Industrial Strength

An ultra-low profile screw-on end made of implant-grade titanium holds synthetic opal cabochons. These stones are bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A threaded ball made of implant-grade titanium holds a Swarovski crystal in a low-profile setting for maximum comfort and sparkle. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

This internally threaded curved barbell shaft is shaped like the letter “J” and made to fit anatomy where a more pronounced curve is needed. Made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.

These threaded ball ends are made of implant-grade titanium that is polished to a mirror finish and anodized yellow, for the look of gold at a fraction of the cost. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A simple and classic threaded ball end for internally threaded barbells and posts. Made of implant-grade stainless steel and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A horseshoe-shaped internally threaded barbell shaft that combines the look of a ring with the easy insertion and removal of a barbell. These circular barbells are made of implant-grade titanium ( ASTM F136 6Al-4V ELI ), polished to a mirror finish and anodized yellow. The look of gold at a fraction of the cost. Ends must be purchased separately. These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft.

Circular barbells combine the look of a ring with the easy insertion and removal of a barbell. This horseshoe-shaped internally threaded barbell shaft is made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. Ends must be purchased separately. These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft.

Brilliant Swarovski crystals are bezel-set on each end of these gemmed curved barbells. Top gem is a 3/16” removable internally threaded ball, and the bottom is a 6mm fixed ball. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made from implant-grade titanium.

Made from implant-grade titanium, these gem curves have brilliant, prong-set Swarovski crystals on each end. The bottom 6mm gem is fixed, while the 4mm top gem is internally threaded and removable. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well.

Made from implant-grade titanium, these beads are designed to snap into captive bead rings. Flat on the back, these have a single bezel-set gem on the front. Except for a limited selection of cabochons, all stones are synthetic. 2.5mm beads fit 16g and small-diameter 14g captive rings. 3mm beads fit larger-diameter 16g and small-diameter 14g captive rings. 4mm beads fit larger-diameter 14g and 12g captive rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

Septum retainers are the best option when you’re looking for something discreet. They can be worn up to hide the jewelry, or down for more visibility. Made with gently flared sides, and available in ASTM F-138 implant-grade steel.

Combining the comfort of a classic threaded ball with the look of a spike. Made of implant-grade titanium and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A threaded ball made of implant-grade stainless steel holds a sparkling Swarovski crystal. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A genuine Swarovski crystal is set (not glued) in the lower half of an internally threaded curved barbell. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. The removable top ball is 3/16” and the bottom fixed gem ball is available in 7/32” or 5/16” in size. Made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. This item is sold as a complete piece of jewelry, with a fixed bottom gem ball and removable top ball.

Five synthetic opal cabochons are prong-set in implant-grade titanium along a graceful crescent. These are especially striking in outer helix piercings, where the shape of the jewelry accentuates the curve of the ear. Small has 2.5mm, 2mm, and 1.5mm stones, and measures 10mm in length. Large has 3mm, 2.5mm, and 2mm stones, and measures 13mm in length. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Five prong-set synthetic gemstones are set along a graceful crescent in implant-grade titanium. Especially striking in outer helix piercings, where the jewelry’s shape accentuates the curve of the outer ear. Small has 2.5mm, 2mm, and 1.5mm stones, and measures 10mm in length. Large has 3mm, 2.5mm, and 2mm stones, and measures 13mm in length. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Available with three, four, or five Swarovski crystals, these 2mm gems are held in place (no glues are used) by the channel setting, to ensure the stone stays in place for the life of the jewelry. Both elegant and understated. Made from implant-grade titanium. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A three-prong setting made from implant-grade titanium holds a single Swarovski zirconia, allowing for maximum sparkle. Each faceted stone is prong set (no glues are used), to ensure the stone stays in place for the life of the jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

These rings feature five synthetic stone cabochons, graduating in size from 2mm on the outer edges, to 2.5mm and finally to 3mm in the center. Made from implant-grade titanium with a flat, hinged closure for easy insertion and removal.

A row of five faceted swarovski zirconias are the highlight of this gemmed hinge ring. A center 3mm gemstone is flanked first by two 2.5mm stones and then two 2mm outer stones. Made from implant-grade titanium with a flat, hinged closure for easy insertion and removal.

Made from implant-grade titanium, this clicker showcases a single row of synthetic opals or stone cabochons. Depending on the sizes you choose, each ring holds between 8 and 14 prong-set stones. A flat, hinged closure allows for easy insertion and removal.

A glittering hinged ring featuring a continuous row of prong-set faceted swarovski zirconias. Each ring holds between 8 and 14 gemstones depending on the size. Made from implant-grade titanium with a flat, hinged closure for easy insertion and removal.

Blacker than black, these steel eyelets have a hardened carbon coating that gives these tunnels their dark charcoal color. Single-flared eyelets include a clear silicone o-ring for a secure fit. 6g through 1" are grooved for o-rings. 8g to 5/8” eyelets have an overall length of 3/8” with a 5/16” wearspace. Eyelets sized 11/16” and above have an overall length of 1/2” with a 3/8” wearspace. Eyelets are sold individually. For a pair, choose a quantity of 2.

Made from implant-grade, ASTM F-138 steel, these eyelets are high-polished and high-quality. Each tunnel is machined from a single piece of steel for a consistent size and finish. Single-flared eyelets include a clear silicone o-ring for a secure fit. 6g through 1" are grooved for o-rings. 8g to 5/8” eyelets have an overall length of 3/8” with a 5/16” wearspace. Eyelets sized 11/16” and above have an overall length of 1/2” with a 3/8” wearspace. Eyelets are sold individually. For a pair, choose a quantity of 2.