Buddha Jewelry

A fan-shaped cluster of three 2mm by 4mm marquise-cut stones affixed to a single jump ring. Measures approximately 7mm by 8mm. Charms are made to be attached to other jewelry, and work well when worn on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 2mm by 4mm baguette-cut genuine stone held in a partial bezel setting and attached to a simple jump ring. Charms are made to be attached to other jewelry, and work well when worn on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A row of prong-set stones in graduating sizes with a tiny three-bead cluster added as an accent below the center stone. Classic and classy. Each ring has a hinged clasp for easy insertion and removal.

Three pear-cut stones form the shape of a triangle, held together with a subdued setting for subtle touches of gold. Small holds 1.5mm by 2mm stones and measures approximately 5mm across. Large holds 2mm by 3mm stones and measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A genuine stone held in a simple 4-prong setting. Elegant and classic. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A rose-cut genuine stone is held in a solid gold prong setting to create maximum sparkle as it catches the light. Each rough-cut stone is unique and may vary slightly in shape. Measures approximately 7mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Amethyst stalactite slices held in a solid brass halo design made from flattened rose-gold-plated brass hoops. Each stone slice has a rough center encircled by bands of pale blue-gray, sparkling clear crystal, and a vibrant purple edge. Each hoop has a slight curl at the end for a comfortable and secure fit. Each piece measures approximately 3” in total length and weighs 32 grams. Must be at least 7/16” to wear.

Rough quartz crystals are coated in a thin layer of titanium and anodized to create a glowing orange orb with a rainbow flash. Each is held between high-polished and sleek silver-plated white brass tapering into hooks. Each piece measures approximately 3” long and weighs 24 grams with a 14g silver hook.

The smallest of the moonstruck line, these miniature earrings feature slices of fluorite in high-polished rose-gold-plated brass with two delicate dangling chains. These mineral slices show off bands of pale gray and deep pink with translucent clear crystal. Each piece measures approximately 2” in total length and has a 16g clasp that will fit standard ear piercings.

Glowing double-terminated agate crystals dangle below solid brass hooks from free-moving brass chains. Like slices of a lemon, these stones feature touches of yellow interspersed throughout translucent quartz. Each piece measures approximately 5 ½” in total length and weighs 21 grams. Must be at least 2g to wear.

Gorgeous slices of fluorite are held in high-polished rose-gold-plated brass with two delicate matching chains dangling below. Hues of gray dominate with touches of pink and copper. Each piece measures just over 3” and weighs 32 grams, and has a 16g clasp that will fit standard ear piercings.

A central pear-cut stone is flanked by four smaller matching stones and accented by tri-bead clusters of varying sizes, all made from solid 14k gold. Each ring has a hinged clasp for easy insertion and removal.

A sleek and shining clicker made from solid 14k gold with prong-set stones graduating in size in a ring that comes to a contoured point. Each ring has a hinged clasp for easy insertion and removal.

Fit for royalty, this ornate hinged ring is made from solid 14k gold and features a row of 1mm prong-set stones framed by a beautiful gold border and tiny tri-bead clusters. Each ring has a hinged clasp for easy insertion and removal.

Like an ornate crown for your piercing, this solid gold hinged ring is a burst of sparkling gemstones. Marquise-cut stones of varying sizes are clustered together in a unique arrangement and accented by ten 1mm matching stones, all prong-set to allow for maximum brilliance. Each ring has a hinged clasp for easy insertion and removal.

A versatile double-sided clicker with a row of outward-facing 1mm prong-set gemstones. Depending on how it’s viewed, this solid gold hinged ring shows off the sparkling gemstones on its edge or the texture on its intricately carved gold face. Each ring has a hinged clasp for easy insertion and removal.

This solid gold clicker features five brilliant baguette-cut stones of varying sizes framed by three round gemstones are on either side. Each ring has a hinged clasp for easy insertion and removal.

A low-profile press-fit end with a 3mm by 4mm bezel-set pear-shaped cabochon and five floral petals. Measures 6.5mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Tiny bead details accent the base of each petal on this low-profile, high-polished sold 14k gold design. Measures 6.5mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Reminiscent of Frida Kahlo’s signature flower crowns, this regal press-fit end features a unique headdress-like design holding a bezel-set stone in solid 14k gold. Small measures approximately 6.5mm overall with a 3mm stone; large measures 8mm overall with a 1.75mm stone. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An elongated diamond shape made from solid 14k gold with layered step detail at the base and a low profile inlay. Measures 4mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A true showstopper! This press-fit end features three 2mm by 4mm marquise-cut gemstones flanked by two smaller matching stones of the same cut, and accented at the base by three 1mm round gems. All stones are prong-set in solid 14k gold on this beautiful lotus flower design. Measures 6.5mm by 10mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An ultra-low-profile end made from solid 14k gold with a high-polished finish in the shape of a lotus flower. Measures 6.5mm by 10mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

With a honeycomb-inspired design, these pieces are sure to be the buzz of every conversation! These measure approximately 2” across. Wearable surface is 12g thick.