Shop for Body Jewelry

A delicate length of cable chain totes four small enamel charms for a touch of nostalgic glamor. Charms are attached with a forward-facing orientation, ideal for chains worn on a single earlobe piercing, or other similar placements. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A high-polished teardrop that can stand alone with its timeless silhouette or serve as a charming accent piece. Measures 2.5mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three 2mm by 4mm marquise-cut genuine stones, each with a graduating beaded border on one side, converge at a center gold bead creating a pinwheel of whimsical illusion. Measures approximately 8.5mm across. Press-fit jewelry is sold a s two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Big, bold, and futuristic triangular weights with a smooth wearable surface for comfortable wear. The body of the weight snaps open at the seam running throughout the weight and closes via internal magnets at the top. Each piece measures just under 2” and weighs 40 grams. Must be at least 0g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

A high-polished hoop dotted with grooves on its perimeter, both rugged and refined. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A 1mm genuine stone sits at the center of an oval radiating with texture. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Six 1mm genuine stones encircle a 1.5mm genuine stone in this extravagant, botanical design. Measures approximately 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, faceted hexagon exhibits captivating depth and shine. Measures approximately 2mm tall by 3mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished teardrop with a subtly faceted surface. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A textured diamond-shaped design is crowned with a 2mm prong-set genuine stone. Measures approximately 3mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Simple prongs of solid gold hold a faceted genuine stone in a loving embrace allowing the sparkling stone to take center stage. Small measures approximately 5mm by 5.5mm. Large measures approximately 6mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A taut length of cable link chain for the polished punk. Measures 2mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An eight-point star holds a 1mm gemstone at its core showcasing elegance in simplicity. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three cable chains in varying lengths are suspended from a talon-set genuine stone adding movement and fluidity to this mesmerizing design. Small measures approximately 5mm by 12mm. Large measures approximately 6mm by 18mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A flattened portrayal of a 3-dimensional cube with high-polished faces and pronounced seams creates a subtle trick of the eye. Small measures approximately 3.5mm by 4mm. Large measures approximately 4.5mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished pinwheel splayed across the surface of a subtly textured dome. Both illusory and playful. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A triangular design adorned with subtle geometric accents exudes futuristic prestige. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A tapered grouping of solid gold beads in varying sizes radiates dimensional artistry. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A continuous ring made from solid 14k gold. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Suggested for well-healed piercings only.

A simple chain is transformed into a design of mesmerizing exuberance with the addition of three faceted genuine stones. Outer marquise-cut stones measures 4mm by 6mm and the center oval-cut stone measures 3mm by 3.5mm. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Circular link weights featuring a smooth inner wearable surface and a high-polish ridged outer surface with beaded teardrop side accents. Each band has a hidden hinge that snaps closed for a secure fit. Each piece measures approximately 7/8” in diameter and weighs 8 grams. Must be at least 2g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

A pretty and punk solid-gold spike suspended from a fixed jump ring. Measures approximately 7mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

An implant-grade titanium ( ASTM F136 6Al-4V ELI ) ovoid threaded end designed for comfort and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Four eye-catching enamel charms full of charismatic novelty are fixed to a length of cable chain. Charms are attached with an outward-facing orientation, ideal for chains worn across nostril piercings or other similar placements. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.