Industrial Strength

A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A straight, internally threaded barbell shaft made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Ends must be purchased separately. This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 16g to 8g, shop here . These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft.

A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An internally threaded ball made of implant-grade titanium (ASTM F136 6Al-4V ELI) anodized gold holds a bezel-set brilliant Swarovski crystal. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A flat foil-backed stone bezel-set in implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow for the appearance of gold at a fraction of the price. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost. Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.

Sparkling Swarovski crystals are prong-set in titanium on both ends of these internally threaded gemmed curved barbells. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings and made of implant-grade titanium.

An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium.

Smooth bezel settings hold matching synthetic opal cabochon stones on this internally threaded curved barbell. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium.

Synthetic opal cabochons are held in a smooth bezel setting and sit at either end of this internally threaded curved barbell. The top 4mm stone is removable and the bottom 6mm stone is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium.

A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately. These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft.

This internally threaded curved barbell shaft is made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here !

The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A flat foil-backed gem is bezel-set (not glued) in implant grade titanium for an ultra-low profile look. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Each end has a stone bead set in implant-grade titanium in a minimal three-prong setting. These stones are set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Straight internally threaded barbell shafts in sizes from 16g to 8g, made of implant-grade stainless steel (ASTM F-138 316LVM) polished to a mirror finish. Ends must be purchased separately. This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 6g to 00g, shop here . These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft.

Straight internally threaded barbell shafts in sizes from 6g to 00g, made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. Ends must be purchased separately. This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 16g to 8g, shop here . These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft.

A straight, internally threaded barbell shaft made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Ends must be purchased separately. This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 6g to 00g, shop here. These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft.

A three-prong setting made of implant-grade titanium holds a synthetic opal bead. These opals are set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Brilliant Swarovski crystals are held in a three-pronged setting made of implant-grade titanium. Each faceted stone is set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with both 14g (1.6mm) and 12g (2mm) internally threaded barbell shafts and posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A curved internally threaded barbell shaft, made of implant-grade stainless steel (ASTM F-138 316LVM) polished to a mirror finish. Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.

A conical spike made for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A smooth synthetic stone cabochon in a super-low-profile setting made of implant-grade titanium. These stones are bezel-set (not glued), to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An ultra-low profile setting made of implant-grade titanium with a flat foil-backed gem with brilliant shine and reflection. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.