Hialeah Fine Jewelry

A textured, winding snake designed to be suspended from other jewelry as a fierce accent. Measures 7mm by 9mm. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A simple chain is transformed into a design of mesmerizing exuberance with the addition of three faceted genuine stones. Outer marquise-cut stones measures 4mm by 6mm and the center oval-cut stone measures 3mm by 3.5mm. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 4mm by 10mm titanium-coated stone with a 3mm stone accent dangle freely from a solid gold seam ring from two sturdy lengths of titanium cable and curb chains. A proprietary process is used to coat one of the stones in a thin layer of titanium giving it a sleek, metallic finish. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A series of five 4mm bezel-set genuine stones are linked together to create a bold and glamorous chain. Chain that is 44mm holds 5 genuine stones. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 3mm by 4mm baguette-cut genuine stone dangles from a wispy length of anchor tassel chain. Measures approximately 17mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 4.5mm by 6.5mm labradorite briolette hangs from a beaded flat cable chain. Measures approximately 18mm. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 6.5mm by 25mm Montana Agate cylinder moves freely along a twisted, faceted chain that is punctuated by a flat cable chain tassel. Measures 62mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 3.5mm by 7mm marquise-cut genuine stone hangs from a rounded box chain and is paired with a length of diamond-cut singapore chain for a sleek and delicate look. Measures approximately 29mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 4mm by 8mm marquise-cut genuine stone dangles from a short wisp of rolo chain. Measures approximately 16mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 3mm by 5mm baguette-cut genuine stone and a 3mm by 6mm marquise-cut genuine stone are paired together, both dangling from a gold cable chain. Measures approximately 24mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 9mm by 12mm kite-cut genuine stone is suspended from two lengths of flat cable chain. Measures 30mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 3mm by 5mm pear-cut genuine stone suspended on an eye-catching starburst chain. Measures approximately 13mm long with chain and jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Two tightly woven, complementary lengths of curb chain elevated by a 3mmm bezel-set genuine stone tassel. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 2mm by 9mm high-polished gold bar flows from a short length of chain. Measures approximately 21mm long with the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A grand 6mm bezel-set genuine stone dangles from a petite solid gold chain. Measures 15mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 1.2mm thick cable chain is paired with a 1.2mm thick curb chain and suspended between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Three variegated chains hang from a bezel-set pear-cut genuine 4x5mm stone. Charm measures approximately 24mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 4mm by 6mm pear-cut genuine stone in a sleek bezel setting is suspended from a solid-gold chain, perfect for providing a bit of drama and dimension to a ring or press-fit end. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A closed jump ring holds a 4mm by 6mm bezel-set pear-cut genuine stone, adding the perfect accent of movement and color to your piercing. Charm measures approximately 13mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A diamond-cut figaro chain with a matching charm accent on one end holding a high-polished 6mm gold bar, for a little extra glamour. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Three hanging lengths of rolo chain ending in solid-gold beaded flower charms appear to drip from the center of a solid-gold chain of the same variety suspended between jump rings. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Two arcs of solid-gold starburst chain are suspended between two jump rings, highlighted on one side by a tasseled charm featuring a 4mm by 6mm pear-cut genuine stone charm in a solid-gold bezel setting. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Two 4mm by 6mm marquise-cut genuine stones in solid-gold bezel settings hang from jump rings by identical lengths of cable chain, creating a valley of negative space with a single 5mm brilliant-cut genuine stone at its apex. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A single 4mm by 6mm pear-cut genuine stone in a bezel setting hangs at the center of a solid-gold starburst chain, flanked on either side by 4mm oval-cut genuine stones of the same variety. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.