Tether Jewelry

A high polish dagger with a rebellious spirit comes to a keen point. Measures approximately 17mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Three graduating lengths of cable chain create subtle movement when paired with a ring or post. Measures approximately 27mm, including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A sturdy length of cable chain is bisected by a 4mm three-dimensional hexagon showcasing the beauty in the unexpected. Measures approximately 22mm including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A delicate wisp of cable chain is embellished with two 1mm genuine stones in open-back bezel settings. Measures approximately 21mm including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Three lengths of curb chain are suspended from a 4mm rounded triangle with stepped edges embodying geometric glamor. Measures 4mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A luminous, faceted pear holds 1mm and 1.5mm prong-set genuine stones in this modern design. Measures 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A constellation-inspired design of three pave-set 1.5mm genuine stones nestled within a solid gold triangle. Measures 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Six 1.5mm pave-set genuine stones cover the face of a formidable, high-polished triangle. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four 1.5mm genuine stones are cradled by pyramid-shaped prong settings within an opulent square. Measures 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm princess-cut genuine stone sits within a raised beaded square giving it a regal demeanor. Measures approximately 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A chunky solid gold “x” with a timeless flair. Measures 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm prong-set genuine stone rests at the center of this bold interpretation of a dahlia flower. Measures approximately 6.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A prong-set genuine stone rests atop a second, rotated square in this elegant design. Measures approximately 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two indented 3mm cubes hang from asymmetrical cable chains for a dynamic, free-spirited look. Measures approximately 29mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 2mm by 3mm tapered baguette-cut genuine stone sits within a cut-out bezel setting. Measures 13mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A solid gold, rounded triangle sits within a textured border in this striking design. Measures approximately 7mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A classic ring juxtaposes subdued geometric details with a striking emerald-cut stone at the center. Cast in 316L stainless steel and ion-plated in 18k gold. Size refers to the US ring measurement system.

A classic ring featuring a reverse-set stone sits at the center of this textured portrayal of an all seeing eye. Cast in 316L stainless steel and ion-plated in 18k gold. Size refers to the US ring measurement system.

Big, bold, and futuristic triangular weights with a smooth wearable surface for comfortable wear. The body of the weight snaps open at the seam running throughout the weight and closes via internal magnets at the top. Each piece measures just under 2” and weighs 40 grams. Must be at least 0g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

A high-polished hoop dotted with grooves on its perimeter, both rugged and refined. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A 1mm genuine stone sits at the center of an oval radiating with texture. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Six 1mm genuine stones encircle a 1.5mm genuine stone in this extravagant, botanical design. Measures approximately 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, faceted hexagon exhibits captivating depth and shine. Measures approximately 2mm tall by 3mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished teardrop with a subtly faceted surface. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.