Shop for Body Jewelry

A recessed, stippled surface is surrounded by a textured perimeter in this striking press-fit end. Measures 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A simple triangle with a rough surface recessed inside a textured border. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

From the depths of the ocean come these playfully quirky and ultra-textured cast brass weights. Each piece measures approximately 1 ½” overall and weighs 20 grams. Must be at least 00g to wear.

Patterned brass weights with maze-like reliefs and turquoise and red amber inlays are suspended from silver hooks for comfortable and secure wear. As they are lightly shaken or swung, there is a pleasant jingling coming from within. Each piece measures approximately 2 ½” long and weighs 26 grams. Must be at least 7/16” to wear.

Simple yet elegant coiled hoops made of solid silver. These hoops measure approximately 1” across and weigh 12 grams each.

A grouping of four marquise-cut gemstones set on an ever-so-slight curve. Mini holds 1.5mm by 3mm stones and measures approximately 8mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three prong-set stones are arranged in a gentle curve. Mini holds 1.5mm stones and measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, implant-grade titanium disk for a simple and versatile design. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A charming butterfly with wings made of two 1.5mm by 3mm marquise-cut gemstones and two 1.5mm prong-set gemstones perched below. Measures 4.5mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Five marquise-cut gemstones arranged in a subtle curve. Mini holds 1.5mm by 3mm stones and measures approximately 4mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A hexagon with a raised interior and a textured border emanates fortitude. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A realistic, miniature cleaver dangles freely from a short length of cable chain for a menacing addition to a press-fit end or ring. Measures approximately 21mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Faceted and interconnected links of solid gold form a length of naturally twisting chain with a sophisticated and subtle shine. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold individually. Barbell not included.

Three rows of 0.5mm and 1mm prong-set gemstones fan out in an opulent display. Measures 4mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A solid gold disk with a row of five prong-set gemstones down its center exudes a modern chic. Measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An asymmetrical design with two rough-textured slabs of solid gold hanging freely from diamond-cut figaro chains. Measures approximately 22mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A weathered teardrop, elegant yet gritty. Measures 2.5mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A pillar of roughly hammered texture in solid gold. Short measures approximately 9mm long including the jump ring. Medium measures approximately 13mm long including the jump ring. Long measures approximately 17mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A trio of baguette-cut genuine stones staggered on a subtle curve. Measures 3.5mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A trio of high-polished bead clusters garnish a rolo chain that radiates a creative and playful spirit. Measures 3mm by 28.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

High-polished beads arranged in a modern, dynamic square. Small measures approximately 2mm across. Large measures approximately 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A dynamic, implant-grade titanium claw setting clasps a genuine stone bead. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color. Sold as singles. For a pair, order a quantity of 2. Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post.

A bullet-cut genuine stone set in a sleek, implant-grade titanium claw setting. Ends with a 4mm diameter measure about 7mm tall. Due to the one-of-a-kind nature of these stones please expect slight variations in their color. Sold as singles. For a pair, order a quantity of 2. Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post.

A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color. Sold as singles. For a pair, order a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.