Rings & Clickers

A sleek, prong-set 1.5mm by 3mm marquise-cut gemstone adorns the edge of a classic seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A faceted bead chain is draped below a solid gold pres s-fit post in this versatile, textural design. This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post.

A chic faceted bead chain holds a freely moving 2mm genuine stone charm in this post/ring hybrid design. This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post.

An eye-catching, oversized bead chain affixed to a solid gold press-fit post embodies luxe minimalism. This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post. Size refers to the thickness of the post.

These high-polished, hammer-finished tunnels are an alternative to plugs or ear weights. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit. These are about 17mm across on the longer side and 10mm on the hinged side, with an interior diameter of 9mm (3/8"). Each piece weighs 5 grams. Must be at least 1/2” to wear. Sold in pairs.

Marquise-shaped solid gold beads span the edge of a simple ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A singular implant-grade titanium ring with an adjoined partial ring provides the illusion of wearing two rings at once in this dynamic design. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A simple ring embellished with an added splash of color by a fixed enamel-filled bead. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A unique mash-up of box chain and faceted bead chain are highlighted by a sturdy cable chain below a high-polished ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

An innovative faceted bead chain and box chain hybrid draped below a solid gold ring. The epitome of an elevated classic. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A row of gemstones in subtly graduating sizes (1mm, 1.3mm, and 1.5mm) line the side of a solid gold ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A design of pure glamor, embellished with 0.9mm pave-set gemstones on all sides for a sophisticated, textured shine. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A textured matte finish brings a new take to an old classic for a more subdued look. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A seam ring is flattened on the lower portion adding a layer of dimensional elegance to a classic design. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A classic seam ring is partially flattened and adorned with a row of coarse linear texturing across the front. For a different look, wear backward to showcase the subtle matte finish on the back. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Three small divots sit at the center of the flattened portion of this artfully contemporary ring and are further accented by organic texturing on either side. For a more subtle look, wear backwards to showcase the lightly textured matte finish on the back. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A reversible piece reminiscent of Brutalist design on the front with its roughly textured mix of linear scores and dotted stippling across the flattened portion of the ring; worn backwards, showcase the lightly textured matte finish for a more subtle look. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A high-polished hoop dotted with grooves on its perimeter, both rugged and refined. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A continuous ring made from solid 14k gold. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only.

A refreshingly individual ring design consisting of a star-shaped enamel charm suspended from a fixed miniature bead, ensuring the charm always faces front and center. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Seven 1.5mm prong-set genuine stones sit atop a sleek solid-gold ring in an eye-catching, elegant arc. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A trio of 1.5mm and 2mm gemstones bookended by subtle faux wire wrap detailing. A strikingly detailed design in solid 14k gold. When selecting stones from the dropdown the central stone is listed first and accent stones are listed second. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

An artfully beaded solid-gold ring showcasing a central 2.5mm gemstone surrounded on either side by 2mm gemstones and sophisticated faux wire wrapping. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A symmetrical row of two 2mm genuine round-cut stones, a 2.5mm by 4mm genuine pear-cut stone, and regal beaded gold accents hugs the bottom of a high-polished solid-gold ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.