Shop for Body Jewelry

A design of pure glamor, embellished with 0.9mm pave-set gemstones on all sides for a sophisticated, textured shine. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Add fluidity and texture to your setup with a single curb chain suspended between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

An exquisite stone globe measuring approximately 1/2” attached to a sleek, high-polished hoop emanates artistic prestige. Each piece measures just over 2” across.

Two vibrant turquoise cabochons with an earth-toned matrix are wrapped in a unique silver setting and accented by clear quartz points that dangle freely below on this boho-inspired design. Each piece measures approximately 2.5” in total length and is suspended from a 14g silver clasp.

A low profile trio of high-polished titanium forms the shape of a fan. Medium measures 4mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Clear crystal quartz enhanced by long, slender inclusions of dark tourmaline. Due to the one-of-a-kind nature of these stones please expect slight variations in coloration and shape. Oval stone measures approximately 8mm by 14.5mm including the jump ring. Teardrop stone measures approximately 8mm by 14mm including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A semi-opaque, green-hued variety of chalcedony with translucent linear inclusions showcased within a solid gold band. Due to the one-of-a-kind nature of these stones please expect slight variations in coloration and shape. Oval stone measures approximately 6mm by 9.5mm including the jump ring. Asymmetric oval stone measures approximately 7mm by 10mm including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A classic ring juxtaposes subdued geometric details with a striking emerald-cut stone at the center. Cast in 316L stainless steel and ion-plated in 18k gold. Size refers to the US ring measurement system.

A classic ring featuring a reverse-set stone sits at the center of this textured portrayal of an all seeing eye. Cast in 316L stainless steel and ion-plated in 18k gold. Size refers to the US ring measurement system.

A textured matte finish brings a new take to an old classic for a more subdued look. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A seam ring is flattened on the lower portion adding a layer of dimensional elegance to a classic design. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A classic seam ring is partially flattened and adorned with a row of coarse linear texturing across the front. For a different look, wear backward to showcase the subtle matte finish on the back. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A reversible piece reminiscent of Brutalist design on the front with its roughly textured mix of linear scores and dotted stippling across the flattened portion of the ring; worn backwards, showcase the lightly textured matte finish for a more subtle look. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A time-honored design available with a flat matte finish or classic high polish. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A scored surface produces a unique texture that makes each piece one-of-a-kind. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Hammered impressions span the surface of a flat disk. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A delicate length of cable chain totes four small enamel charms for a touch of nostalgic glamor. Charms are attached with a forward-facing orientation, ideal for chains worn on a single earlobe piercing, or other similar placements. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A high-polished teardrop that can stand alone with its timeless silhouette or serve as a charming accent piece. Measures 2.5mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three 2mm by 4mm marquise-cut genuine stones, each with a graduating beaded border on one side, converge at a center gold bead creating a pinwheel of whimsical illusion. Measures approximately 8.5mm across. Press-fit jewelry is sold a s two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Big, bold, and futuristic triangular weights with a smooth wearable surface for comfortable wear. The body of the weight snaps open at the seam running throughout the weight and closes via internal magnets at the top. Each piece measures just under 2” and weighs 40 grams. Must be at least 0g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

A high-polished hoop dotted with grooves on its perimeter, both rugged and refined. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A high-polished, faceted hexagon exhibits captivating depth and shine. Measures approximately 2mm tall by 3mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished teardrop with a subtly faceted surface. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Simple prongs of solid gold hold a faceted genuine stone in a loving embrace allowing the sparkling stone to take center stage. Small measures approximately 5mm by 5.5mm. Large measures approximately 6mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.