Maya Jewelry

A small solid gold ring adorned with a 1mm gemstone with a trio of 1.2mm rope chains cascading below. Measures 4mm by 14mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An indented sliver of solid gold and a 1.25mm by 2.5mm marquise-cut gemstone make for a charming, asymmetrical pairing of leaves. Measures approximately 3mm by 4.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A solid gold disk with a row of five prong-set gemstones down its center exudes a modern chic. Measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An asymmetrical design with two rough-textured slabs of solid gold hanging freely from diamond-cut figaro chains. Measures approximately 22mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A weathered teardrop, elegant yet gritty. Measures 2.5mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Simple prongs of solid gold hold a faceted genuine stone in a loving embrace allowing the sparkling stone to take center stage. Small measures approximately 5mm by 5.5mm. Large measures approximately 6mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A taut length of cable link chain for the polished punk. Measures 2mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An eight-point star holds a 1mm gemstone at its core showcasing elegance in simplicity. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three cable chains in varying lengths are suspended from a talon-set genuine stone adding movement and fluidity to this mesmerizing design. Small measures approximately 5mm by 12mm. Large measures approximately 6mm by 18mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A wonderfully maximalist take on the classic hoop, these earrings are a chain lover's dream. Stacked rings, industrial accents, and dripping box chains all come together to create a uniquely playful design featuring movement and shine. Each piece measures approximately 4” across, weighs 23 grams, and has an 18g hinged clasp that will fit standard ear piercings.

A trio of marquise-cut stones set in solid gold fan out above a dangling 1mm stone charm, adding a splash of movement to this whimsical, yet balanced, design. Measures approximately 5mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An effortlessly artful chevron of solid-gold with a lightly-faceted surface texture for maximum reflective impact. Measures approximately 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A collar-inspired design consisting of three lengths of chunky box chain dangling from a lightly-ridged non-piercing cuff in gold-plated brass. Great for pierced or unpierced ears. Each piece measures just over 1 3/4” in total length. Sold as singles. For a pair, select a quantity of 2.

A heart-shaped lock charm of solid gold dangles invitingly from a single o-ring affixed to a rectangle featuring riveted surface texture. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A teasingly playful design consisting of a miniature solid-gold lock with its key dangling freely below from a short length of chain. Measures approximately 3mm by 12mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three varied lengths of solid-gold chain capped with miniature charm details hang freely from a jump ring atop a textured solid-gold rectangle. Fearless, yet chic. Measures approximately 6mm by 12mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A s olid gold seamless ring of realistic barbed wire sure to spike the interest of both the polished and punk. Measures approximately 7mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Dangling lengths of box chain come to a point below flat high-polished hoop, mirroring its tapered point. Each piece measures approximately 3 1/4” long, weighs 6 grams, and has an 18g hinged clasp that will fit standard ear piercings.

These are a high-polished variation of large-gauge captive bead rings popularized in the ‘90s, with a convenient hinge for easy insert and removal. A playful and nostalgic nod to our industry’s roots. Each piece measures approximately 7/8” overall and weighs 22 grams. Must be at least 0g to wear.

Whether you have your style totally locked in, or you like to keep it a little unhinged, these high-polished realistic locks both fasten and fascinate. Each piece measures approximately 1 1/4” overall and weighs 26 grams. Must be at least 4g to wear.

Three petite chain links interlock to create a small, but mighty, design. Measures approximately 6mm by 2mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two mirrored snakes frame an arrangement of bezel-set cubic zirconias on either side of these textured gold hoops. Each piece measures just over 1 ½” across and weighs 17 grams, and has an 18g hinged clasp that will fit standard ear piercings.

A gleaming, hammered disk interrupted by a crescent channel of tapered cubic zirconias. Each piece measures just under 1 ½” across and weighs 14 grams, and has an 18g hinged clasp that will fit standard ear piercings.

Staggered rays of gold create a sunny, haloed effect around this gold ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.