Hialeah Fine Jewelry

Three tiered lengths of solid-gold Singapore chain hang suspended from two jump rings in glistening arcs. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Four solid-gold chains of varying lengths and styles hang freely from a singular jump ring to add a splash of dimension and bounce to your piercing. Measures approximately 24mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Two solid-gold chains of varying size dangle from a solid-gold jump ring, one ending in a realistic solid-gold cannabis leaf charm that is sure to take your look to a higher plane. Measures approximately 22mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A functional solid-gold safety pin hangs freely suspended from a jump ring. Charm measures approximately 34mm long, including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A seam ring holding three dangling cable chains of varied length, each ending in either a solid-gold star or crescent moon charm. Charms measure approximately 14mm at their longest point. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A high polish solid gold bar hangs suspended from a 1mm thick bead chain. Charm is soldered to the jump ring and length refers to the total measurement of charm, including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Three sparkling chains dangle freely below a 3x4mm bezel-set oval-cut genuine stone. Charm measures approximately 20mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 4x6mm genuine bezel-set brilliant-cut stone hangs suspended from a closed jump ring. Charm measures approximately 11mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single 2mm bezel-set brilliant-cut genuine stone suspended below a closed jump ring by a sleek, solid gold chain. Charm measures approximately 10mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A cannabis plant leaf with engraved details. Charm measures approximately 12mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A solid gold lightning bolt with 0.5mm pave-set genuine stones. Charm measures approximately 15mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 1mm thick rolo chain holding a 4mm by 6mm bezel-set pear-cut genuine stone dangles from a closed jump ring. Charm measures approximately 16mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 4x5mm bezel-set pear-cut genuine stone hangs from a jump ring on a single starburst chain link. Charm measures approximately 13mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Two dangling high-polish gold rectangles hang from a single closed jump ring. Charm measures approximately 15mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A solid gold dagger hangs suspended below a single link of faceted chain. Charm measures approximately 20mm long by 5mm wide. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single 2.5mm bezel-set brilliant-cut genuine stone holds three free-moving tassels below. Charm measures approximately 15mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A bezel-set brilliant-cut genuine stone is suspended from a simple jump ring. Charms with 4mm stone measure approximately 10mm long including the jump ring. Charms with 5mm stone measure approximately 12mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A high-polish, raised nautical star suspended from a jump ring. Charm measures approximately 13mm long by 10mm wide. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 1.3mm thick anchor chain holds a 2x4mm prong-set baguette-cut genuine stone. Charm measures approximately 15mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single 2mm prong-set brilliant-cut genuine stone pendant hangs suspended from a loop of chain. Charm measures approximately 15mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Three faceted 3x4mm bezel-set oval-cut genuine stones dot a 1.2mm thick gold Rolo chain. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 3mm bezel-set genuine stone hangs from a faceted 1.3mm thick Singapore tassel on a two-tiered chain of the same style. Stone tassel charm measures approximately 18mm long, however exact length may vary. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 3x6mm bezel-set marquise cut genuine stone is flanked by two 3x4mm bezel-set oval-cut stones and held together on a 1.2mm Rolo chain, creating an incandescent accent. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A single length of 1.5mm thick faceted curb chain naturally twists to create an eye-catching, refractive accent for your piercing. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.