LeRoi

An alternative to a gold bead, this flat, mirror-polished round disk sits flush to the skin. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three individual prong-set synthetic stones are clustered together to make one large, low-profile end. Small trinity has 1.5mm stones; medium trinity has 2mm stones. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

This classic design features a single synthetic stone set in a polished gold prong setting. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Inspired by the Sanskrit bindu, t his design has eight dots around a center, bezel-set 2mm synthetic stone. Measures approximately 4.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three tiny gold balls cluster together to form a triangle that shines each and every time the light hits it. Each piece measures 2mm in diameter. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A classic design, this hinged ring allows for easy opening and closing. Made from solid, high-polished 14k yellow, rose, or nickel-free palladium white gold.

Ideal for daith piercings, where the heart design can lay flat in the large open area of the conch, these continuous hearts provide all the comfort and security of regular continuous rings with an added touch of uniqueness. Made from 316LVM F-138 stainless steel.

A dramatic and opulent top-down navel curve design featuring a charm of clustered bezel-set stones and high-polished titanium beads dangling below a fixed 4mm faceted stone with delicate tri-bead accents. This curve features a decorative top fixed at one end and a removable 3/16” titanium threaded ball at the other for easy insertion and removal. Length is the measurement of the curved post between the threaded ends, not total length.

A single synthetic gem held in a smooth solid-gold bezel setting. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A celestial design featuring a high polish moon cradling a five-pointed star. Measures approximately 4mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three chains suspended from matching gold bars that are suspended between jump rings at either end. Accent a single piercing by slipping each end over one post or barbell, or wear suspended from two nearby piercings. Size refers to the thickest post size these will fit. Length refers to the distance between the outermost jump rings. Sold individually. Post or barbell not included.

Two delicate cable chains held between two jump rings. Accent a single piercing by slipping each end over one post or barbell, or wear suspended from two nearby piercings. Size refers to the thickest post size these will fit. Length refers to the distance between jump rings on the shortest of the two chains. Sold individually. Post or barbell not included.

Two different lengths of chain are suspended between jump rings with two additional dangling chains hanging on one side. Accent a single piercing by slipping each end over one post or barbell, or wear suspended from two nearby piercings. Size refers to the thickest post size these will fit. Length refers to the distance between jump rings on the shortest of the two chains. Dangling chains measure approximately 24mm long. Sold individually. Post or barbell not included.

A bezel-set stone with a three-bead cluster fixed both above and below the stone. 2.5mm and 3mm beads fit most 16g and 14g captive rings. These beads are designed to snap into captive bead rings and are sold separately from the rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

A single row of beads fixed both above and below a bezel-set stone creates a striking accent to an otherwise simple design. 2.5mm and 3mm beads fit most 16g and 14g captive rings. These beads are designed to snap into captive bead rings and are sold separately from the rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

Two clusters of three small beads are fixed on either side of a bezel-set stone. 2.5mm and 3mm beads fit most 16g and 14g captive rings. These beads are designed to snap into captive bead rings and are sold separately from the rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

A single three-bead cluster accents a bezel-set gemstone. 2.5mm and 3mm beads fit most 16g and 14g captive rings. These beads are designed to snap into captive bead rings and are sold separately from the rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

A central cluster of gemstones, with a 2.5mm stone at the center and 1.5mm stones on either side, sit between a simple row of beads on a high-polished seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A central 2.5mm bezel-set stone is flanked by two 1.5mm stones and further accented by clusters of tiny high-polished beads, all working together to create a striking arrangement along the edge of a high-polished seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A central 2mm by 4mm marquise-cut stone is flanked by two matching 1.3mm by 3mm stones and set above a 1.5mm bezel-set stone, accented by three small clusters of tiny gold beads. Measures approximately 8mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Bold and elegant. A cascading cluster of marquise-cut stones in varying sizes gracefully descend in a thoughtful fan arrangement. Measures approximately 8mm by 12.5mm. The orientation corresponds to the direction of the pointed end of the design, on the bottom. Curve will face the opposite direction when the piece is worn upside down. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Five marquise-cut stones form the shape of a fan over a single bezel-set stone and a cluster of tiny gold bead accents. A dazzling arrangement of sparkling stones set in solid gold. Measures approximately 9mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A diamond-shaped cluster of four tiny titanium beads. Measures 3mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm stone is prong-set and framed by a single border of milgrain detailing. Measures approximately 4mm by 5mm . Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.