Modern Mood

A trio of high-polished bars dangle from a single jump ring for eye-catching movement. Measures approximately 19mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 2.5mm genuine stone held in a talon-like prong setting is accented by a trio of 1mm stones above and a freely moving 1.5mm stone below. Measures approximately 10mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Equal parts sweet and sophisticated, a 2mm claw-set genuine stone is accented with a 1mm solid gold bead. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sleek crescent moon holds 0.25mm, 0.5mm, and 1mm genuine stones. Measures 3.5mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 3mm trillion-cut genuine stone carrying three free-moving marquise beads embodies glamor and balance. Measures 10.5mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single 1mm genuine stone cabochon held atop a solid-gold triangle by three dainty prongs. Measures approximately 2mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Prong-set genuine stones of three graduating sizes hang beneath one another in an elegant tapered line. Measures approximately 2mm by 10mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three 2.5mm prong-set genuine stone cabochons form a tapered chevron, reminiscent of the birds flying south for the winter. Measures approximately 5mm by 10mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Prong-set 2mm genuine stones dot the length of a solid gold cable chain, hanging freely from jump rings to create movement and sparkle. 18mm version contains 3 genuine stones, while 35mm version contains 5. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 2mm solid gold ball hangs fixed to a jump ring. Small and sweet. Measures approximately 4mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 3mm genuine stone sits in subtle prong settings at the center of a solid gold square with three 1mm prong-set genuine stones suspended from each corner of this luxe design. Measures 8mm by 10mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A petite four-pointed star holds five pave-set genuine stones. Measures 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Cable chains of varying lengths forming a waterfall of texture and movement. Graduating chain detail measures approximately 12mm at its longest point. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Three 1.5mm by 3mm marquise beads add a sweet accent to a sweeping length of cable chain. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A pair of 3mm trillion-cut genuine stone charms and a hypnotizing, laser-cut kite charm sway from the ends of an elegant cable chain. Charms at either end of the chain range from approximately 14mm long to 19mm long including the jump ring. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A single genuine stone cabochon nestled in a sleek three-prong setting of solid gold. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A delicate length of solid-gold cable chain hangs suspended between two 1.5mm prong-set genuine stones, perfect for connecting two nearby piercings. Chain measures approximately 13mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A single 4mm by 5mm rose-cut genuine stone wrapped in a sleek open-backed bezel setting of solid gold. Measures approximately 8mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A smooth solid-gold bezel setting encircles a single 2mm by 4mm emerald-cut genuine stone. Measures approximately 8mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 10mm solid gold bar of pave-set genuine stones hangs from the middle of a gold cable chain, flanked on either side by two solid gold bars in tapering lengths for a graduated look. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 4mm genuine stone is bezel-set in gold with an open back, allowing light to pass through the stone, and affixed to a simple jump ring. Measures approximately 7.5mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Two 2mm by 3mm genuine pear-cut stones hang freely from a jump ring by chains of varying lengths, creating a staggered effect. Measures approximately 18mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A downward-facing solid gold crescent holds six pave-set genuine stones. Flip it backwards for a simple high-polished look. Measures approximately 6mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Three 2mm prong-set genuine stones twinkle along the arced length of a solid gold bar, forming a constellation. Measures 5mm by 13mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.