold spike suspended from a fixed jump ring. Measures approximately 7mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/pyra-charm-in-gold-from-tether-jewelry?variant=47967270502709 https://infinitebody.com/cdn/shop/files/PyraCharmRGTether.jpg?v=1713285423&width=1024 Tether Jewelry new in_stock 120.00 USD 196 47904830062901 M&M Threaded End in Titanium from Anatometal - 10g (2.5mm) / 3/8" An implant-grade titanium (ASTM F136 6Al-4V ELI) ovoid threaded end designed for comfort and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/m-m-threaded-end-in-titanium-from-anatometal?variant=47904830062901 https://infinitebody.com/cdn/shop/files/M_MThreadedEndSSAnatometal_2a2b6766-5c00-4250-be6b-20bc01d52873.jpg?v=1705613991&width=1024 Anatometal new in_stock 48.00 USD 196 47549360144693 Clever Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / White Sapphire A solid-gold disk totes an opulent chain link charm with 1mm and 2mm genuine gemstone accents. Measures approximately 3mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/clever-press-fit-end-in-gold-from-pupil-hall?variant=47549360144693 https://infinitebody.com/cdn/shop/files/CleverPFEYGDiamond1PupilHall_4f721cac-ac6c-4057-aad6-5e64dbfe85fd.jpg?v=1741117772&width=1024 Pupil Hall new in_stock 216.00 USD 196 47548227977525 How Dare You Oval Press-fit End in Gold from Pupil Hall - 14k White Gold / Citrine A solid-gold length of cable chain with a centered ring accent secures a marquise-cut, genuine stone within a sleek bezel setting. Measures approximately 4mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/how-dare-you-oval-press-fit-end-in-gold-from-pupil-hall?variant=47548227977525 https://infinitebody.com/cdn/shop/files/HowDareYouOvalPFEWGCitrinePupilHall.jpg?v=1723742525&width=1024 Pupil Hall new in_stock 286.00 USD 196 49907761283381 How Dare You Oval Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Tanzanite A solid-gold length of cable chain with a centered ring accent secures a marquise-cut, genuine stone within a sleek bezel setting. Measures approximately 4mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/how-dare-you-oval-press-fit-end-in-gold-from-pupil-hall?variant=49907761283381 https://infinitebody.com/cdn/shop/files/HowDareYouPFEYGTanzanitePupilHall.jpg?v=1765567655&width=1024 Pupil Hall new in_stock 286.00 USD 196 47534444773685 Bitty Polka Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold / Black Enamel A solid gold circle with a bright enamel center affixed to a jump ring. Flip the charm around for an understated gold accent without the color. Measures approximately 5mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/bitty-polka-charm-in-gold-from-pupil-hall?variant=47534444773685 https://infinitebody.com/cdn/shop/files/BittyPolkaCharmWGBlackEnamelPupilHall.jpg?v=1701519728&width=1024 Pupil Hall new in_stock 102.00 USD 196 47534444806453 Bitty Polka Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k White Gold / Robin Blue Enamel A solid gold circle with a bright enamel center affixed to a jump ring. Flip the charm around for an understated gold accent without the color. Measures approximately 5mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/bitty-polka-charm-in-gold-from-pupil-hall?variant=47534444806453 https://infinitebody.com/cdn/shop/files/BittyPolkaCharmWGRobinEggBlueEnamelPupilHall.jpg?v=1701519728&width=1024 Pupil Hall new in_stock 102.00 USD 196 47534444708149 Bitty Polka Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold / Hot Pink Enamel A solid gold circle with a bright enamel center affixed to a jump ring. Flip the charm around for an understated gold accent without the color. Measures approximately 5mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/bitty-polka-charm-in-gold-from-pupil-hall?variant=47534444708149 https://infinitebody.com/cdn/shop/files/BittyPolkaCharmYGHotPinkEnamelPupilHall.jpg?v=1701519728&width=1024 Pupil Hall new in_stock 102.00 USD 196 47534444740917 Bitty Polka Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k Yellow Gold / Robin Blue Enamel A solid gold circle with a bright enamel center affixed to a jump ring. Flip the charm around for an understated gold accent without the color. Measures approximately 5mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/bitty-polka-charm-in-gold-from-pupil-hall?variant=47534444740917 https://infinitebody.com/cdn/shop/files/BittyPolkaCharmYGRobinEggBlueEnamelPupilHall.jpg?v=1701519728&width=1024 Pupil Hall new in_stock 102.00 USD 196 47531908464949 Strange Magic Charm in Gold from Pupil Hall - 16g (1.2mm) / 14k Rose Gold Artfully disjointed segments of a candlestick in solid gold hang suspended from a slender wisp of cable chain. Measures approximately 35mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/strange-magic-charm-in-gold-from-pupil-hall?variant=47531908464949 https://infinitebody.com/cdn/shop/files/StrangeMagicCharmRGPupilHall.jpg?v=1701469250&width=1024 Pupil Hall new in_stock 320.00 USD 196 47531790336309 Clever Lynx Chain in Gold from Pupil Hall - 18g (1mm) / 40mm / 14k Rose Gold with Diamonds Petite 1mm prong-set genuine stones speckle the surface of this woven solid-gold chain that is sure to impress from any angle. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/clever-lynx-chain-in-gold-from-pupil-hall?variant=47531790336309 https://infinitebody.com/cdn/shop/files/CleverLynxChainRGPupilHall.jpg?v=1701467368&width=1024 Pupil Hall new in_stock 436.00 USD 196 47531677057333 Bada Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 19mm / 14k Yellow Gold A trio of solid-gold chains in varied styles create a dramatic arc of texture and shine. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/bada-lynx-chain-in-gold-from-pupil-hall?variant=47531677057333 https://infinitebody.com/cdn/shop/files/BadaLynxChainYGPupilHall.jpg?v=1701465524&width=1024 Pupil Hall new in_stock 252.00 USD 196 47531677090101 Bada Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 25mm / 14k Yellow Gold A trio of solid-gold chains in varied styles create a dramatic arc of texture and shine. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/bada-lynx-chain-in-gold-from-pupil-hall?variant=47531677090101 https://infinitebody.com/cdn/shop/files/BadaLynxChainYGPupilHall.jpg?v=1701465524&width=1024 Pupil Hall new in_stock 282.00 USD 196 47531677155637 Bada Lynx Chain in Gold from Pupil Hall - 16g (1.2mm) / 40mm / 14k Yellow Gold A trio of solid-gold chains in varied styles create a dramatic arc of texture and shine. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/bada-lynx-chain-in-gold-from-pupil-hall?variant=47531677155637 https://infinitebody.com/cdn/shop/files/BadaLynxChainYGPupilHall.jpg?v=1701465524&width=1024 Pupil Hall new in_stock 332.00 USD 196 47364354015541 Fringe Charm in Gold from Tether Jewelry - 14g (1.6mm) / 14k Rose Gold Three matching lengths of 1mm cable chain hang suspended from a solid-gold jump ring, perfect for adding a dramatic flair to any existing piercing. Measures approximately 14mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/fringe-charm-in-gold-from-tether-jewelry?variant=47364354015541 https://infinitebody.com/cdn/shop/files/FringeCharmRGTether.jpg?v=1699393961&width=1024 Tether Jewelry new in_stock 100.00 USD 196 47364101833013 Blaze 7 Seam Ring in Gold from BVLA - 16g 5/16" / 14k White Gold / Rainbow Moonstone Seven 1.5mm prong-set genuine stones sit atop a sleek solid-gold ring in an eye-catching, elegant arc.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/blaze-7-seam-ring-in-gold-from-bvla?variant=47364101833013 https://infinitebody.com/cdn/shop/files/Blaze7SRWGRainbowMoonstoneBVLA.jpg?v=1699387520&width=1024 BVLA new in_stock 440.00 USD 196 47364101865781 Blaze 7 Seam Ring in Gold from BVLA - 16g 11/32" / 14k White Gold / Rainbow Moonstone Seven 1.5mm prong-set genuine stones sit atop a sleek solid-gold ring in an eye-catching, elegant arc.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/blaze-7-seam-ring-in-gold-from-bvla?variant=47364101865781 https://infinitebody.com/cdn/shop/files/Blaze7SRWGRainbowMoonstoneBVLA.jpg?v=1699387520&width=1024 BVLA new in_stock 445.00 USD 196 47364101964085 Blaze 7 Seam Ring in Gold from BVLA - 16g 11/32" / 14k White Gold / Swiss Blue Topaz Seven 1.5mm prong-set genuine stones sit atop a sleek solid-gold ring in an eye-catching, elegant arc.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/blaze-7-seam-ring-in-gold-from-bvla?variant=47364101964085 https://infinitebody.com/cdn/shop/files/Blaze7SRWGSwissBlueTopazBVLA.jpg?v=1699387520&width=1024 BVLA new in_stock 500.00 USD 196 47364101898549 Blaze 7 Seam Ring in Gold from BVLA - 16g 3/8" / 14k White Gold / Rainbow Moonstone Seven 1.5mm prong-set genuine stones sit atop a sleek solid-gold ring in an eye-catching, elegant arc.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/blaze-7-seam-ring-in-gold-from-bvla?variant=47364101898549 https://infinitebody.com/cdn/shop/files/Blaze7SRWGRainbowMoonstoneBVLA.jpg?v=1699387520&width=1024 BVLA new in_stock 450.00 USD 196 47363434905909 Faraway Seam Ring in Gold from BVLA - 16g 11/32" / 14k Yellow Gold / Tanzanite Cabochon & Garnet A trio of 1.5mm and 2mm gemstones bookended by subtle faux wire wrap detailing. A strikingly detailed design in solid 14k gold.When selecting stones from the dropdown the central stone is listed first and accent stones are listed second.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/faraway-seam-ring-in-gold-from-bvla?variant=47363434905909 https://infinitebody.com/cdn/shop/files/FarawaySRYGTanzaniteGarnetBVLA.jpg?v=1699379319&width=1024 BVLA new in_stock 435.00 USD 196 47363435069749 Faraway Seam Ring in Gold from BVLA - 16g 3/8" / 14k White Gold / Oregon Sunstone & Anastasia Topaz A trio of 1.5mm and 2mm gemstones bookended by subtle faux wire wrap detailing. A strikingly detailed design in solid 14k gold.When selecting stones from the dropdown the central stone is listed first and accent stones are listed second.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/faraway-seam-ring-in-gold-from-bvla?variant=47363435069749 https://infinitebody.com/cdn/shop/files/FarawaySRWGOregonSunstoneAnastasiaTopazBVLA.jpg?v=1699379319&width=1024 BVLA new in_stock 490.00 USD 196 47201475690805 Illuminati Press-fit End in Gold from Modern Mood - Black Rhodium / Moonstone A single 1mm genuine stone cabochon held atop a solid-gold triangle by three dainty prongs. Measures approximately 2mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/illuminati-press-fit-end-in-gold-from-modern-mood?variant=47201475690805 https://infinitebody.com/cdn/shop/files/IlluminatiCabochonPFEBRMoonstoneModernMood.jpg?v=1697744485&width=1024 Modern Mood new in_stock 140.00 USD 196 46994742804789 Apex Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold A solid-gold frame of textured details surrounding a raised gold pyramid. Measures approximately 4mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/apex-press-fit-end-in-gold-from-tether-jewelry?variant=46994742804789 https://infinitebody.com/cdn/shop/files/ApexPFEYGTether_58b9fe3b-a2dc-4233-a9bc-c85a0a033191.jpg?v=1755711029&width=1024 Tether Jewelry new in_stock 125.00 USD 196 46993358356789 Luka Charm in Gold from Tether Jewelry - 14g (1.6mm) / 14k Yellow Gold / Citrine A faceted 3mm genuine stone encircled in a delicately interrupted geometric bezel setting of solid gold. Measures approximately 6mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/luka-charm-in-gold-from-tether-jewelry?variant=46993358356789 https://infinitebody.com/cdn/shop/files/LukaCharmYGCitrineTether.jpg?v=1695925322&width=1024 Tether Jewelry new in_stock 140.00 USD 196 50738421858613 Sun Ray Press-fit End in Gold from BVLA - 14k Rose Gold / Chrysoprase / Large A striking genuine stone sits in a bezel setting amid a sunburst of solid-gold spokes in varying lengths. Small holds a 1.5mm stone and measures approximately 4mm across.Large holds a 2mm stone and measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sun-ray-press-fit-end-in-gold-from-bvla?variant=50738421858613 https://infinitebody.com/cdn/shop/files/SunRayPFERGChrysopraseLargeBVLA.jpg?v=1742483044&width=1024 BVLA new in_stock 245.00 USD 196 50920505082165 Sun Ray Press-fit End in Gold from BVLA - 14k Rose Gold / Green Tourmaline Cabochon / Small A striking genuine stone sits in a bezel setting amid a sunburst of solid-gold spokes in varying lengths. Small holds a 1.5mm stone and measures approximately 4mm across.Large holds a 2mm stone and measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sun-ray-press-fit-end-in-gold-from-bvla?variant=50920505082165 https://infinitebody.com/cdn/shop/files/SunRayPFERGPadparadschaSapphieSmallBVLA.jpg?v=1747326022&width=1024 BVLA new in_stock 205.00 USD 196 46976455049525 Sun Ray Press-fit End in Gold from BVLA - 14k Rose Gold / Light Amethyst / Large A striking genuine stone sits in a bezel setting amid a sunburst of solid-gold spokes in varying lengths. Small holds a 1.5mm stone and measures approximately 4mm across.Large holds a 2mm stone and measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sun-ray-press-fit-end-in-gold-from-bvla?variant=46976455049525 https://infinitebody.com/cdn/shop/files/SunRayPFERGLightAmethystBVLA.jpg?v=1742483044&width=1024 BVLA new in_stock 245.00 USD 196 46976489128245 Sun Ray Press-fit End in Gold from BVLA - 14k Rose Gold / Light Amethyst / Small A striking genuine stone sits in a bezel setting amid a sunburst of solid-gold spokes in varying lengths. Small holds a 1.5mm stone and measures approximately 4mm across.Large holds a 2mm stone and measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sun-ray-press-fit-end-in-gold-from-bvla?variant=46976489128245 https://infinitebody.com/cdn/shop/files/SunRayPFERGLightAmethystBVLA.jpg?v=1742483044&width=1024 BVLA new in_stock 205.00 USD 196 50738421891381 Sun Ray Press-fit End in Gold from BVLA - 14k Rose Gold / Padparadscha Sapphire / Small A striking genuine stone sits in a bezel setting amid a sunburst of solid-gold spokes in varying lengths. Small holds a 1.5mm stone and measures approximately 4mm across.Large holds a 2mm stone and measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sun-ray-press-fit-end-in-gold-from-bvla?variant=50738421891381 https://infinitebody.com/cdn/shop/files/SunRayPFERGPadparadschaSapphieSmallBVLA.jpg?v=1747326022&width=1024 BVLA new in_stock 205.00 USD 196 46976488767797 Sun Ray Press-fit End in Gold from BVLA - 14k White Gold / Aquamarine / Small A striking genuine stone sits in a bezel setting amid a sunburst of solid-gold spokes in varying lengths. Small holds a 1.5mm stone and measures approximately 4mm across.Large holds a 2mm stone and measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sun-ray-press-fit-end-in-gold-from-bvla?variant=46976488767797 https://infinitebody.com/cdn/shop/files/SunRayPFEWGAquamarineBVLA.jpg?v=1742483044&width=1024 BVLA new in_stock 205.00 USD 196 46976488866101 Sun Ray Press-fit End in Gold from BVLA - 14k Yellow Gold / Garnet / Large A striking genuine stone sits in a bezel setting amid a sunburst of solid-gold spokes in varying lengths. Small holds a 1.5mm stone and measures approximately 4mm across.Large holds a 2mm stone and measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sun-ray-press-fit-end-in-gold-from-bvla?variant=46976488866101 https://infinitebody.com/cdn/shop/files/SunRayPFEYGGarnetBVLA.jpg?v=1742483044&width=1024 BVLA new in_stock 245.00 USD 196 46976488538421 Sun Ray Press-fit End in Gold from BVLA - 14k Yellow Gold / Garnet / Small A striking genuine stone sits in a bezel setting amid a sunburst of solid-gold spokes in varying lengths. Small holds a 1.5mm stone and measures approximately 4mm across.Large holds a 2mm stone and measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/sun-ray-press-fit-end-in-gold-from-bvla?variant=46976488538421 https://infinitebody.com/cdn/shop/files/SunRayPFEYGGarnetBVLA.jpg?v=1742483044&width=1024 BVLA new in_stock 205.00 USD 196 46975609405749 Timka Press-fit End in Gold from BVLA - 14k White Gold / Rhodolite A dazzling trillion-cut genuine stone adorned with a bead cluster crown, adding a charismatic twist to a timeless design. Measures approximately 3mm by 6mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/timka-press-fit-end-in-gold-from-bvla?variant=46975609405749 https://infinitebody.com/cdn/shop/files/TimkaPFEGroupBVLA.jpg?v=1695832020&width=1024 BVLA new in_stock 255.00 USD 196 52487333839157 Cab Prong Press-fit End in Gold from BVLA - 14k Rose Gold / Rose Quartz / 3mm A single genuine stone cradled in an elegant and solid-gold double-clawed prong setting.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cab-prong-press-fit-end-in-gold-from-bvla?variant=52487333839157 https://infinitebody.com/cdn/shop/files/CabProngPFERGRoseQuartzBVLA_jpg.jpg?v=1774541911&width=1024 BVLA new in_stock 230.00 USD 196 46895747957045 Cab Prong Press-fit End in Gold from BVLA - 14k White Gold / Peridot / 2.5mm A single genuine stone cradled in an elegant and solid-gold double-clawed prong setting.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cab-prong-press-fit-end-in-gold-from-bvla?variant=46895747957045 https://infinitebody.com/cdn/shop/files/CabProngPFEWGPeridotBVLA.jpg?v=1774541911&width=1024 BVLA new in_stock 200.00 USD 196 46895748022581 Cab Prong Press-fit End in Gold from BVLA - 14k White Gold / Sandblasted Rhodolite / 2.5mm A single genuine stone cradled in an elegant and solid-gold double-clawed prong setting.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cab-prong-press-fit-end-in-gold-from-bvla?variant=46895748022581 https://infinitebody.com/cdn/shop/files/CabProngPFEWGSandblastedRhodoliteBVLA.jpg?v=1774541911&width=1024 BVLA new in_stock 200.00 USD 196 52487333609781 Cab Prong Press-fit End in Gold from BVLA - 14k White Gold / Smoky Quartz / 2.5mm A single genuine stone cradled in an elegant and solid-gold double-clawed prong setting.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cab-prong-press-fit-end-in-gold-from-bvla?variant=52487333609781 https://infinitebody.com/cdn/shop/files/CabProngPFEWGSmokyQuartzBVLA_jpg.jpg?v=1774541911&width=1024 BVLA new in_stock 200.00 USD 196 46895747924277 Cab Prong Press-fit End in Gold from BVLA - 14k Yellow Gold / Chrysoprase / 2.5mm A single genuine stone cradled in an elegant and solid-gold double-clawed prong setting.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cab-prong-press-fit-end-in-gold-from-bvla?variant=46895747924277 https://infinitebody.com/cdn/shop/files/CabProngPFEYGChrysopraseBVLA.jpg?v=1774541911&width=1024 BVLA new in_stock 200.00 USD 196 46895747891509 Cab Prong Press-fit End in Gold from BVLA - 14k Yellow Gold / Garnet / 2.5mm A single genuine stone cradled in an elegant and solid-gold double-clawed prong setting.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cab-prong-press-fit-end-in-gold-from-bvla?variant=46895747891509 https://infinitebody.com/cdn/shop/files/CabProngPFEYGGarnetBVLA.jpg?v=1774541911&width=1024 BVLA new in_stock 200.00 USD 196 46895747825973 Cab Prong Press-fit End in Gold from BVLA - 14k Yellow Gold / Sandblasted Swiss Blue Topaz / 2.5mm A single genuine stone cradled in an elegant and solid-gold double-clawed prong setting.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/cab-prong-press-fit-end-in-gold-from-bvla?variant=46895747825973 https://infinitebody.com/cdn/shop/files/CabProngPFEYGSandblastedSwissBlueTopazBVLA.jpg?v=1774541911&width=1024 BVLA new in_stock 200.00 USD 196 46882999894325 Hammered Heart Press-fit End in Gold from Junipurr Jewelry - 14k Rose Gold / 3mm A classic solid-gold heart design juxtaposed with a stippled, pitted surface texture.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-heart-press-fit-end-in-gold-from-junipurr-jewelry?variant=46882999894325 https://infinitebody.com/cdn/shop/files/HammeredHeartPFEGroupJunipurr.jpg?v=1695336540&width=1024 Junipurr Jewelry new in_stock 90.00 USD 196 46882999927093 Hammered Heart Press-fit End in Gold from Junipurr Jewelry - 14k White Gold / 3mm A classic solid-gold heart design juxtaposed with a stippled, pitted surface texture.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-heart-press-fit-end-in-gold-from-junipurr-jewelry?variant=46882999927093 https://infinitebody.com/cdn/shop/files/HammeredHeartPFEGroupJunipurr.jpg?v=1695336540&width=1024 Junipurr Jewelry new in_stock 90.00 USD 196 46882999959861 Hammered Heart Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / 3mm A classic solid-gold heart design juxtaposed with a stippled, pitted surface texture.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hammered-heart-press-fit-end-in-gold-from-junipurr-jewelry?variant=46882999959861 https://infinitebody.com/cdn/shop/files/HammeredHeartPFEGroupJunipurr.jpg?v=1695336540&width=1024 Junipurr Jewelry new in_stock 90.00 USD 196 49932890112309 Titanium Curb Chain from Zadamer Jewelry - 16g (1.2mm) / 42mm A timeless curb chain made from implant-grade titanium hangs suspended between two jump rings. Perfect for adding a fun, dimensional element to one or more piercings.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/titanium-curb-chain-from-zadamer-jewelry?variant=49932890112309 https://infinitebody.com/cdn/shop/files/TitaniumCurbChainSizeDetailZadamer.jpg?v=1693431658&width=1024 Zadamer Jewelry new in_stock 25.00 USD 196 49932890210613 Titanium Curb Chain from Zadamer Jewelry - 16g (1.2mm) / 45mm A timeless curb chain made from implant-grade titanium hangs suspended between two jump rings. Perfect for adding a fun, dimensional element to one or more piercings.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/titanium-curb-chain-from-zadamer-jewelry?variant=49932890210613 https://infinitebody.com/cdn/shop/files/TitaniumCurbChainSizeDetailZadamer.jpg?v=1693431658&width=1024 Zadamer Jewelry new in_stock 25.00 USD 196 46258866487605 Straight Threaded Barbell Shaft in Titanium from 6g to 00g from Industrial Strength - 6g (4mm) / 3/8" A straight, internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 16g to 8g, shop here.These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft. https://infinitebody.com/products/straight-threaded-barbell-shaft-in-titanium-from-industrial-strength-from-6g-to-00g?variant=46258866487605 https://infinitebody.com/cdn/shop/files/StraightThreadedBarbellTT-postonly-IndustrialStrength_004de744-435a-4faa-a2ca-e8e86adc6707.jpg?v=1692138590&width=1024 Industrial Strength new in_stock 34.00 USD 196 46258866651445 Straight Threaded Barbell Shaft in Titanium from 6g to 00g from Industrial Strength - 4g (5mm) / 5/16" A straight, internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 16g to 8g, shop here.These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft. https://infinitebody.com/products/straight-threaded-barbell-shaft-in-titanium-from-industrial-strength-from-6g-to-00g?variant=46258866651445 https://infinitebody.com/cdn/shop/files/StraightThreadedBarbellTT-postonly-IndustrialStrength_004de744-435a-4faa-a2ca-e8e86adc6707.jpg?v=1692138590&width=1024 Industrial Strength new in_stock 34.00 USD 196 46258866716981 Straight Threaded Barbell Shaft in Titanium from 6g to 00g from Industrial Strength - 4g (5mm) / 7/16" A straight, internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 16g to 8g, shop here.These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft. https://infinitebody.com/products/straight-threaded-barbell-shaft-in-titanium-from-industrial-strength-from-6g-to-00g?variant=46258866716981 https://infinitebody.com/cdn/shop/files/StraightThreadedBarbellTT-postonly-IndustrialStrength_004de744-435a-4faa-a2ca-e8e86adc6707.jpg?v=1692138590&width=1024 Industrial Strength new in_stock 34.00 USD 196 46258867011893 Straight Threaded Barbell Shaft in Titanium from 6g to 00g from Industrial Strength - 4g (5mm) / 5/8" A straight, internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 16g to 8g, shop here.These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft. https://infinitebody.com/products/straight-threaded-barbell-shaft-in-titanium-from-industrial-strength-from-6g-to-00g?variant=46258867011893 https://infinitebody.com/cdn/shop/files/StraightThreadedBarbellTT-postonly-IndustrialStrength_004de744-435a-4faa-a2ca-e8e86adc6707.jpg?v=1692138590&width=1024 Industrial Strength new in_stock 34.00 USD 196 46258867044661 Straight Threaded Barbell Shaft in Titanium from 6g to 00g from Industrial Strength - 4g (5mm) / 11/16" A straight, internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 16g to 8g, shop here.These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft. https://infinitebody.com/products/straight-threaded-barbell-shaft-in-titanium-from-industrial-strength-from-6g-to-00g?variant=46258867044661 https://infinitebody.com/cdn/shop/files/StraightThreadedBarbellTT-postonly-IndustrialStrength_004de744-435a-4faa-a2ca-e8e86adc6707.jpg?v=1692138590&width=1024 Industrial Strength new in_stock 34.00 USD 196 45584438067509 Mini Swan Threader in Gold from Quetzalli - 18g (1mm) / Short / 14k Yellow Gold with Teal Tourmaline A raw rectangular genuine stone held in a solid-gold bezel-setting and suspended from a length of box chain from a solid-gold 18g hook. Stone size, shape, and color may vary.Short measures approximately 30mm long.Long measures approximately 40mm long. https://infinitebody.com/products/mini-swan-threader-in-gold-from-quetzalli?variant=45584438067509 https://infinitebody.com/cdn/shop/files/MiniSwanThreaderYGTealTourmalineQuetzalli.jpg?v=1689359047&width=1024 Quetzalli new in_stock 320.00 USD 196 45569945108789 Flat Back Cabochon Gem Press-fit End in Titanium from Industrial Strength - Amethyst / 2mm A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/flat-back-cabochon-gem-press-fit-end-in-titanium-from-industrial-strength?variant=45569945108789 https://infinitebody.com/cdn/shop/files/FlatBackCabPFEAmethystIndustrialStrength.jpg?v=1689284944&width=1024 Industrial Strength new in_stock 22.00 USD 196 45569945207093 Flat Back Cabochon Gem Press-fit End in Titanium from Industrial Strength - Amethyst / 3mm A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/flat-back-cabochon-gem-press-fit-end-in-titanium-from-industrial-strength?variant=45569945207093 https://infinitebody.com/cdn/shop/files/FlatBackCabPFEGroupIndustrialStrength.jpg?v=1689284944&width=1024 Industrial Strength new in_stock 22.00 USD 196 45569945370933 Flat Back Cabochon Gem Press-fit End in Titanium from Industrial Strength - Baltic Amber / 3mm A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/flat-back-cabochon-gem-press-fit-end-in-titanium-from-industrial-strength?variant=45569945370933 https://infinitebody.com/cdn/shop/files/FlatBackCabPFEGroupIndustrialStrength.jpg?v=1689284944&width=1024 Industrial Strength new in_stock 22.00 USD 196 45569945338165 Flat Back Cabochon Gem Press-fit End in Titanium from Industrial Strength - Blue Agate / 3mm A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/flat-back-cabochon-gem-press-fit-end-in-titanium-from-industrial-strength?variant=45569945338165 https://infinitebody.com/cdn/shop/files/FlatBackCabPFEGroupIndustrialStrength.jpg?v=1689284944&width=1024 Industrial Strength new in_stock 22.00 USD 196 45569945239861 Flat Back Cabochon Gem Press-fit End in Titanium from Industrial Strength - Garnet / 3mm A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/flat-back-cabochon-gem-press-fit-end-in-titanium-from-industrial-strength?variant=45569945239861 https://infinitebody.com/cdn/shop/files/FlatBackCabPFEGarnetIndustrialStrength.jpg?v=1695821775&width=1024 Industrial Strength new in_stock 22.00 USD 196 45569945403701 Flat Back Cabochon Gem Press-fit End in Titanium from Industrial Strength - Natural Paua Shell / 3mm A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/flat-back-cabochon-gem-press-fit-end-in-titanium-from-industrial-strength?variant=45569945403701 https://infinitebody.com/cdn/shop/files/FlatBackCabPFEGroupIndustrialStrength.jpg?v=1689284944&width=1024 Industrial Strength new in_stock 22.00 USD 196 45569737654581 Collared Cuff from Maya Jewelry - Yellow-gold-plated Brass A collar-inspired design consisting of three lengths of chunky box chain dangling from a lightly-ridged non-piercing cuff in gold-plated brass. Great for pierced or unpierced ears.Each piece measures just over 1 3/4” in total length. Sold as singles. For a pair, select a quantity of 2. https://infinitebody.com/products/collared-cuff-from-maya-jewelry?variant=45569737654581 https://infinitebody.com/cdn/shop/files/CollaredCuffYGMaya.jpg?v=1689282364&width=1024 Maya Jewelry new in_stock 120.00 USD 196 45569687257397 Lovelocked Press-fit End in Gold from Maya Jewelry - 14k White Gold A teasingly playful design consisting of a miniature solid-gold lock with its key dangling freely below from a short length of chain. Measures approximately 3mm by 12mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/lovelocked-press-fit-end-in-gold-from-maya-jewelry?variant=45569687257397 https://infinitebody.com/cdn/shop/files/LovelockedPFEWGMaya.jpg?v=1689281990&width=1024 Maya Jewelry new in_stock 210.00 USD 196 52294025904437 Hera Seam Ring in Gold from Tawapa - 18g 5/16" / 14k Yellow Gold / Green CZ A quietly grand solid-gold ring lined with nine 1mm outward-facing stones in open prong-settings, creating a dynamic look both head-on and from the side. Perfect for placements such as healed nostril and helix piercings.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/hera-seam-ring-in-gold-from-tawapa?variant=52294025904437 https://infinitebody.com/cdn/shop/files/HeraSeamRingYGGreenCZ.jpg?v=1759938380&width=1024 Tawapa new in_stock 410.00 USD 196 45556667515189 Hera Seam Ring in Gold from Tawapa - 18g 3/8" / 14k White Gold / Clear CZ A quietly grand solid-gold ring lined with nine 1mm outward-facing stones in open prong-settings, creating a dynamic look both head-on and from the side. Perfect for placements such as healed nostril and helix piercings.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/hera-seam-ring-in-gold-from-tawapa?variant=45556667515189 https://infinitebody.com/cdn/shop/files/HeraSeamRingWGCZTawapa_b1e94189-6c7d-442a-a1d9-43f220a79647.jpg?v=1689279131&width=1024 Tawapa new in_stock 410.00 USD 196 45556667547957 Hera Seam Ring in Gold from Tawapa - 18g 3/8" / 14k White Gold / Purple CZ A quietly grand solid-gold ring lined with nine 1mm outward-facing stones in open prong-settings, creating a dynamic look both head-on and from the side. Perfect for placements such as healed nostril and helix piercings.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/hera-seam-ring-in-gold-from-tawapa?variant=45556667547957 https://infinitebody.com/cdn/shop/files/HeraSeamRingWGPurpleCZTawapa_a3c33a0c-b777-4f36-aa09-187ee1731100.jpg?v=1689279115&width=1024 Tawapa new in_stock 410.00 USD 196 46626374123829 Round Wheat Chain in Gold from Jewelry This Way - 16g / 16mm / 14k Yellow Gold A 0.8mm chain distinguished by tightly interwoven links is a sophisticated display of structure and shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/round-wheat-chain-in-gold-from-jewelry-this-way?variant=46626374123829 https://infinitebody.com/cdn/shop/files/RoundWheatChainYGGroupJewelryThisWay_e398ff5f-8cd2-4e44-a2eb-6081ea966ef2.jpg?v=1689263061&width=1024 Jewelry This Way new in_stock 160.00 USD 196 45480034042165 Round Wheat Chain in Gold from Jewelry This Way - 16g / 20mm / 14k Yellow Gold A 0.8mm chain distinguished by tightly interwoven links is a sophisticated display of structure and shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/round-wheat-chain-in-gold-from-jewelry-this-way?variant=45480034042165 https://infinitebody.com/cdn/shop/files/RoundWheatChainYGGroupJewelryThisWay_e398ff5f-8cd2-4e44-a2eb-6081ea966ef2.jpg?v=1689263061&width=1024 Jewelry This Way new in_stock 160.00 USD 196 46626377695541 Round Wheat Chain in Gold from Jewelry This Way - 16g / 24mm / 14k Yellow Gold A 0.8mm chain distinguished by tightly interwoven links is a sophisticated display of structure and shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/round-wheat-chain-in-gold-from-jewelry-this-way?variant=46626377695541 https://infinitebody.com/cdn/shop/files/RoundWheatChainYGJewelryThisWay_fc2abd45-1679-4d30-9a40-ac26e69770c7.jpg?v=1689263062&width=1024 Jewelry This Way new in_stock 160.00 USD 196 46626375532853 Round Wheat Chain in Gold from Jewelry This Way - 16g / 34mm / 14k Yellow Gold A 0.8mm chain distinguished by tightly interwoven links is a sophisticated display of structure and shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/round-wheat-chain-in-gold-from-jewelry-this-way?variant=46626375532853 https://infinitebody.com/cdn/shop/files/RoundWheatChainYGGroupJewelryThisWay_e398ff5f-8cd2-4e44-a2eb-6081ea966ef2.jpg?v=1689263061&width=1024 Jewelry This Way new in_stock 160.00 USD 196 46626377040181 Round Wheat Chain in Gold from Jewelry This Way - 16g / 40mm / 14k Yellow Gold A 0.8mm chain distinguished by tightly interwoven links is a sophisticated display of structure and shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/round-wheat-chain-in-gold-from-jewelry-this-way?variant=46626377040181 https://infinitebody.com/cdn/shop/files/RoundWheatChainYGJewelryThisWay_fc2abd45-1679-4d30-9a40-ac26e69770c7.jpg?v=1689263062&width=1024 Jewelry This Way new in_stock 160.00 USD 196 46626504507701 Round Wheat Chain in Gold from Jewelry This Way - 16g / 45mm / 14k Yellow Gold A 0.8mm chain distinguished by tightly interwoven links is a sophisticated display of structure and shine.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/round-wheat-chain-in-gold-from-jewelry-this-way?variant=46626504507701 https://infinitebody.com/cdn/shop/files/RoundWheatChainYGGroupJewelryThisWay_e398ff5f-8cd2-4e44-a2eb-6081ea966ef2.jpg?v=1689263061&width=1024 Jewelry This Way new in_stock 160.00 USD 196 52368256139573 Grizant Cabochon Press-fit End in Gold from Auris Jewellery - 14k White Gold / Garnet / 3.5mm A genuine stone cabochon set in a ring of miniature gold spokes. Size refers to the overall measurement of the end.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/grizant-cabochon-press-fit-end-in-gold-from-auris-jewellery?variant=52368256139573 https://infinitebody.com/cdn/shop/files/GrizantCabPFEWGGarnetGroupAuris.jpg?v=1772035001&width=1024 Auris Jewellery new in_stock 245.00 USD 196 45270388539701 O-Ring Collar Spiked Clicker in Titanium from Zadamer Jewelry - 16g (1.2mm) / 5/16" A hinged ring featuring layered elements of thin wire bands and symmetrical spikes in graduating sizes terminating in a free-moving titanium o-ring hanging at its apex.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/o-ring-collar-spiked-clicker-in-titanium-from-zadamer-jewelry?variant=45270388539701 https://infinitebody.com/cdn/shop/files/SpikeCollarClickerGroupZadamer.jpg?v=1686260429&width=1024 Zadamer Jewelry new in_stock 185.00 USD 196 45270388572469 O-Ring Collar Spiked Clicker in Titanium from Zadamer Jewelry - 16g (1.2mm) / 3/8" A hinged ring featuring layered elements of thin wire bands and symmetrical spikes in graduating sizes terminating in a free-moving titanium o-ring hanging at its apex.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/o-ring-collar-spiked-clicker-in-titanium-from-zadamer-jewelry?variant=45270388572469 https://infinitebody.com/cdn/shop/files/SpikeCollarClickerGroupZadamer.jpg?v=1686260429&width=1024 Zadamer Jewelry new in_stock 185.00 USD 196 45270023405877 Oaktier Seam Ring in Gold from BVLA - 18g (1mm) / 3/8" / 14k Rose Gold A row of ten modest solid gold beads embellish a high-polished ring.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/oaktier-seam-ring-in-gold-from-bvla?variant=45270023405877 https://infinitebody.com/cdn/shop/files/OaktierSRRGBVLA.jpg?v=1686256281&width=1024 BVLA new in_stock 290.00 USD 196 45270023373109 Oaktier Seam Ring in Gold from BVLA - 18g (1mm) / 3/8" / 14k White Gold A row of ten modest solid gold beads embellish a high-polished ring.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/oaktier-seam-ring-in-gold-from-bvla?variant=45270023373109 https://infinitebody.com/cdn/shop/files/OaktierSRWGBVLA.jpg?v=1686256282&width=1024 BVLA new in_stock 290.00 USD 196 45269746483509 Sonder Hinged Ring in Gold from Quetzalli - 16g (1.2mm) / 3/8" / 14k Yellow Gold Two arced bands of solid gold beads play with negative space and create the illusion of wearing two rings at once.The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. https://infinitebody.com/products/sonder-hinged-ring-in-gold-from-quetzalli?variant=45269746483509 https://infinitebody.com/cdn/shop/files/SonderClickerYGQuetzalli.jpg?v=1686254826&width=1024 Quetzalli new in_stock 330.00 USD 196 45003811455285 Hammered Beaded Seam Ring in Gold from Dusk Body Jewelry - 16g 3/8" / 14k Rose Gold / Single Row Concentric rings of solid gold beads dot a partially stippled seam ring, drawing the eye with texture and shine.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/hammered-beaded-seam-ring-in-gold-from-dusk-body-jewelry?variant=45003811455285 https://infinitebody.com/cdn/shop/files/HammeredBeadedSeamRingRG1RowDusk.jpg?v=1683057069&width=1024 Dusk Body Jewelry new in_stock 260.00 USD 196 45003811422517 Hammered Beaded Seam Ring in Gold from Dusk Body Jewelry - 16g 3/8" / 14k Rose Gold / Double Row Concentric rings of solid gold beads dot a partially stippled seam ring, drawing the eye with texture and shine.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/hammered-beaded-seam-ring-in-gold-from-dusk-body-jewelry?variant=45003811422517 https://infinitebody.com/cdn/shop/files/HammeredBeadedSeamRingRG2RowDusk.jpg?v=1683057068&width=1024 Dusk Body Jewelry new in_stock 310.00 USD 196 45003811520821 Hammered Beaded Seam Ring in Gold from Dusk Body Jewelry - 16g 7/16" / 14k Rose Gold / Single Row Concentric rings of solid gold beads dot a partially stippled seam ring, drawing the eye with texture and shine.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/hammered-beaded-seam-ring-in-gold-from-dusk-body-jewelry?variant=45003811520821 https://infinitebody.com/cdn/shop/files/HammeredBeadedSeamRingRG1RowDusk.jpg?v=1683057069&width=1024 Dusk Body Jewelry new in_stock 300.00 USD 196 45003798446389 Beaded Seam Ring in Gold from Dusk Body Jewelry - 18g 1/4" / 14k Rose Gold / Single Row A playful and polished design consisting of a high-polish solid-gold seam ring hugged by a row of matching beads. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/beaded-seam-ring-in-gold-from-dusk-body-jewelry?variant=45003798446389 https://infinitebody.com/cdn/shop/files/BeadedSeamRingRGDusk.jpg?v=1683056621&width=1024 Dusk Body Jewelry new in_stock 130.00 USD 196 45003798479157 Beaded Seam Ring in Gold from Dusk Body Jewelry - 18g 5/16" / 14k Rose Gold / Single Row A playful and polished design consisting of a high-polish solid-gold seam ring hugged by a row of matching beads. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/beaded-seam-ring-in-gold-from-dusk-body-jewelry?variant=45003798479157 https://infinitebody.com/cdn/shop/files/BeadedSeamRingRGDusk.jpg?v=1683056621&width=1024 Dusk Body Jewelry new in_stock 160.00 USD 196 45003798511925 Beaded Seam Ring in Gold from Dusk Body Jewelry - 18g 3/8" / 14k Rose Gold / Single Row A playful and polished design consisting of a high-polish solid-gold seam ring hugged by a row of matching beads. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/beaded-seam-ring-in-gold-from-dusk-body-jewelry?variant=45003798511925 https://infinitebody.com/cdn/shop/files/BeadedSeamRingRGDusk.jpg?v=1683056621&width=1024 Dusk Body Jewelry new in_stock 190.00 USD 196 45003735793973 Hammered Fan Seam Ring in Gold from Dusk Body Jewelry - 16g (1.2mm) / 3/8" / 14k Rose Gold A flat band of solid gold textured with stippled divots hugs a high-polish solid-gold seam ring to create an added flare of texture and style.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/hammered-fan-seam-ring-in-gold-from-dusk-body-jewelry?variant=45003735793973 https://infinitebody.com/cdn/shop/files/HammeredFanSeamRGDusk.jpg?v=1683057074&width=1024 Dusk Body Jewelry new in_stock 310.00 USD 196 45003735859509 Hammered Fan Seam Ring in Gold from Dusk Body Jewelry - 16g (1.2mm) / 7/16" / 14k Rose Gold A flat band of solid gold textured with stippled divots hugs a high-polish solid-gold seam ring to create an added flare of texture and style.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/hammered-fan-seam-ring-in-gold-from-dusk-body-jewelry?variant=45003735859509 https://infinitebody.com/cdn/shop/files/HammeredFanSeamRGDusk.jpg?v=1683057074&width=1024 Dusk Body Jewelry new in_stock 350.00 USD 196 52811062247733 Blood Lust Chain in Gold from Hialeah - 16g (1.2mm) / 34mm / 14k Yellow Gold with Garnet A single 4mm by 6mm pear-cut genuine stone in a bezel setting hangs at the center of a playful solid-gold chain, flanked on either side by 4mm oval-cut genuine stones of the same variety.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/blood-lust-chain-in-gold-from-hialeah?variant=52811062247733 https://infinitebody.com/cdn/shop/files/BloodLustChainYGGarnetHialeah.jpg?v=1777651769&width=1024 Hialeah new in_stock 170.00 USD 196 48080261447989 Blood Lust Chain in Gold from Hialeah - 16g (1.2mm) / 40mm / 14k Yellow Gold with Garnet A single 4mm by 6mm pear-cut genuine stone in a bezel setting hangs at the center of a playful solid-gold chain, flanked on either side by 4mm oval-cut genuine stones of the same variety.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/blood-lust-chain-in-gold-from-hialeah?variant=48080261447989 https://infinitebody.com/cdn/shop/files/BloodLustChainYGGarnetHialeah.jpg?v=1777651769&width=1024 Hialeah new in_stock 180.00 USD 196 44712360345909 Tonali Hinged Ring in Gold from Quetzalli - 16g / 3/8" / 14k Yellow Gold with Black Enamel Stacked symmetrical rectangles of solid gold with inlaid enamel hang at the apex of a solid-gold hinged ring to create a dripping, geometric accent for your piercing.The single-snap hinged closure allows for easy opening and closing and makes this jewelry simple to change, all while allowing for a snug and comfortable fit. https://infinitebody.com/products/tonali-hinged-ring-in-gold-from-quetzalli?variant=44712360345909 https://infinitebody.com/cdn/shop/products/TonaliHingedRingYGBlackEnamelQuetzalli.jpg?v=1679498722&width=1024 Quetzalli new in_stock 310.00 USD 196 44712225440053 Koi Hinged Ring in Gold from Quetzalli - 16g (1.2mm) / 3/8" / 14k Yellow Gold High-polish 2mm beads hug the bottom edge of a solid gold ring creating a decorative, but elegant accent for your piercing.The single-snap hinged closure allows for easy opening and closing and makes this jewelry simple to change, all while allowing for a snug and comfortable fit. https://infinitebody.com/products/koi-hinged-ring-in-gold-from-quetzalli?variant=44712225440053 https://infinitebody.com/cdn/shop/products/KoiHingedRingGroupQuetzalli.jpg?v=1679497950&width=1024 Quetzalli new in_stock 280.00 USD 196 44703860261173 Talia Seam Ring in Gold from Leroi - 16g (1.2mm) / 11/32" / 14k Rose Gold Three-bead clusters dot the edge of this high-polish ring made from solid gold.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/talia-seam-ring-in-gold-from-leroi?variant=44703860261173 https://infinitebody.com/cdn/shop/products/TaliaSeamRingGroupLeroi.jpg?v=1679436944&width=1024 LeRoi new in_stock 190.00 USD 196 44617340944693 Barbie Press-fit End in Gold from Maya Jewelry - 14k Rose Gold A solid gold seamless ring of realistic barbed wire sure to spike the interest of both the polished and punk. Measures approximately 7mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/barbie-press-fit-end-in-gold-from-maya-jewelry?variant=44617340944693 https://infinitebody.com/cdn/shop/products/BarbiePFERGMaya.jpg?v=1678303880&width=1024 Maya Jewelry new in_stock 150.00 USD 196 51228998566197 Gemmed Kappa 04 Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Pink Tourmaline A textured solid gold band circles a single 3mm prong-set genuine stone creating an airy, geometric setting that highlights the stone using negative space. Measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/gemmed-kappa-04-press-fit-end-in-gold-from-tether-jewelry?variant=51228998566197 https://infinitebody.com/cdn/shop/files/GemmedKappa04PFERGPinkTourmalineTether.jpg?v=1755707591&width=1024 Tether Jewelry new in_stock 370.00 USD 196 47967436570933 Gemmed Kappa 04 Press-fit End in Gold from Tether Jewelry - 14k White Gold / Pink Tourmaline A textured solid gold band circles a single 3mm prong-set genuine stone creating an airy, geometric setting that highlights the stone using negative space. Measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/gemmed-kappa-04-press-fit-end-in-gold-from-tether-jewelry?variant=47967436570933 https://infinitebody.com/cdn/shop/files/GemmedKappaPFEWGPinkTourmalineTether.jpg?v=1755707591&width=1024 Tether Jewelry new in_stock 370.00 USD 196 47967364153653 Gemmed Omega 24 Press-fit End in Gold from Tether Jewelry - 14k White Gold / Amethyst A single 3mm prong-set genuine stone is encircled by gold millgrain with a subtle geometric motif. Measures approximately 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/gemmed-omega-24-press-fit-end-in-gold-from-tether-jewelry?variant=47967364153653 https://infinitebody.com/cdn/shop/files/GemmedOmega24WGAmethystTether.jpg?v=1755706805&width=1024 Tether Jewelry new in_stock 365.00 USD 196 47967364219189 Gemmed Omega 24 Press-fit End in Gold from Tether Jewelry - 14k White Gold / London Blue Topaz A single 3mm prong-set genuine stone is encircled by gold millgrain with a subtle geometric motif. Measures approximately 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/gemmed-omega-24-press-fit-end-in-gold-from-tether-jewelry?variant=47967364219189 https://infinitebody.com/cdn/shop/files/GemmedOmega24WGLondonBlueTopazTether.jpg?v=1755706805&width=1024 Tether Jewelry new in_stock 365.00 USD 196 51228790096181 Gemmed Omega 24 Press-fit End in Gold from Tether Jewelry - 14k White Gold / Oregon Sunstone A single 3mm prong-set genuine stone is encircled by gold millgrain with a subtle geometric motif. Measures approximately 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/gemmed-omega-24-press-fit-end-in-gold-from-tether-jewelry?variant=51228790096181 https://infinitebody.com/cdn/shop/files/GemmedOmega24PFEWGOregonSunstoneTether.jpg?v=1755706805&width=1024 Tether Jewelry new in_stock 365.00 USD 196 44418878669109 Vibrant Seam Ring in Gold from Pupil Hall - 18g 5/16" / 14k Yellow Gold / Sunny Yellow Enamel A brightly colored enamel bead sits at the center of a cable chain that dangles freely from a solid gold seam ring.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. https://infinitebody.com/products/vibrant-seam-ring-in-gold-from-pupil-hall?variant=44418878669109 https://infinitebody.com/cdn/shop/products/VibrantSeamRingYGSunnyYellowEnamelPupilHall.jpg?v=1675972301&width=1024 Pupil Hall new in_stock 174.00 USD 196 44186987495733 Deco Press-fit End in Gold from Tether Jewelry - 14k White Gold Solid-gold rays burst from a central raised solid-gold diamond shape, creating a luminous fan effect. Measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/deco-press-fit-end-in-gold-from-tether-jewelry?variant=44186987495733 https://infinitebody.com/cdn/shop/products/DecoPFEWGTether.jpg?v=1672338455&width=1024 Tether Jewelry new in_stock 225.00 USD 196 44186982023477 Galaxia Press-fit End in Gold from Tether Jewelry - 14k Yellow Gold / Rutilated Quartz and Black Diamond Eight 1mm prong-set genuine stones surround a 4mm genuine stone cabochon held in a solid-gold prong setting. Measures approximately 6mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/galaxia-press-fit-end-in-gold-from-tether-jewelry?variant=44186982023477 https://infinitebody.com/cdn/shop/products/GalaxiaPFEYGRutilatedQuartzTether.jpg?v=1713284588&width=1024 Tether Jewelry new in_stock 405.00 USD 196 44186853835061 Hex Diamond Drop Press-fit End in Gold from Tether Jewelry - 14k Rose Gold / Diamond A single 1mm genuine stone encircled in a solid-gold bezel setting hangs from a lightly engraved solid-gold hexagon by a single jump ring. Measures approximately 3mm by 7mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/hex-diamond-drop-press-fit-end-in-gold-from-tether-jewelry?variant=44186853835061 https://infinitebody.com/cdn/shop/products/HexDiamondPFERGDiamondTether.jpg?v=1677871019&width=1024 Tether Jewelry new in_stock 215.00 USD 196 44074166190389 Triple Stacked Gem Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 5/16" / Clear CZ This ASTM F-136 implant grade titanium ring features three tiered rows of 1mm prong-set stones, giving the illusion of multiple rings stacked into one with the ease of a single snap closure to allow for convenient insert and removal. https://infinitebody.com/products/triple-stacked-gem-clicker-in-titanium-from-diablo-organics?variant=44074166190389 https://infinitebody.com/cdn/shop/products/TripleStackedGemClickerTiCZDiablo.jpg?v=1669934841&width=1024 Diablo Organics new in_stock 75.00 USD 196 44074157474101 Double Row Gem Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 5/16" / Clear CZ Two rows of 1mm prong-set stones connected at either end gently taper away from one another to create the illusion of two rings in one. This ring is made from ASTM F-136 implant grade titanium and has a single snap closure to allow for easy opening and closing, making the jewelry simple to change while allowing for a secure and comfortable fit. https://infinitebody.com/products/double-row-gem-clicker-in-titanium-from-diablo-organics?variant=44074157474101 https://infinitebody.com/cdn/shop/products/DoubleRowClickerTiCZDiablo.jpg?v=1669934692&width=1024 Diablo Organics new in_stock 45.00 USD 196 44074157506869 Double Row Gem Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 3/8" / Clear CZ Two rows of 1mm prong-set stones connected at either end gently taper away from one another to create the illusion of two rings in one. This ring is made from ASTM F-136 implant grade titanium and has a single snap closure to allow for easy opening and closing, making the jewelry simple to change while allowing for a secure and comfortable fit. https://infinitebody.com/products/double-row-gem-clicker-in-titanium-from-diablo-organics?variant=44074157506869 https://infinitebody.com/cdn/shop/products/DoubleRowClickerTiCZDiablo.jpg?v=1669934692&width=1024 Diablo Organics new in_stock 45.00 USD 196 44074133160245 Sun Gem Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 5/16" / Clear CZ Titanium spokes of alternating lengths encircle a row of 1mm prong-set stones to create a sunburst effect in this ring made of ASTM F-136 implant grade titanium. The single snap-hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a secure and comfortable fit. https://infinitebody.com/products/sun-gem-clicker-in-titanium-from-diablo-organics?variant=44074133160245 https://infinitebody.com/cdn/shop/products/SunClickerTiCZDiablo.jpg?v=1669934388&width=1024 Diablo Organics new in_stock 60.00 USD 196 44074133193013 Sun Gem Clicker in Titanium from Diablo Organics - 16g (1.2mm) / 3/8" / Clear CZ Titanium spokes of alternating lengths encircle a row of 1mm prong-set stones to create a sunburst effect in this ring made of ASTM F-136 implant grade titanium. The single snap-hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a secure and comfortable fit. https://infinitebody.com/products/sun-gem-clicker-in-titanium-from-diablo-organics?variant=44074133193013 https://infinitebody.com/cdn/shop/products/SunClickerTiCZDiablo.jpg?v=1669934388&width=1024 Diablo Organics new in_stock 60.00 USD 196 44073913155893 Heart Press-fit End in Titanium from NeoMetal - High Polish Titanium / 4mm A sweet and simple heart machined from implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/heart-press-fit-end-in-titanium-from-neometal?variant=44073913155893 https://infinitebody.com/cdn/shop/products/HeartPFETiGroupNeoMetal.jpg?v=1669925928&width=1024 NeoMetal new in_stock 20.00 USD 196 44073913188661 Heart Press-fit End in Titanium from NeoMetal - High Polish Titanium / 5mm A sweet and simple heart machined from implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/heart-press-fit-end-in-titanium-from-neometal?variant=44073913188661 https://infinitebody.com/cdn/shop/products/HeartPFETiGroupNeoMetal.jpg?v=1669925928&width=1024 NeoMetal new in_stock 20.00 USD 196 44073891266869 Moon Press-fit End in Titanium from NeoMetal - High Polish Titanium / 4mm A flat crescent moon made from implant grade titanium (ASTM F136 6Al-4V ELI).Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/moon-press-fit-end-in-titanium-from-neometal?variant=44073891266869 https://infinitebody.com/cdn/shop/products/MoonPFEGroupNeoMetal.jpg?v=1669925184&width=1024 NeoMetal new in_stock 20.00 USD 196 44073891299637 Moon Press-fit End in Titanium from NeoMetal - High Polish Titanium / 5mm A flat crescent moon made from implant grade titanium (ASTM F136 6Al-4V ELI).Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/moon-press-fit-end-in-titanium-from-neometal?variant=44073891299637 https://infinitebody.com/cdn/shop/products/MoonPFEGroupNeoMetal.jpg?v=1669925184&width=1024 NeoMetal new in_stock 20.00 USD 196 44073891365173 Moon Press-fit End in Titanium from NeoMetal - Titanium Anodized Gold / 4mm A flat crescent moon made from implant grade titanium (ASTM F136 6Al-4V ELI).Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/moon-press-fit-end-in-titanium-from-neometal?variant=44073891365173 https://infinitebody.com/cdn/shop/products/MoonPFEGroupNeoMetal.jpg?v=1669925184&width=1024 NeoMetal new in_stock 22.00 USD 196 44073891397941 Moon Press-fit End in Titanium from NeoMetal - Titanium Anodized Gold / 5mm A flat crescent moon made from implant grade titanium (ASTM F136 6Al-4V ELI).Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/moon-press-fit-end-in-titanium-from-neometal?variant=44073891397941 https://infinitebody.com/cdn/shop/products/MoonPFEGroupNeoMetal.jpg?v=1669925184&width=1024 NeoMetal new in_stock 22.00 USD 196 43975415988533 Baroness Charm with Chain in Gold from Regalia - 18g (1mm) / 14k Yellow Gold An elegant cable chain connects a solid-gold miniature leaf to a jump ring. Measures approximately 13mm including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/baroness-charm-with-chain-in-gold-from-regalia?variant=43975415988533 https://infinitebody.com/cdn/shop/products/BaronessCharmWithChainYGRegalia.jpg?v=1668200998&width=1024 Regalia new in_stock 135.00 USD 196 43975382499637 Countess Charm with Chain in Gold from Regalia - 18g (1mm) / 14k Yellow Gold A realistic solid-gold Monstera leaf hangs suspended from a jump ring by a length of cable chain, perfect for all plant lovers. Measures 15mm including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/countess-charm-with-chain-in-gold-from-regalia?variant=43975382499637 https://infinitebody.com/cdn/shop/products/CountessCharmYGRegalia.jpg?v=1668200162&width=1024 Regalia new in_stock 160.00 USD 196 40210722914413 Curved Press-fit Barbell Shaft in Gold from BVLA - 16g (1.2mm) / 3/8" / 18k Yellow Gold A curved press-fit barbell shaft made from solid gold and tapped on both sides for press-fit ends, perfect for mixing and matching.These curved barbell shafts have a small hole on both ends that is made to securely hold press-fit ends. Press-fit ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding press-fit ends for your straight barbell shaft. https://infinitebody.com/products/curved-press-fit-barbell-shaft-in-gold-from-bvla?variant=40210722914413 https://infinitebody.com/cdn/shop/products/PressFitCurvedBarbellGroupBVLA.jpg?v=1657917896&width=1024 BVLA new in_stock 160.00 USD 196 40210722947181 Curved Press-fit Barbell Shaft in Gold from BVLA - 16g (1.2mm) / 7/16" / 18k Yellow Gold A curved press-fit barbell shaft made from solid gold and tapped on both sides for press-fit ends, perfect for mixing and matching.These curved barbell shafts have a small hole on both ends that is made to securely hold press-fit ends. Press-fit ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding press-fit ends for your straight barbell shaft. https://infinitebody.com/products/curved-press-fit-barbell-shaft-in-gold-from-bvla?variant=40210722947181 https://infinitebody.com/cdn/shop/products/PressFitCurvedBarbellYGBVLA.jpg?v=1657917896&width=1024 BVLA new in_stock 175.00 USD 196 45496659968309 Dripping Stone Chain in Gold from Modern Mood - 16g (1.2mm) / 18mm / 14k Yellow Gold with Ruby Prong-set 2mm genuine stones dot the length of a solid gold cable chain, hanging freely from jump rings to create movement and sparkle. 18mm version contains 3 genuine stones, while 35mm version contains 5.Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/dripping-stone-chain-in-gold-from-modern-mood?variant=45496659968309 https://infinitebody.com/cdn/shop/files/DrippingStoneChainYGRubyModernMood_442ef627-8e32-47f2-b46b-c2fc2e701ed9.jpg?v=1689264872&width=1024 Modern Mood new in_stock 410.00 USD 196 40182425321581 Ayla Charm in Gold from Modern Mood - 16g (1.2mm) / 14k Yellow Gold / Diamond A downward-facing solid gold crescent holds six pave-set genuine stones. Flip it backwards for a simple high-polished look. Measures approximately 6mm long including the jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/ayla-charm-in-gold-from-modern-mood?variant=40182425321581 https://infinitebody.com/cdn/shop/products/AylaCharmYGDiamondGroupModernMood.jpg?v=1656540886&width=1024 Modern Mood new in_stock 152.00 USD 196 40180411039853 Mine Press-fit End in Gold from Pupil Hall - 14k Yellow Gold A 5mm high-polished flat disc holds two dangling charms and an arrangement of tiny gold rings that hang freely below. Measures approximately 20mm long.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mine-press-fit-end-in-gold-from-pupil-hall?variant=40180411039853 https://infinitebody.com/cdn/shop/products/MineEndYGPupilHall.jpg?v=1661376801&width=1024 Pupil Hall new in_stock 306.00 USD 196 52555967430965 Belleza Charm in Gold from Hialeah - 14g (1.6mm) / 14k Yellow Gold / Amethyst A 1mm thick rolo chain holding a 4mm by 6mm bezel-set pear-cut genuine stone dangles from a closed jump ring. Charm measures approximately 16mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/belleza-charm-in-gold-from-hialeah?variant=52555967430965 https://infinitebody.com/cdn/shop/files/BellezaCharmYGAmethystHialeah.jpg?v=1775837622&width=1024 Hialeah new in_stock 105.00 USD 196 52555967365429 Belleza Charm in Gold from Hialeah - 14g (1.6mm) / 14k Yellow Gold / Citrine A 1mm thick rolo chain holding a 4mm by 6mm bezel-set pear-cut genuine stone dangles from a closed jump ring. Charm measures approximately 16mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/belleza-charm-in-gold-from-hialeah?variant=52555967365429 https://infinitebody.com/cdn/shop/files/BellezaCharmYGCitrineHialeah.jpg?v=1775837622&width=1024 Hialeah new in_stock 105.00 USD 196 50257701437749 Belleza Charm in Gold from Hialeah - 14g (1.6mm) / 14k Yellow Gold / Garnet A 1mm thick rolo chain holding a 4mm by 6mm bezel-set pear-cut genuine stone dangles from a closed jump ring. Charm measures approximately 16mm long including jump ring.Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/belleza-charm-in-gold-from-hialeah?variant=50257701437749 https://infinitebody.com/cdn/shop/files/BellezaCharmYGGarnetHialeah1.jpg?v=1775837622&width=1024 Hialeah new in_stock 105.00 USD 196 44713752363317 Divine Chain in Gold from Hialeah - 16g (1.2mm) / 35mm / 14k Yellow Gold A shorter 2mm thick diamond-cut curb chain sits above a longer 1.2mm thick curb chain.Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings.Sold as a single chain. Barbell not included. https://infinitebody.com/products/divine-chain-in-gold-from-hialeah?variant=44713752363317 https://infinitebody.com/cdn/shop/products/DivineChainGroupHialeah.jpg?v=1679509200&width=1024 Hialeah new in_stock 150.00 USD 196 51074016739637 Briolette Charm in Gold from Diablo Organics - 12g (2mm) / 14k Yellow Gold / Black Spinel Rough-cut genuine stone teardrops are suspended from a single jump ring and faceted on all sides for maximum sparkle. Measures approximately 4mm by 11mm including the jump ring.Charms are made to be attached to other jewelry, and work well when worn on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry. https://infinitebody.com/products/briolette-charm-in-gold-from-diablo-organics?variant=51074016739637 https://infinitebody.com/cdn/shop/files/TeardropCharmYGBlackSpinelDiabloOrganics.jpg?v=1752688219&width=1024 Diablo Organics new in_stock 95.00 USD 196 40077648298093 Extreme Low Profile Gem Ball Threaded End in Titanium Anodized Gold from Industrial Strength - 14g/12g / 4mm / Clear CZ An internally threaded ball made of implant-grade titanium (ASTM F136 6Al-4V ELI) anodized gold holds a bezel-set brilliant Swarovski crystal. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/extreme-low-profile-gem-ball-threaded-end-in-titanium-anodized-gold-from-industrial-strength?variant=40077648298093 https://infinitebody.com/cdn/shop/products/ExtremeLowProfileThreadedEndGroupIndustrialStrength.jpg?v=1652913048&width=1024 Industrial Strength new in_stock 28.00 USD 196 40077648330861 Extreme Low Profile Gem Ball Threaded End in Titanium Anodized Gold from Industrial Strength - 14g/12g / 5mm / Clear CZ An internally threaded ball made of implant-grade titanium (ASTM F136 6Al-4V ELI) anodized gold holds a bezel-set brilliant Swarovski crystal. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/extreme-low-profile-gem-ball-threaded-end-in-titanium-anodized-gold-from-industrial-strength?variant=40077648330861 https://infinitebody.com/cdn/shop/products/ExtremeLowProfileThreadedEndGroupIndustrialStrength.jpg?v=1652913048&width=1024 Industrial Strength new in_stock 28.00 USD 196 40077640663149 Flat Back Faceted Gem Threaded End in Titanium Anodized Gold from Industrial Strength - 14g / 3mm / Clear CZ A flat foil-backed stone bezel-set in implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow for the appearance of gold at a fraction of the price. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/flat-back-faceted-gem-threaded-end-in-titanium-anodized-gold-from-industrial-strength?variant=40077640663149 https://infinitebody.com/cdn/shop/products/FlatBackFacetedGemAnodizedGoldCZGroupIndustrialStrength.jpg?v=1652913125&width=1024 Industrial Strength new in_stock 22.00 USD 196 40077640695917 Flat Back Faceted Gem Threaded End in Titanium Anodized Gold from Industrial Strength - 14g / 4mm / Clear CZ A flat foil-backed stone bezel-set in implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow for the appearance of gold at a fraction of the price. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/flat-back-faceted-gem-threaded-end-in-titanium-anodized-gold-from-industrial-strength?variant=40077640695917 https://infinitebody.com/cdn/shop/products/FlatBackFacetedGemAnodizedGoldCZGroupIndustrialStrength.jpg?v=1652913125&width=1024 Industrial Strength new in_stock 22.00 USD 196 40065877016685 Flat Bottom Gem Threaded End in Gold from Anatometal - 14g (1.6mm)/12g (2mm) / 3mm Gem / 18k Yellow Gold w/ Clear CZ A foil-backed gem set in an ultra-low profile setting made of solid gold. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/flat-bottom-gem-threaded-end-in-gold-from-anatometal?variant=40065877016685 https://infinitebody.com/cdn/shop/products/FlatBottomGemEndYGCZAnatometal.jpg?v=1657838618&width=1024 Anatometal new in_stock 125.00 USD 196 40065862336621 Hera Threaded End in Gold from Anatometal - 14g/12g / 4mm / 18k White Gold A high-polished dome encircled by a three-tiered beaded border.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/hera-threaded-end-in-gold-from-anatometal?variant=40065862336621 https://infinitebody.com/cdn/shop/products/ThreadedHeraGroupAnatometal.jpg?v=1652300933&width=1024 Anatometal new in_stock 170.00 USD 196 40065862303853 Hera Threaded End in Gold from Anatometal - 14g/12g / 4mm / 18k Yellow Gold A high-polished dome encircled by a three-tiered beaded border.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/hera-threaded-end-in-gold-from-anatometal?variant=40065862303853 https://infinitebody.com/cdn/shop/products/ThreadedHeraGroupAnatometal.jpg?v=1652300933&width=1024 Anatometal new in_stock 170.00 USD 196 40065862369389 Hera Threaded End in Gold from Anatometal - 14g/12g / 5mm / 18k White Gold A high-polished dome encircled by a three-tiered beaded border.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/hera-threaded-end-in-gold-from-anatometal?variant=40065862369389 https://infinitebody.com/cdn/shop/products/ThreadedHeraGroupAnatometal.jpg?v=1652300933&width=1024 Anatometal new in_stock 210.00 USD 196 40065862402157 Hera Threaded End in Gold from Anatometal - 14g/12g / 5mm / 18k Yellow Gold A high-polished dome encircled by a three-tiered beaded border.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/hera-threaded-end-in-gold-from-anatometal?variant=40065862402157 https://infinitebody.com/cdn/shop/products/ThreadedHeraGroupAnatometal.jpg?v=1652300933&width=1024 Anatometal new in_stock 210.00 USD 196 40065843888237 Hammered Disk Threaded End in Gold from Anatometal - 14g/12g / 3mm / 18k Yellow Gold A flat threaded disk with a hammered surface for added texture and interest.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/hammered-disk-threaded-end-in-gold-from-anatometal?variant=40065843888237 https://infinitebody.com/cdn/shop/products/HammeredThreadedDiskGroupAnatometal.jpg?v=1652300020&width=1024 Anatometal new in_stock 140.00 USD 196 40065843921005 Hammered Disk Threaded End in Gold from Anatometal - 14g/12g / 4mm / 18k Yellow Gold A flat threaded disk with a hammered surface for added texture and interest.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/hammered-disk-threaded-end-in-gold-from-anatometal?variant=40065843921005 https://infinitebody.com/cdn/shop/products/HammeredThreadedDiskGroupAnatometal.jpg?v=1652300020&width=1024 Anatometal new in_stock 160.00 USD 196 40065736179821 Disk Threaded End in Gold from Anatometal - 14g (1.6mm)/12g (2mm) / 3mm / 18k Yellow Gold An ultra-flat threaded disk made of solid gold. Simple and classic.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-gold-from-anatometal?variant=40065736179821 https://infinitebody.com/cdn/shop/products/GoldThreadedDiskGroupAnatometal.jpg?v=1652299182&width=1024 Anatometal new in_stock 110.00 USD 196 40065736212589 Disk Threaded End in Gold from Anatometal - 14g (1.6mm)/12g (2mm) / 4mm / 18k Yellow Gold An ultra-flat threaded disk made of solid gold. Simple and classic.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-gold-from-anatometal?variant=40065736212589 https://infinitebody.com/cdn/shop/products/GoldThreadedDiskGroupAnatometal.jpg?v=1652299182&width=1024 Anatometal new in_stock 135.00 USD 196 40065736245357 Disk Threaded End in Gold from Anatometal - 14g (1.6mm)/12g (2mm) / 5mm (3/16") / 18k Yellow Gold An ultra-flat threaded disk made of solid gold. Simple and classic.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-gold-from-anatometal?variant=40065736245357 https://infinitebody.com/cdn/shop/products/GoldThreadedDiskGroupAnatometal.jpg?v=1652299182&width=1024 Anatometal new in_stock 200.00 USD 196 40065719337069 Disk Threaded End in Titanium Anodized Gold from Anatometal - 16g / 3mm A flat disk made of implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow, giving it the look of gold at a fraction of the cost.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-titanium-anodized-gold-from-anatometal?variant=40065719337069 https://infinitebody.com/cdn/shop/products/DiskThreadedEndTitaniumAnodizedGoldGroupAnatometal.jpg?v=1652890610&width=1024 Anatometal new in_stock 15.00 USD 196 40065719369837 Disk Threaded End in Titanium Anodized Gold from Anatometal - 16g / 4mm A flat disk made of implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow, giving it the look of gold at a fraction of the cost.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-titanium-anodized-gold-from-anatometal?variant=40065719369837 https://infinitebody.com/cdn/shop/products/DiskThreadedEndTitaniumAnodizedGoldGroupAnatometal.jpg?v=1652890610&width=1024 Anatometal new in_stock 15.00 USD 196 40065719402605 Disk Threaded End in Titanium Anodized Gold from Anatometal - 14g/12g / 3mm A flat disk made of implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow, giving it the look of gold at a fraction of the cost.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-titanium-anodized-gold-from-anatometal?variant=40065719402605 https://infinitebody.com/cdn/shop/products/DiskThreadedEndTitaniumAnodizedGoldGroupAnatometal.jpg?v=1652890610&width=1024 Anatometal new in_stock 15.00 USD 196 40065719435373 Disk Threaded End in Titanium Anodized Gold from Anatometal - 16g / 5mm A flat disk made of implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow, giving it the look of gold at a fraction of the cost.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-titanium-anodized-gold-from-anatometal?variant=40065719435373 https://infinitebody.com/cdn/shop/products/DiskThreadedEndTitaniumAnodizedGoldGroupAnatometal.jpg?v=1652890610&width=1024 Anatometal new in_stock 15.00 USD 196 40065719468141 Disk Threaded End in Titanium Anodized Gold from Anatometal - 14g/12g / 4mm A flat disk made of implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow, giving it the look of gold at a fraction of the cost.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-titanium-anodized-gold-from-anatometal?variant=40065719468141 https://infinitebody.com/cdn/shop/products/DiskThreadedEndTitaniumAnodizedGoldGroupAnatometal.jpg?v=1652890610&width=1024 Anatometal new in_stock 15.00 USD 196 40065719500909 Disk Threaded End in Titanium Anodized Gold from Anatometal - 14g/12g / 5mm A flat disk made of implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow, giving it the look of gold at a fraction of the cost.Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/disk-threaded-end-in-titanium-anodized-gold-from-anatometal?variant=40065719500909 https://infinitebody.com/cdn/shop/products/DiskThreadedEndTitaniumAnodizedGoldGroupAnatometal.jpg?v=1652890610&width=1024 Anatometal new in_stock 15.00 USD 196 40058212745325 Smashed Seam Ring in Gold from Vira Jewelry - 18g 1/4" / 14k Yellow Gold / Stippled A high-polished seam ring flattened and textured on the lower half. Choose from the following finishes on the “smashed” portion of the ring: stippled, or hammered.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/smashed-seam-ring-in-gold-from-vira-jewelry?variant=40058212745325 https://infinitebody.com/cdn/shop/products/SmashedAndBrushedSeamRingStippledSideVira.jpg?v=1651857527&width=1024 Vira Jewelry new in_stock 110.00 USD 196 40058212712557 Smashed Seam Ring in Gold from Vira Jewelry - 18g 9/32" / 14k Yellow Gold / Stippled A high-polished seam ring flattened and textured on the lower half. Choose from the following finishes on the “smashed” portion of the ring: stippled, or hammered.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/smashed-seam-ring-in-gold-from-vira-jewelry?variant=40058212712557 https://infinitebody.com/cdn/shop/products/SmashedAndBrushedSeamRingStippledSideVira.jpg?v=1651857527&width=1024 Vira Jewelry new in_stock 115.00 USD 196 40058212843629 Smashed Seam Ring in Gold from Vira Jewelry - 16g 1/4" / 14k Yellow Gold / Stippled A high-polished seam ring flattened and textured on the lower half. Choose from the following finishes on the “smashed” portion of the ring: stippled, or hammered.This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only. https://infinitebody.com/products/smashed-seam-ring-in-gold-from-vira-jewelry?variant=40058212843629 https://infinitebody.com/cdn/shop/products/SmashedAndBrushedSeamRingStippledSideVira.jpg?v=1651857527&width=1024 Vira Jewelry new in_stock 140.00 USD 196 40055064854637 Brimstone Press-fit End in Gold from Maya Jewelry - 14k Yellow Gold A low-profile leviathan cross made from solid 14k gold. Measures approximately 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/brimstone-press-fit-end-in-gold-from-maya-jewelry?variant=40055064854637 https://infinitebody.com/cdn/shop/products/BrimstoneYGMaya.jpg?v=1651697862&width=1024 Maya Jewelry new in_stock 140.00 USD 196 40055024189549 Tiny Tuff Press-fit End in Gold from Maya Jewelry - 14k Rose Gold Three petite chain links interlock to create a small, but mighty, design. Measures approximately 6mm by 2mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/tiny-tuff-press-fit-end-in-gold-from-maya-jewelry?variant=40055024189549 https://infinitebody.com/cdn/shop/products/TinyTuffRGMaya.jpg?v=1651695033&width=1024 Maya Jewelry new in_stock 104.00 USD 196 40054997287021 Ball Threaded End in Gold from Leroi - 12g (2mm) / 3/16" / 14k Yellow Gold An internally threaded ball end made from solid 14k gold. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-gold-from-leroi?variant=40054997287021 https://infinitebody.com/cdn/shop/products/ThreadedGoldBallGroupLeroi.jpg?v=1657891565&width=1024 LeRoi new in_stock 204.00 USD 196 40210171625581 Ball Threaded End in Gold from Leroi - 16g (1.2mm) / 1/8" / 14k Rose Gold An internally threaded ball end made from solid 14k gold. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-gold-from-leroi?variant=40210171625581 https://infinitebody.com/cdn/shop/products/ThreadedGoldBallGroupLeroi.jpg?v=1657891565&width=1024 LeRoi new in_stock 86.00 USD 196 40210172772461 Ball Threaded End in Gold from Leroi - 14g (1.6mm) / 5/32" / 14k Yellow Gold An internally threaded ball end made from solid 14k gold. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-gold-from-leroi?variant=40210172772461 https://infinitebody.com/cdn/shop/products/ThreadedGoldBallGroupLeroi.jpg?v=1657891565&width=1024 LeRoi new in_stock 150.00 USD 196 40210172805229 Ball Threaded End in Gold from Leroi - 14g (1.6mm) / 1/8" / 14k Yellow Gold An internally threaded ball end made from solid 14k gold. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-gold-from-leroi?variant=40210172805229 https://infinitebody.com/cdn/shop/products/ThreadedGoldBallGroupLeroi.jpg?v=1657891565&width=1024 LeRoi new in_stock 86.00 USD 196 40210172837997 Ball Threaded End in Gold from Leroi - 12g (2mm) / 5/32" / 14k Yellow Gold An internally threaded ball end made from solid 14k gold. Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-gold-from-leroi?variant=40210172837997 https://infinitebody.com/cdn/shop/products/ThreadedGoldBallYGLeroi.jpg?v=1657891578&width=1024 LeRoi new in_stock 150.00 USD 196 40045044826221 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 14g (1.6mm) / 1/4" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045044826221 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldDetailIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045044858989 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 14g (1.6mm) / 5/16" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045044858989 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045044891757 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 14g (1.6mm) / 3/8" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045044891757 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045044957293 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 14g (1.6mm) / 1/2" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045044957293 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045044990061 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 12g (2mm) / 3/8" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045044990061 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045045055597 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 12g (2mm) / 7/16" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045045055597 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045045022829 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 12g (2mm) / 1/2" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045045022829 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045045088365 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 12g (2mm) / 9/16" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045045088365 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045045121133 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 12g (2mm) / 5/8" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045045121133 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045045186669 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 12g (2mm) / 11/16" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045045186669 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldDetailIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40045045153901 Curved Threaded Barbell Shaft in Titanium Anodized Gold from Industrial Strength - 12g (2mm) / 3/4" An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-anodized-gold-from-industrial-strength?variant=40045045153901 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellShaftTitaniumAnodizedGoldGroupIndustrialStrength.jpg?v=1651166537&width=1024 Industrial Strength new in_stock 26.00 USD 196 40044839698541 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 14g 1/4" / High Polish Titanium / Aurora Borealis An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044839698541 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleAuroraBorealisIndustrialStrength.jpg?v=1651163601&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044839796845 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 14g 1/4" / High Polish Titanium / Champagne An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044839796845 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleChampagneIndustrialStrength.jpg?v=1651163601&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044839600237 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 14g 1/4" / High Polish Titanium / Clear CZ An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044839600237 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleClearCZIndustrialStrength.jpg?v=1651163601&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044839862381 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 14g 1/4" / High Polish Titanium / London Blue Topaz An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044839862381 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleLondonBlueTopazIndustrialStrength.jpg?v=1651163370&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044839633005 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 14g 1/4" / Titanium Anodized Gold / Clear CZ An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044839633005 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleAnodizedGoldCZIndustrialStrength.jpg?v=1651163601&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044839665773 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 14g 5/16" / Titanium Anodized Gold / Clear CZ An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044839665773 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleGroupIndustrialStrength.jpg?v=1651163601&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044840157293 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 3/8" / High Polish Titanium / London Blue Topaz An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044840157293 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleGroupIndustrialStrength.jpg?v=1651163601&width=1024 Industrial Strength new in_stock 85.00 USD 196 45480867365173 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 3/8" / High Polish Titanium / Paradise Shimmer An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=45480867365173 https://infinitebody.com/cdn/shop/files/BezelDangleNavelCurveParadiseShineIndustrialStrength.jpg?v=1688594595&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044840026221 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 7/16" / High Polish Titanium / Champagne An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044840026221 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleChampagneIndustrialStrength.jpg?v=1651163601&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044840190061 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 7/16" / High Polish Titanium / London Blue Topaz An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044840190061 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleLondonBlueTopazIndustrialStrength.jpg?v=1651163370&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044840288365 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 7/16" / High Polish Titanium / Dusty Morganite An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044840288365 https://infinitebody.com/cdn/shop/products/BezelSetFacetedGemCurveWithDangleGroupIndustrialStrength.jpg?v=1651163601&width=1024 Industrial Strength new in_stock 85.00 USD 196 45480867332405 Bezel-set Faceted Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 7/16" / High Polish Titanium / Paradise Shimmer An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faceted-gem-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=45480867332405 https://infinitebody.com/cdn/shop/files/BezelDangleNavelCurveParadiseShineIndustrialStrength.jpg?v=1688594595&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044745359469 Bezel-set Faux-Pal Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 14g 1/4" / High Polish Titanium / Lavender Opal Smooth bezel settings hold matching synthetic opal cabochon stones on this internally threaded curved barbell. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044745359469 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalGemCurveWithDangleLavenderOpalIndustrialStrength.jpg?v=1651159852&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044745392237 Bezel-set Faux-Pal Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 14g 1/4" / High Polish Titanium / White Opal Smooth bezel settings hold matching synthetic opal cabochon stones on this internally threaded curved barbell. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044745392237 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalGemCurveWithDangleGroupIndustrialStrength.jpg?v=1651159852&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044791955565 Bezel-set Faux-Pal Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 7/16" / High Polish Titanium / Lavender Opal Smooth bezel settings hold matching synthetic opal cabochon stones on this internally threaded curved barbell. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044791955565 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalGemCurveWithDangleLavenderOpalIndustrialStrength.jpg?v=1651159852&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044791988333 Bezel-set Faux-Pal Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 3/8" / High Polish Titanium / White Opal Smooth bezel settings hold matching synthetic opal cabochon stones on this internally threaded curved barbell. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044791988333 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalGemCurveWithDangleWhiteOpalIndustrialStrength.jpg?v=1651159852&width=1024 Industrial Strength new in_stock 85.00 USD 196 40044792021101 Bezel-set Faux-Pal Gem Threaded Navel Curve with Dangle in Titanium from Industrial Strength - 12g 7/16" / High Polish Titanium / White Opal Smooth bezel settings hold matching synthetic opal cabochon stones on this internally threaded curved barbell. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-with-dangle-in-titanium-from-industrial-strength?variant=40044792021101 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalGemCurveWithDangleWhiteOpalIndustrialStrength.jpg?v=1651159852&width=1024 Industrial Strength new in_stock 85.00 USD 196 40043345510509 Bezel-set Faux-Pal Gem Threaded Navel Curve in Titanium from Industrial Strength - 12g 3/8" / High Polish Titanium / Lavender Opal Synthetic opal cabochons are held in a smooth bezel setting and sit at either end of this internally threaded curved barbell. The top 4mm stone is removable and the bottom 6mm stone is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-in-titanium-from-industrial-strength?variant=40043345510509 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalNavelCurveGroupIndustrialStrength.jpg?v=1651095766&width=1024 Industrial Strength new in_stock 75.00 USD 196 40043345543277 Bezel-set Faux-Pal Gem Threaded Navel Curve in Titanium from Industrial Strength - 12g 3/8" / High Polish Titanium / White Opal Synthetic opal cabochons are held in a smooth bezel setting and sit at either end of this internally threaded curved barbell. The top 4mm stone is removable and the bottom 6mm stone is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-in-titanium-from-industrial-strength?variant=40043345543277 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalNavelCurveGroupIndustrialStrength.jpg?v=1651095766&width=1024 Industrial Strength new in_stock 75.00 USD 196 40044637454445 Bezel-set Faux-Pal Gem Threaded Navel Curve in Titanium from Industrial Strength - 12g 7/16" / High Polish Titanium / Lavender Opal Synthetic opal cabochons are held in a smooth bezel setting and sit at either end of this internally threaded curved barbell. The top 4mm stone is removable and the bottom 6mm stone is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-in-titanium-from-industrial-strength?variant=40044637454445 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalNavelCurveLavenderOpalIndustrialStrength.jpg?v=1651095766&width=1024 Industrial Strength new in_stock 75.00 USD 196 40044637487213 Bezel-set Faux-Pal Gem Threaded Navel Curve in Titanium from Industrial Strength - 12g 7/16" / High Polish Titanium / White Opal Synthetic opal cabochons are held in a smooth bezel setting and sit at either end of this internally threaded curved barbell. The top 4mm stone is removable and the bottom 6mm stone is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium. https://infinitebody.com/products/bezel-set-faux-pal-gem-threaded-navel-curve-in-titanium-from-industrial-strength?variant=40044637487213 https://infinitebody.com/cdn/shop/products/BezelSetFauxPalNavelCurveWhiteOpalIndustrialStrength.jpg?v=1651095767&width=1024 Industrial Strength new in_stock 75.00 USD 196 40039204487277 NeilCleanse Piercing Aftercare Fine Mist - 6.3 oz An easy to use, fine-mist, sterile saline spray perfect for both home and on the go. Convenient mist tip sprays in any position, including when inverted.Ingredients: USP Grade Water, USP Sodium Chloride (9 mg/mL). Preservative free. https://infinitebody.com/products/neilcleanse-piercing-aftercare-fine-mist?variant=40039204487277 https://infinitebody.com/cdn/shop/files/NeilCleanse.jpg?v=1772460339&width=1024 NeilMed new in_stock 10.00 USD 196 40067731947629 Ball Press-fit End in Titanium Anodized Gold from NeoMetal - 3/32" A timeless essential machined from implant-grade titanium (ASTM F136 6Al-4V ELI), polished to a mirror finish, and anodized golden yellow for the look of gold at a fraction of the cost. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ball-press-fit-end-in-titanium-anodized-gold-from-neometal?variant=40067731947629 https://infinitebody.com/cdn/shop/products/BallPressFitEndTitaniumAnodizedGoldGroupNeoMetal.jpg?v=1652387771&width=1024 NeoMetal new in_stock 14.00 USD 196 39922236129389 Ball Press-fit End in Titanium Anodized Gold from NeoMetal - 1/8" A timeless essential machined from implant-grade titanium (ASTM F136 6Al-4V ELI), polished to a mirror finish, and anodized golden yellow for the look of gold at a fraction of the cost. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/ball-press-fit-end-in-titanium-anodized-gold-from-neometal?variant=39922236129389 https://infinitebody.com/cdn/shop/products/BallPressFitEndTitaniumAnodizedGoldGroupNeoMetal.jpg?v=1652387771&width=1024 NeoMetal new in_stock 14.00 USD 196 39922193793133 Curved Press-fit Post with Side-set Stones in Titanium Anodized Gold from Neometal - 16g (1.2mm) / 1/4" / Clear CZ A curved barbell machined from implant-grade titanium, polished to a mirror finish, and anodized golden yellow. Two Swarovski CZ’s or cabochon gems are bezel set in each end, without the use of glues, ensuring the security of the gem for the life of the jewelry.This product is sold as a complete piece, and includes one attached end and one removable end, each holding a side-set 2.5mm stone. https://infinitebody.com/products/curved-press-fit-post-with-side-set-stones-in-titanium-anodized-gold-from-neometal?variant=39922193793133 https://infinitebody.com/cdn/shop/products/AnodizedSideSetWithStonesCurveGroupNeoMetal.jpg?v=1647540992&width=1024 NeoMetal new in_stock 40.00 USD 196 39922193825901 Curved Press-fit Post with Side-set Stones in Titanium Anodized Gold from Neometal - 16g (1.2mm) / 5/16" / Clear CZ A curved barbell machined from implant-grade titanium, polished to a mirror finish, and anodized golden yellow. Two Swarovski CZ’s or cabochon gems are bezel set in each end, without the use of glues, ensuring the security of the gem for the life of the jewelry.This product is sold as a complete piece, and includes one attached end and one removable end, each holding a side-set 2.5mm stone. https://infinitebody.com/products/curved-press-fit-post-with-side-set-stones-in-titanium-anodized-gold-from-neometal?variant=39922193825901 https://infinitebody.com/cdn/shop/products/AnodizedSideSetWithStonesCurveGroupNeoMetal.jpg?v=1647540992&width=1024 NeoMetal new in_stock 40.00 USD 196 39922193858669 Curved Press-fit Post with Side-set Stones in Titanium Anodized Gold from Neometal - 16g (1.2mm) / 3/8" / Clear CZ A curved barbell machined from implant-grade titanium, polished to a mirror finish, and anodized golden yellow. Two Swarovski CZ’s or cabochon gems are bezel set in each end, without the use of glues, ensuring the security of the gem for the life of the jewelry.This product is sold as a complete piece, and includes one attached end and one removable end, each holding a side-set 2.5mm stone. https://infinitebody.com/products/curved-press-fit-post-with-side-set-stones-in-titanium-anodized-gold-from-neometal?variant=39922193858669 https://infinitebody.com/cdn/shop/products/AnodizedSideSetWithStonesCurveGroupNeoMetal.jpg?v=1647540992&width=1024 NeoMetal new in_stock 40.00 USD 196 39922103517293 Curved Press-fit Post in Titanium Anodized Gold from Neometal - 16g (1.2mm) / 1/4" A press-fit curved barbell made from implant-grade titanium and polished to a mirror finish. These curves are anodized “golden yellow” for the appearance of gold at a fraction of the cost. Each post comes with one ⅛” (3mm) ball attached on one end.Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the removable end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post. https://infinitebody.com/products/curved-press-fit-post-in-titanium-anodized-gold-from-neometal?variant=39922103517293 https://infinitebody.com/cdn/shop/products/AnodizedCurveGroupNeoMetal.jpg?v=1647538591&width=1024 NeoMetal new in_stock 20.00 USD 196 39922103550061 Curved Press-fit Post in Titanium Anodized Gold from Neometal - 16g (1.2mm) / 5/16" A press-fit curved barbell made from implant-grade titanium and polished to a mirror finish. These curves are anodized “golden yellow” for the appearance of gold at a fraction of the cost. Each post comes with one ⅛” (3mm) ball attached on one end.Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the removable end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post. https://infinitebody.com/products/curved-press-fit-post-in-titanium-anodized-gold-from-neometal?variant=39922103550061 https://infinitebody.com/cdn/shop/products/AnodizedCurveGroupNeoMetal.jpg?v=1647538591&width=1024 NeoMetal new in_stock 20.00 USD 196 39922103582829 Curved Press-fit Post in Titanium Anodized Gold from Neometal - 16g (1.2mm) / 3/8" A press-fit curved barbell made from implant-grade titanium and polished to a mirror finish. These curves are anodized “golden yellow” for the appearance of gold at a fraction of the cost. Each post comes with one ⅛” (3mm) ball attached on one end.Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the removable end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post. https://infinitebody.com/products/curved-press-fit-post-in-titanium-anodized-gold-from-neometal?variant=39922103582829 https://infinitebody.com/cdn/shop/products/AnodizedCurveGroupNeoMetal.jpg?v=1647538591&width=1024 NeoMetal new in_stock 20.00 USD 196 39922103615597 Curved Press-fit Post in Titanium Anodized Gold from Neometal - 16g (1.2mm) / 7/16" A press-fit curved barbell made from implant-grade titanium and polished to a mirror finish. These curves are anodized “golden yellow” for the appearance of gold at a fraction of the cost. Each post comes with one ⅛” (3mm) ball attached on one end.Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the removable end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post. https://infinitebody.com/products/curved-press-fit-post-in-titanium-anodized-gold-from-neometal?variant=39922103615597 https://infinitebody.com/cdn/shop/products/AnodizedCurveGroupNeoMetal.jpg?v=1647538591&width=1024 NeoMetal new in_stock 20.00 USD 196 39875594682477 Stella Press-fit End in Gold from Junipurr Jewelry - 14k Rose Gold / Clear CZ A 1mm stone sits in the center of a solid gold star for the perfect amount of twinkle. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/stella-press-fit-end-in-gold-from-junipurr-jewelry?variant=39875594682477 https://infinitebody.com/cdn/shop/products/StellaGroupJunipurr.jpg?v=1645734406&width=1024 Junipurr Jewelry new in_stock 120.00 USD 196 39875594715245 Stella Press-fit End in Gold from Junipurr Jewelry - 14k White Gold / Clear CZ A 1mm stone sits in the center of a solid gold star for the perfect amount of twinkle. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/stella-press-fit-end-in-gold-from-junipurr-jewelry?variant=39875594715245 https://infinitebody.com/cdn/shop/products/StellaGroupJunipurr.jpg?v=1645734406&width=1024 Junipurr Jewelry new in_stock 120.00 USD 196 39875594748013 Stella Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / Clear CZ A 1mm stone sits in the center of a solid gold star for the perfect amount of twinkle. Measures 5mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/stella-press-fit-end-in-gold-from-junipurr-jewelry?variant=39875594748013 https://infinitebody.com/cdn/shop/products/StellaGroupJunipurr.jpg?v=1645734406&width=1024 Junipurr Jewelry new in_stock 120.00 USD 196 39856585212013 Primary Squrrr with Stones Press-fit End in Gold from Pupil Hall - 14k White Gold / Diamond A low profile square cluster of four 1mm bezel-set genuine stones. Measures approximately 4mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/primary-squrrr-with-stones-press-fit-end-in-gold-from-pupil-hall?variant=39856585212013 https://infinitebody.com/cdn/shop/products/PrimaryDiaSqurrWGDiamondGroupPupilHall.jpg?v=1645043394&width=1024 Pupil Hall new in_stock 196.00 USD 196 39856585244781 Primary Squrrr with Stones Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Diamond A low profile square cluster of four 1mm bezel-set genuine stones. Measures approximately 4mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/primary-squrrr-with-stones-press-fit-end-in-gold-from-pupil-hall?variant=39856585244781 https://infinitebody.com/cdn/shop/products/PrimaryDiaSqurrYGDiamondGroupPupilHall.jpg?v=1645043391&width=1024 Pupil Hall new in_stock 196.00 USD 196 39856557326445 Primary Tryangle with Stones Press-fit End in Gold from Pupil Hall - 14k White Gold / Diamond Simple and sweet, three 1mm bezel-set genuine stones are clustered together forming the shape of a triangle. Measures approximately 3mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/primary-tryangle-with-stones-press-fit-end-in-gold-from-pupil-hall?variant=39856557326445 https://infinitebody.com/cdn/shop/products/PrimaryDiaTriangleGroupPupilHall.jpg?v=1645042517&width=1024 Pupil Hall new in_stock 180.00 USD 196 39856557359213 Primary Tryangle with Stones Press-fit End in Gold from Pupil Hall - 14k Yellow Gold / Diamond Simple and sweet, three 1mm bezel-set genuine stones are clustered together forming the shape of a triangle. Measures approximately 3mm across.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/primary-tryangle-with-stones-press-fit-end-in-gold-from-pupil-hall?variant=39856557359213 https://infinitebody.com/cdn/shop/products/PrimaryDiaTriangleGroupPupilHall.jpg?v=1645042517&width=1024 Pupil Hall new in_stock 180.00 USD 196 39841256341613 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 1/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256341613 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256374381 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 5/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256374381 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256308845 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 3/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256308845 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256472685 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 7/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256472685 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252212845 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 1/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252212845 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256570989 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 5/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256570989 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256505453 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 3/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256505453 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256603757 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 7/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256603757 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252147309 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 1/2" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252147309 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841259782253 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 9/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259782253 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256669293 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256669293 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252278381 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 5/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252278381 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252311149 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 3/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252311149 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252081773 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 7/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252081773 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841251950701 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 1/2" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251950701 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252114541 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 9/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252114541 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252049005 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 5/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252049005 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841251983469 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 11/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251983469 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252016237 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 3/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252016237 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252343917 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252343917 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841252376685 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 3/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252376685 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841252409453 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 7/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252409453 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841252442221 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 1/2" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252442221 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841252540525 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 9/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252540525 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841251885165 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 5/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251885165 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841251852397 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 11/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251852397 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841252180077 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 3/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252180077 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841251917933 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251917933 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841257193581 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 3/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257193581 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841257160813 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 7/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257160813 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841257226349 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 1/2" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257226349 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841257455725 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 9/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257455725 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841257586797 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 5/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257586797 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841259749485 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 11/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259749485 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841259716717 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 3/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259716717 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841255817325 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841255817325 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841257619565 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 1/2" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257619565 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841257652333 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 9/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257652333 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841257554029 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 5/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257554029 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841257685101 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 11/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257685101 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841257717869 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 3/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257717869 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841257783405 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257783405 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841257848941 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 1/2" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257848941 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841257816173 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 9/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257816173 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841259454573 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 5/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259454573 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841259487341 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 11/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259487341 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841259520109 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 3/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259520109 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841258012781 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258012781 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841257980013 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 1/2" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257980013 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841258045549 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 9/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258045549 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841258111085 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 5/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258111085 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841257881709 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 11/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257881709 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841259552877 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 3/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259552877 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841259815021 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259815021 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841252573293 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 0g (8mm) / 5/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252573293 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 76.00 USD 196 39841252638829 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 0g (8mm) / 3/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252638829 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 76.00 USD 196 39841252737133 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 0g (8mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252737133 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 76.00 USD 196 39841252769901 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 00g (9-10mm) / 3/4" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252769901 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 90.00 USD 196 39841252802669 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 00g (9-10mm) / 7/8" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841252802669 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 90.00 USD 196 48107334828341 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 9/16" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=48107334828341 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 48107334893877 Circular Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 1/2" A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately.These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft. https://infinitebody.com/products/circular-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=48107334893877 https://infinitebody.com/cdn/shop/products/CircularThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340728&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841260339309 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 1/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841260339309 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841260142701 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 5/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841260142701 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841259946093 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 3/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259946093 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841260273773 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 7/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841260273773 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841250902125 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 16g (1.2mm) / 1/2" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841250902125 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841260306541 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 1/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841260306541 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841259913325 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 5/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259913325 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841255882861 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 3/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841255882861 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841255850093 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 7/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841255850093 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841255915629 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 1/2" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841255915629 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256145005 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256145005 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256177773 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256177773 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841255948397 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841255948397 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256112237 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256112237 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256210541 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256210541 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841259421805 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 14g (1.6mm) / 1" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259421805 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256636525 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 3/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256636525 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256702061 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 7/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256702061 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256734829 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 1/2" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256734829 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256767597 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256767597 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256964205 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256964205 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841256996973 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841256996973 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841257029741 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257029741 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841257062509 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257062509 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841257095277 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 12g (2mm) / 1" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257095277 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 24.00 USD 196 39841260011629 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 3/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841260011629 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841260175469 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 7/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841260175469 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841259978861 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 1/2" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259978861 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841260077165 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841260077165 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841260109933 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841260109933 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841257357421 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257357421 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841257390189 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257390189 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841257422957 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 10g (2.5mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841257422957 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 38.00 USD 196 39841250836589 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 1/2" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841250836589 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841251000429 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251000429 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841251033197 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251033197 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841250869357 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841250869357 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841251065965 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251065965 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841251098733 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251098733 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841250803821 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 8g (3mm) / 1" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841250803821 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 42.00 USD 196 39841251164269 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 7/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251164269 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841251197037 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 1/2" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251197037 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841251229805 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251229805 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841251262573 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251262573 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841251295341 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251295341 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841251328109 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251328109 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841251360877 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251360877 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841251393645 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 6g (4mm) / 1" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251393645 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 53.00 USD 196 39841251131501 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 1/2" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251131501 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841251426413 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251426413 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841251459181 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251459181 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841251590253 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251590253 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841251557485 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251557485 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841251524717 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251524717 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841251491949 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 4g (5mm) / 1" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251491949 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 60.00 USD 196 39841251623021 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251623021 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841251655789 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251655789 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841251688557 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251688557 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841251721325 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251721325 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841251754093 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251754093 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841251786861 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 2g (6mm) / 1" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841251786861 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 63.00 USD 196 39841258143853 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 0g (8mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258143853 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 76.00 USD 196 39841258373229 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 0g (8mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258373229 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 76.00 USD 196 39841258340461 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 0g (8mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258340461 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 76.00 USD 196 39841258176621 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 0g (8mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258176621 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 76.00 USD 196 39841259847789 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 0g (8mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259847789 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 76.00 USD 196 39841259651181 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 00g (9-10mm) / 9/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259651181 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 90.00 USD 196 39841258307693 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 00g (9-10mm) / 5/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258307693 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-withballs-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 90.00 USD 196 39841258274925 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 00g (9-10mm) / 11/16" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258274925 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 90.00 USD 196 39841258242157 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 00g (9-10mm) / 3/4" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841258242157 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 90.00 USD 196 39841259683949 Curved Threaded Barbell Shaft in Titanium from Industrial Strength - 00g (9-10mm) / 7/8" This internally threaded curved barbell shaft is made of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish.Ends must be purchased separately.These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here! https://infinitebody.com/products/curved-threaded-barbell-shaft-in-titanium-from-industrial-strength?variant=39841259683949 https://infinitebody.com/cdn/shop/products/CurvedThreadedBarbellTT-postonly-IndustrialStrength.jpg?v=1644340721&width=1024 Industrial Strength new in_stock 90.00 USD 196 39840240664685 Ball Threaded End in Titanium from Industrial Strength - 16g (1.2mm) / 1/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240664685 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840240697453 Ball Threaded End in Titanium from Industrial Strength - 16g (1.2mm) / 5/32" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240697453 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840241090669 Ball Threaded End in Titanium from Industrial Strength - 16g (1.2mm) / 3/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241090669 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840240894061 Ball Threaded End in Titanium from Industrial Strength - 14g (1.6mm) / 1/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240894061 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840240599149 Ball Threaded End in Titanium from Industrial Strength - 14g (1.6mm) / 5/32" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240599149 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840240566381 Ball Threaded End in Titanium from Industrial Strength - 14g (1.6mm) / 3/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240566381 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840240631917 Ball Threaded End in Titanium from Industrial Strength - 14g (1.6mm) / 7/32" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240631917 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840241123437 Ball Threaded End in Titanium from Industrial Strength - 12g (2mm) / 1/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241123437 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840241156205 Ball Threaded End in Titanium from Industrial Strength - 12g (2mm) / 5/32" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241156205 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840241188973 Ball Threaded End in Titanium from Industrial Strength - 12g (2mm) / 3/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241188973 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840240533613 Ball Threaded End in Titanium from Industrial Strength - 12g (2mm) / 7/32" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240533613 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840241221741 Ball Threaded End in Titanium from Industrial Strength - 12g (2mm) / 1/4" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241221741 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 13.00 USD 196 39840241254509 Ball Threaded End in Titanium from Industrial Strength - 10g (2.5mm) / 3/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241254509 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 20.00 USD 196 39840240500845 Ball Threaded End in Titanium from Industrial Strength - 10g (2.5mm) / 7/32" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240500845 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 20.00 USD 196 39840240468077 Ball Threaded End in Titanium from Industrial Strength - 10g (2.5mm) / 1/4" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240468077 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 20.00 USD 196 39840241287277 Ball Threaded End in Titanium from Industrial Strength - 10g (2.5mm) / 5/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241287277 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 20.00 USD 196 39840241320045 Ball Threaded End in Titanium from Industrial Strength - 10g (2.5mm) / 3/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241320045 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 20.00 USD 196 39840241352813 Ball Threaded End in Titanium from Industrial Strength - 8g (3mm) / 7/32" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241352813 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 22.00 USD 196 39840240828525 Ball Threaded End in Titanium from Industrial Strength - 8g (3mm) / 1/4" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240828525 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 22.00 USD 196 39840240861293 Ball Threaded End in Titanium from Industrial Strength - 8g (3mm) / 5/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240861293 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 22.00 USD 196 39840241385581 Ball Threaded End in Titanium from Industrial Strength - 8g (3mm) / 3/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241385581 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 22.00 USD 196 44162891415861 Ball Threaded End in Titanium from Industrial Strength - 8g (3mm) / 7/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=44162891415861 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 22.00 USD 196 39840241025133 Ball Threaded End in Titanium from Industrial Strength - 8g (3mm) / 1/2" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241025133 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 22.00 USD 196 39840240959597 Ball Threaded End in Titanium from Industrial Strength - 6g (4mm) / 1/4" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240959597 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 28.00 USD 196 39840240795757 Ball Threaded End in Titanium from Industrial Strength - 6g (4mm) / 5/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240795757 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 28.00 USD 196 39840240762989 Ball Threaded End in Titanium from Industrial Strength - 6g (4mm) / 3/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240762989 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 28.00 USD 196 39840240992365 Ball Threaded End in Titanium from Industrial Strength - 6g (4mm) / 7/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240992365 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 28.00 USD 196 39840240730221 Ball Threaded End in Titanium from Industrial Strength - 6g (4mm) / 1/2" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240730221 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 28.00 USD 196 39840241057901 Ball Threaded End in Titanium from Industrial Strength - 4g (5mm) / 5/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241057901 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 30.00 USD 196 39840241418349 Ball Threaded End in Titanium from Industrial Strength - 4g (5mm) / 3/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241418349 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 30.00 USD 196 39840241451117 Ball Threaded End in Titanium from Industrial Strength - 4g (5mm) / 7/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241451117 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 30.00 USD 196 39840240926829 Ball Threaded End in Titanium from Industrial Strength - 4g (5mm) / 1/2" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240926829 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 30.00 USD 196 39840241483885 Ball Threaded End in Titanium from Industrial Strength - 2g (6mm) / 7/16" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241483885 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 34.00 USD 196 39840241516653 Ball Threaded End in Titanium from Industrial Strength - 2g (6mm) / 1/2" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241516653 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 34.00 USD 196 39840241549421 Ball Threaded End in Titanium from Industrial Strength - 0g (8mm) / 1/2" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241549421 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 36.00 USD 196 39840240435309 Ball Threaded End in Titanium from Industrial Strength - 0g (8mm) / 5/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840240435309 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 36.00 USD 196 39840241582189 Ball Threaded End in Titanium from Industrial Strength - 00g (9-10mm) / 1/2" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241582189 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 38.00 USD 196 39840241614957 Ball Threaded End in Titanium from Industrial Strength - 00g (9-10mm) / 5/8" The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish.Sold individually. For a pair, select a quantity of 2.These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end. https://infinitebody.com/products/ball-threaded-end-in-titanium-from-industrial-strength?variant=39840241614957 https://infinitebody.com/cdn/shop/products/BallThreadedEndTTIndustrialStrength.jpg?v=1644275007&width=1024 Industrial Strength new in_stock 38.00 USD 196 39763387220077 Mini Butterfly Press-fit End in Gold from Junipurr Jewelry - 14k Yellow Gold / Clear CZ A miniature gold butterfly featuring two tiny stones in each wing. Measures 3mm by 4mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/mini-butterfly-press-fit-end-in-gold-from-junipurr-jewelry?variant=39763387220077 https://infinitebody.com/cdn/shop/products/MiniButterflyYGCZJunipurr.jpg?v=1640906729&width=1024 Junipurr Jewelry new in_stock 100.00 USD 196 39636661993581 Droplet Press-fit End in Gold from Pupil Hall - 14k Rose Gold / Diamond A perfectly balanced design featuring a 1.5mm prong-set genuine stone at the center with radiating textured gold bars above and a little droplet of solid gold dangling freely below. Measures 4 x 6.5mm.Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end. https://infinitebody.com/products/droplet-press-fit-end-in-gold-from-pupil-hall?variant=39636661993581 https://infinitebody.com/cdn/shop/products/DropletGroupPupilHall.jpg?v=1633999050&width=1024 Pupil Hall new in_stock 194.00 USD 196