Body Jewelry

Three lengths of curb chain are suspended from a 4mm rounded triangle with stepped edges embodying geometric glamor. Measures 4mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A luminous, faceted pear holds 1mm and 1.5mm prong-set genuine stones in this modern design. Measures 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A constellation-inspired design of three pave-set 1.5mm genuine stones nestled within a solid gold triangle. Measures 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Six 1.5mm pave-set genuine stones cover the face of a formidable, high-polished triangle. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four 1.5mm genuine stones are cradled by pyramid-shaped prong settings within an opulent square. Measures 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm princess-cut genuine stone sits within a raised beaded square giving it a regal demeanor. Measures approximately 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A chunky solid gold “x” with a timeless flair. Measures 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Equal parts sweet and sophisticated, a 2mm claw-set genuine stone is accented with a 1mm solid gold bead. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Gold beads elegantly encircle a center bezel-set stone. Small holds a 2mm stone and measures 5mm overall. Large holds a 3mm stone and measures 6.5mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sleek crescent moon holds 0.25mm, 0.5mm, and 1mm genuine stones. Measures 3.5mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm genuine stone bordered on one side by staggered gold rays. Measures 6.5mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An entrancing 2mm bezel-set genuine stone rests within a beaded border from which rays of solid gold spring forth in defiance. Measures 5.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A design that exudes both elegance and versatility, featuring two 1.5mm by 3mm marquise-cut genuine stone leaves accented by a miniature tri-bead cluster. Measures 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A pair of 1.5mm by 3mm marquise-cut genuine stones with a 1.5mm stone springing forth from the center represent the beauty in new beginnings. Measures approximately 4.5mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm by 3mm marquise-cut stone is accompanied by smaller marquise-cut stones and adorned with tri-bead clusters in this elegantly tapered design. Measures 4mm by 8.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm by 4mm tapered baguette-cut genuine stone charm dangles below a 2mm triangle-cut gemstone in this polished, geometric design. Measures approximately 3.5mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A radiant curve is formed by a centered 1.5mm gemstone accentuated by smaller stones in graduating sizes. Measures 2mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm by 3mm marquise-cut stone and a complimentary marquise-cut stone with textured bezel settings rest beside a 1mm stone in a stylish disarray. Measures 3.5mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A twinkling 1.5mm gemstone decorates a simple, solid gold 2mm ball. Measures 1.5mm by 3.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two 1.5mm gemstones rest on either side of a high-polished 2mm ball. Measures approximately 2mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm by 6mm genuine stone is nestled within the grip of a winding, textured serpent as it breathes a whisper of warning. Measures approximately 4.5mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A laser-cut, solid gold kite is elevated by five 1mm genuine stones. Measures approximately 4mm by 6.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sleek, prong-set 1.5mm by 3mm marquise-cut gemstone adorns the edge of a classic seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A sleek, miniature dagger with playful enamel accents. Measures 2.5mm by 9.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.