Diablo Organics

Polished citrine points with a warm luminous glow are accented by a bezel-set rose-cut obsidian oval for an elegant pop of contrast. These semi-transparent crystals are held in a playful hammered setting and suspended from ⅝” brass saddle spreaders by an arrangement of textured brass rings. Each piece weighs approximately 50 grams and measures 4” long. Must be ⅝” to wear.

A vibrant marquise-shaped cabochon of genuine lapis is surrounded by three concentric marquise-shaped rings of brass, creating echoes of negative space around the gold-flecked stone. Each piece measures approximately 4.75” long and weighs 77 grams. Suspended from 2g brass coils.

Two fossilized ammonite shells are encased in a spiraling cage of hammered brass, echoing the distinct winding shape and naturally eroded texture of the shells. Each piece measures approximately 2.75” long and weighs 30 grams. Suspended from 8g textured brass coils.

Glimmering teardrops of genuine Laguna Agate and symmetrical beaded accents decorate the textured brass bands that envelopes two fossilized megalodon teeth, beautifully juxtaposing their natural weathered appearance. Must be at least 2g to wear. Each piece weighs approximately 49 grams and measures 3” in total length. Each shark weighed approximately 100 tons and measured up to 60’ in total length.

Solid 8g brass coils suspend fossilized megalodon teeth cradled in a two-toned hammered brass with central iridescent labradorite cabochons. Each piece weighs approximately 26 grams and measures 3” in total length. Each shark weighed approximately 100 tons and measured up to 60’ in total length.

Ornately textured brass discs with a hollow middle hang freely from large brass coils, drawing inspiration from traditional Thai design while appearing to emulate the sun in all of its fiery splendor. Must be at least 6g to wear. Each piece measures approximately 4” overall and weighs 50 grams.

A pear-cut genuine stone surrounded by a solid-gold bezel setting hangs gracefully from a length of matching cable chain, combining rich color and sparkle. Measures approximately 15mm long including jump ring. Charms are made to be attached to other jewelry, and work well when worn on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Three varied lengths of solid-gold anchor chain dangle from a bezel-set rose-cut genuine black diamond, creating a regal and eye-catching effect with movement and sparkle. Measures approximately 33mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A kite-shaped salt and pepper diamond featuring a complex web of black and white inclusions hangs within a solid-gold open-back bezel setting from a woven gold chain, resembling the very toy aircraft the cut of stone calls to mind. Measures approximately 25mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A slender shard of pointed crystal cradled in a solid gold bezel setting, dangling freely from a delicate cable chain. Stone size, shape, and color may vary. Measures between 28-31mm long including the jump ring, depending on the size of the stone. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A solid gold bezel setting below two elongated chain links encircles a striking crystal point. Stone size, shape, and color may vary. Measures between 20-24mm long including the jump ring, depending on the size of the stone. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single 5mm by 2mm marquise-cut faceted stone sits atop an ASTM F-136 titanium ring, flanked on either side by a row of 1mm inlaid faceted stones. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a secure and comfortable fit.

A length of solid gold cable chain holds a single 4mm square-cut genuine stone in a solid gold bezel setting. Measures approximately 14mm overall including the jump ring. Charms are made to be attached to other jewelry, and work well when worn on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single 5mm square-cut genuine stone in a solid gold bezel setting is suspended between two jump rings by a length of solid gold cable chain on either side. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

One central 5mm square-cut faceted genuine stone is flanked on either side by matching 4mm stones along a solid gold cable chain. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Baguette-cut faceted stones in a prong setting form a solid band of bling around an ASTM F-136 titanium ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a secure and comfortable fit.

Two concentric rows of prong-set stones create a band of sparkle and shine in this ASTM F-136 titanium ring with a single snap closure, allowing for easy opening and closing with a secure and comfortable fit.

A single row of high-polished titanium beads dot the edge of two concentric rings to add a decorative element to this ASTM F-136 implant grade titanium clicker. This ring has a single snap closure to allow for easy opening and closing, making the jewelry simple to change while allowing for a secure and comfortable fit.

This ASTM F-136 implant grade titanium ring features three tiered rows of 1mm prong-set stones, giving the illusion of multiple rings stacked into one with the ease of a single snap closure to allow for convenient insert and removal.

Titanium spokes of alternating lengths encircle a row of 1mm prong-set stones to create a sunburst effect in this ring made of ASTM F-136 implant grade titanium. The single snap-hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a secure and comfortable fit.

The edge of this ring is lined with 1mm prong-set stones adding a sparkling accent to an otherwise classic design. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a secure and comfortable fit.

A simple ring made from ASTM F-136 implant grade titanium with a single-snap hinged closure for easy opening and closing, and a secure and comfortable fit.

Three miniature cast-brass shark teeth held by varying lengths of chain dangle from 18g silver hooks made to fit standard ear piercings. Measures just over 3 ½” long.

Elegant earrings featuring two curved metal shields with a brushed finish on the front suspended from an 18g silver hook made to fit standard ear piercings. Measures just over 2” long.