Sacred Symbols

Rays of solid gold beads burst forth around an outward-facing 2mm prong-set gemstone. The wearer has the ability to orient this piece in a variety of ways to achieve different looks. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A sleek ring holds an outward-facing 2.5mm prong-set genuine stone crowned with high-polished beads that can be worn in a variety of ways to achieve unique looks. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

This unique ring showcases an outward-facing 3mm prong-set genuine stone from which a fan of flower petals burst forth. The wearer can orient this ring in a variety of ways to achieve different looks. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A series of truncated pyramids create a simple and modern arch. Measures 3.5mm by 8.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm prong-set genuine stone placed at the heart of a stippled diamond kite with a subtle matte finish. Measures 4mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A hammered, abstract disk holds a 2mm prong-set genuine stone while anchoring a draped cable chain with geometric accents for added movement and flair. Measures 6mm by 16.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1mm genuine stone sits at the heart of a teardrop of solid gold rays and is crowned with a simple bead. Measures approximately 4.5mm by 6.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm genuine stone perched atop an abstract mingling of solid gold branches from which a tail of two cable chains with geometric accents flows. Measures 4.5mm by 19.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A regal arch made from a 2.5mm by 4mm marquise-cut gemstone nestled between two 1mm prong-set gemstones decorated with bead accents. Measures approximately 6.5mm by 10.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm prong-set genuine stone rests on a bed of textured solid gold, combining grit and glamor. Measures 3.5mm by 4.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An amorphous shield of solid gold with a central 2mm reverse-set genuine stone embedded within its textured surface. Measures approximately 6.5mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A pair of 2.5mm by 4mm marquise-cut gemstones bloom from a 2.5mm prong-set stone in this exuberant interpretation of a flowerbud. Measures 5mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm prong-set genuine stone sits centered in a tapered oval graced with filigree and beaded accents. Measures 5.5mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A prong-set genuine stone is accented by a single gold bead on one side and a high polish kite on the other, adding a uniquely sophisticated flair. Measures approximately 2.5mm by 7mm. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A single prong-set 1.5mm genuine stone held at the center of an expanding nebula of solid-gold spokes, their beaded tips echoing the iconic starburst motif of mid-century modern design. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end

A curved branch of solid gold with four 1mm prong-set genuine stones dotting its length, mimicking leaves sprouting lazily along the length of a branch. Measures approximately 5mm by 10mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A solid-gold arrow crowned by a trio of beads, reminiscent of the lofted treetops of the forest. Measures 4mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An arc of solid gold featuring subtle hills and valleys that lend the face of this design a beautifully organic texture. Measures approximately 2mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A smooth bar of solid gold accented on one end by a single 1.5mm prong-set genuine stone. Measures approximately 2mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An organically-shaped shield of solid gold featuring a mottled surface texture and a single 1mm inset genuine stone. Measures approximately 5mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three prong-set genuine stones in graduating sizes set atop a frame of solid gold. Measures approximately 6mm x 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Concentric rings of solid-gold beads frame a single 2.5mm genuine stone cabochon. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two diamonds of solid gold mirror one another, their beaded details creating a playful and patterned effect. Measures approximately 4mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 3mm by 4mm pear-cut genuine stone enveloped in a uniquely variegated bezel setting of solid gold. Measures approximately 4mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.