Shop for Body Jewelry

A reversible clicker with flattering curves that form a subtle point at the center, with an inlay on the front and a crosshatch texture on the back...

A 2mm by 4mm marquise-cut genuine stone is held in place by two v-prong settings and suspended from a single jump ring. Charms are made to be attac...

A stone bead is set in titanium in a minimal three-prong setting. These stones are set (not glued) to ensure the stone stays in place for the life ...

A bullet-cut stone in a simple bezel setting. Ends sized at 3mm in diameter are approximately 5mm tall, while the 4mm diameter ends measure about 6...

A classic teardrop shape with a 4mm by 6mm reverse-set Swarovski CZ and three chains for plenty of movement while you're on the dance floor! Measur...

Tiny three bead clusters sit above and below a 3mm by 4mm genuine stone held in a partial-bezel setting of solid gold. Measures 3mm by 8mm. Press-f...

A bold flame with raised, polished edges and a matte-finish, sandblasted center. 7mm by 8.5mm. Size 14g/12g will work with both 14g (1.6mm) and 12g...

Two graduating rings each accented by 1mm flush-set genuine stones make for double the fun on this solid gold clicker. The single-snap hinged closu...

A 3mm by 4mm genuine stone is held in a partial-bezel setting and accented by a single gold bead on one end. Measures 3mm by 6mm. Press-fit jewelry...

A delicate gold chain ends with a sweet little 2mm gold bead. Charms are made to be attached to other jewelry, and work well when worn on press-fit...

A solid-gold bar with a sparkling textured finish with an angular box chain dangling below. Measures approximately 2mm by 25mm. Press-fit jewelry i...

Curved edges and contrasting finishes make this diamond-shaped end look sleek and futuristic. Small measures 4.5mm at its widest point. Medium meas...

Ten tiny gold beads are paired in a rectangular shape and hold a short box chain just below. Measures approximately 2mm by 15mm. Press-fit jewelry ...

Two elegant chains suspended between jump rings each hold a solid gold bead that moves freely along its length. Accent a single piercing by slippin...

An ornate gold hoop shows off a 2mm by 4mm marquise-cut genuine stone held in a V-prong setting at the center. The single-snap hinged closure allow...

Three 2mm by 4mm marquise-cut genuine stones are held in V-prong settings and arranged in the shape of a fan. Measures 5.5mm by 9mm. Press-fit jewe...

With shimmering dichroic glass in one color on the front and another on the back, these fused and carved soda-lime glass weights show off different...

A 1.75mm prong-set genuine stone sits at the center of this design, with a tri-bead cluster holding a 1mm flush-set genuine stone at the top and a ...

A freeform solid gold shape with a square bead dangling below from a short-but-sweet chain. A piece either Skwisgaar or Toki could rock. Measures 2...

This stunning press-fit end consists of a solid-gold bar at its center with two prong-set genuine stones stacked at the top and two dangling chains...

An out-of-this-world press-fit end. Three thin gold bars radiate out from a central high-polished dome, each holding a different design: tri-bead c...

A simple ball chain dangles next to a sparkling box chain with a 1.5mm genuine stone at the bottom. Measures 2mm by 9mm. Press-fit jewelry is sold ...

A marquise-cut genuine stone is wrapped in a high-polished gold band and accented by a 1mm genuine diamond at the center. Measures 4mm by 6mm acros...

A tri bead cluster stands tall and proud holding a 1mm genuine stone set within one of the beads, while a solid gold bar swings freely below from a...