Pupil Hall

A sleek, miniature dagger with playful enamel accents. Measures 2.5mm by 9.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, fragmented sword with a dangling blade charm. The miniature, revised version of the signature press-fit end from Pupil Hall . Measures approximately 3.5mm by 13.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm prong-set genuine stone elevates a short length of hefty box chain. Measures approximately 2mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sturdy box chain enhanced by a 2mm genuine stone is paired with a string of three luminous 2.5mm beads for added contrast. Measures approximately 5mm by 12mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A strand of five 2.5mm beads is paired with a box chain and cable chain hybrid in this asymmetrical statement piece. Measures approximately 5mm by 15mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A chain of four 2.5mm high polish beads exudes an effortless magnetism. Measures 2.5mm by 12mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sturdy strand of six 2.5mm solid gold beads gives off a confident air. Measures 2.5mm by 18mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm reverse-set genuine stone, round-cut genuine stone, and enamel accent come together in a cluster of elegant contrast. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A luxe strand of fifteen 2.5mm high-polished beads that can be worn wrapped around a single piercing like a dangling ring, or connected to other jewelry in a nearby piercing. This press-fit end can be worn in any 18g, 16g, or 14g press-fit post, but the jump ring on the end of the chain fits only on 18g or 16g jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sleek, high polish bar charm sways beneath a hybrid chain of bead chain and cable chain. Measures 20mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Three slender bar charms are suspended from a mix of different gold chains, creating a small, tapered curtain of solid gold. Measures 20mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A faceted bead chain is draped below a solid gold pres s-fit post in this versatile, textural design. This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post.

A chic faceted bead chain holds a freely moving 2mm genuine stone charm in this post/ring hybrid design. This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post.

An eye-catching, oversized bead chain affixed to a solid gold press-fit post embodies luxe minimalism. This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post. Size refers to the thickness of the post.

Two 3mm genuine stones create a fluid charm that dangles below a trio of 2.5mm beads. Measures approximately 20mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A cluster of four 1.5mm enamel beads and four 1mm genuine stones are connected by an eye-catching mix of cable chain, faceted bead chain, and box chain. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Posts not included.

A 2mm genuine stone cluster and a 3.5mm enamel cluster are connected by a cable chain in this versatile design. Chain measures 9mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. Multi-point press-fit ends are composed of two connected decorative ends. Therefore, you will need to purchase two press-fit posts for multi-point press-fit ends to ensure that both decorative ends have a corresponding post.

Two complementary lengths of faceted bead chain form sweeping arcs between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A twinkling strand of faceted bead chain suspended between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A pair of asymmetrical solid gold bar charms sway enticingly from a cluster of jump rings. Measures approximately 26mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A dynamic 3mm genuine stone charm is suspended from two 2.5mm solid gold beads. Measures 3mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A refined pairing of a 1.5mm round-cut genuine stone and a 2.5mm reverse-set genuine stone accented by a draped cable chain. Measures approximately 5.5mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished flame anchors an enamel candlestick charm complete with melted wax detailing in this cute and quirky design. Measures 3mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A faceted bead chain sits beside an elegant cable chain in this charming, asymmetrical design. Measures 2mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.