Maya Jewelry

A 2mm by 4mm kite-cut genuine stone captured within the prongs of a low-profile gold setting. Measures approximately 3mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A rigid length of chain accented by a smaller curb chain draped below for a delightful contrast of scale and fluidity. Measures 7.5mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two 1.5mm round-cut stones and a 1.5mm by 3mm marquise-cut stone dangle freely below a mtaching 2mm by 4mm marquise-cut stone. Measures 6mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2.5mm prong-set stone sits atop a solid gold square with a millgrain border and is further accented by tri-bead clusters at each corner creating a marvel of texture and shine. Measures 7mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 3mm prong-set genuine stone accented by a 1.5mm genuine stone creates an elegant, tapered design through juxtaposition of size. Measures approximately 3.5mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Barbed wire heart-shaped earrings for the hopeless romantic. Each piece measures 1 1/2” long and has an 18g hinged clasp that will fit standard ear piercings.

Etched ferns mirror one another on either side of an elaborately textured disk, its many deep chasms and high-polish peaks mimicking the veins of a leaf. Each piece measures approximately 1 1/2” long, weighs 14 grams, and has an 18g hinged clasp that will fit standard ear piercings.

A curtain of free-flowing beaded chains taper to a point below a sleek hoop, mirroring its elongated silhouette. Each piece measures approximately 3” long and has an 18g hinged clasp that will fit standard ear piercings.

Contrasting rows of hammered gold, 1.25mm pave-set gemstones, and beaded detailing give this stunning shield-like design the appearance of multiple stacked rings, all in 14k solid gold. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Three 1mm bezel-set stones appear to breach the surface of an organically-shaped golden tablet, as if recently uncovered in an archaeological dig. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A halo of 1.25mm stones perched atop delicate tendrils of solid gold appears to burst from a central 1mm stone at the base of this glamorous disk. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Gently tapering chain links hang freely below a central hinged link in gold-plated brass, creating a freely-moving and dynamic design. Each piece measures just under 3” overall and weighs 17 grams. Must be at least 2g to wear.

Two heart-shaped padlocks featuring high shine and contrasting details in darker patinated relief. A sweet and spunky classic. Each piece measures approximately 1 ¼”overall and weighs 20 grams. Must be at least 4g to wear.

Three solid gold leaves of variegated sizes climb a curved branch, arced as if it is climbing toward the sun. Measures approximately 4mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Reminiscent of a classic coat of arms, this design consists of two solid gold swords piercing a classic high-polished heart. Measures approximately 7mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polish solid gold 8 point star delivers maximum shine, dimension, and sparkle to your look. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A low-profile leviathan cross made from solid 14k gold. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A bowed fern frond, available in both left and right orientations. Measures approximately 5mm by 2mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A floral mandala hoop featuring two dangling gold beads made in collaboration with tattooer Hannah Pixie. Each piece measures approximately 2 ½” long and weighs 13 grams, and has an 18g hinged clasp that will fit standard ear piercings.

Prong-set cubic zirconias frame the hilt of a patinaed, filigreed sword. Each piece measures approximately 3” long and has an 18g hook that will fit standard ear piercings.

A clean and simple hoop holds a bold bezel-set mookaite cabochon at its center. The stone is slightly translucent and takes on a subtle glow when held to the light. Each piece measures approximately 3” overall and weighs 25 grams. Must be at least 4g to wear.

Barbed-wire hoops for the elegantly edgy. Each piece measures just under 2” across and has an 18g post that will fit standard ear piercings.

A structured design of granulated beads and clean lines, named after Ruth Bader Ginsburg and her elegant collars. Each piece measures just under 2” across and has an 18g post that will fit standard ear piercings.

Nearly twelve inches long, this simple design allows for free movement of dangling chains. Simply glamorous. Each piece measures just under 12” long and has an 18g post that will fit standard ear piercings.