Chains, Charms, Cuffs & Slips

A 2mm solid gold ball hangs fixed to a jump ring. Small and sweet. Measures approximately 4mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Rough-cut genuine stone teardrops are suspended from a single jump ring and faceted on all sides for maximum sparkle. Measures approximately 4mm by 11mm including the jump ring. Charms are made to be attached to other jewelry, and work well when worn on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Cable chains of varying lengths forming a waterfall of texture and movement. Graduating chain detail measures approximately 12mm at its longest point. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A pair of 3mm trillion-cut genuine stone charms and a hypnotizing, laser-cut kite charm sway from the ends of an elegant cable chain. Charms at either end of the chain range from approximately 14mm long to 19mm long including the jump ring. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A series of five 4mm bezel-set genuine stones are linked together to create a bold and glamorous chain. Chain that is 44mm holds 5 genuine stones. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 3mm by 4mm baguette-cut genuine stone dangles from a wispy length of anchor tassel chain. Measures approximately 17mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 4.5mm by 6.5mm labradorite briolette hangs from a beaded flat cable chain. Measures approximately 18mm. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 6.5mm by 25mm Montana Agate cylinder moves freely along a twisted, faceted chain that is punctuated by a flat cable chain tassel. Measures 62mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 3.5mm by 7mm marquise-cut genuine stone hangs from a rounded box chain and is paired with a length of diamond-cut singapore chain for a sleek and delicate look. Measures approximately 29mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 4mm by 8mm marquise-cut genuine stone dangles from a short wisp of rolo chain. Measures approximately 16mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 3mm by 5mm baguette-cut genuine stone and a 3mm by 6mm marquise-cut genuine stone are paired together, both dangling from a gold cable chain. Measures approximately 24mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 9mm by 12mm kite-cut genuine stone is suspended from two lengths of flat cable chain. Measures 30mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 3mm by 5mm pear-cut genuine stone suspended on an eye-catching starburst chain. Measures approximately 13mm long with chain and jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Two tightly woven, complementary lengths of curb chain elevated by a 3mmm bezel-set genuine stone tassel. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 2mm by 9mm high-polished gold bar flows from a short length of chain. Measures approximately 21mm long with the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A grand 6mm bezel-set genuine stone dangles from a petite solid gold chain. Measures 15mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 1.2mm thick cable chain is paired with a 1.2mm thick curb chain and suspended between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Two indented 3mm cubes hang from asymmetrical cable chains for a dynamic, free-spirited look. Measures approximately 29mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 2mm by 3mm tapered baguette-cut genuine stone sits within a cut-out bezel setting. Measures 13mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A solid gold, rounded triangle sits within a textured border in this striking design. Measures approximately 7mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A high-polished cross with minimalistic, linear detailing on both the front and back suspended from a delicate length of cable chain. Measures approximately 6mm by 19mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A hammered column of solid gold anchors a delicate strand of cable chain. Short measures approximately 29mm long including the jump ring. Medium measures approximately 33mm long including the jump ring. Long measures approximately 37mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A dazzling length of laser-cut cable chain combines mobility and shine. Short measures approximately 20mm long including the jump ring. Medium measures approximately 25mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A segmented wisp of faceted bead chain to dangle from your piercing. Short measures approximately 20mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.