New Arrivals

A trio of high-polished bars dangle from a single jump ring for eye-catching movement. Measures approximately 19mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 2.5mm genuine stone held in a talon-like prong setting is accented by a trio of 1mm stones above and a freely moving 1.5mm stone below. Measures approximately 10mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Equal parts sweet and sophisticated, a 2mm claw-set genuine stone is accented with a 1mm solid gold bead. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Gold beads elegantly encircle a center bezel-set stone. Small holds a 2mm stone and measures 5mm overall. Large holds a 3mm stone and measures 6.5mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sleek crescent moon holds 0.25mm, 0.5mm, and 1mm genuine stones. Measures 3.5mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three 1.5mm by 3mm marquise beads add a sweet accent to a sweeping length of cable chain. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A 3mm trillion-cut genuine stone carrying three free-moving marquise beads embodies glamor and balance. Measures 10.5mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 2mm genuine stone bordered on one side by staggered gold rays. Measures 6.5mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An entrancing 2mm bezel-set genuine stone rests within a beaded border from which rays of solid gold spring forth in defiance. Measures 5.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A design that exudes both elegance and versatility, featuring two 1.5mm by 3mm marquise-cut genuine stone leaves accented by a miniature tri-bead cluster. Measures 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A pair of 1.5mm by 3mm marquise-cut genuine stones with a 1.5mm stone springing forth from the center represent the beauty in new beginnings. Measures approximately 4.5mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm by 4mm tapered baguette-cut genuine stone charm dangles below a 2mm triangle-cut gemstone in this polished, geometric design. Measures approximately 3.5mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2.5mm by 4mm triangle-cut genuine stone is framed by solid gold in this Art-Deco-inspired design. Measures 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm by 3mm marquise-cut stone and a complimentary marquise-cut stone with textured bezel settings rest beside a 1mm stone in a stylish disarray. Measures 3.5mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A twinkling 1.5mm gemstone decorates a simple, solid gold 2mm ball. Measures 1.5mm by 3.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two 1.5mm gemstones rest on either side of a high-polished 2mm ball. Measures approximately 2mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm by 6mm genuine stone is nestled within the grip of a winding, textured serpent as it breathes a whisper of warning. Measures approximately 4.5mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A laser-cut, solid gold kite is elevated by five 1mm genuine stones. Measures approximately 4mm by 6.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sleek, prong-set 1.5mm by 3mm marquise-cut gemstone adorns the edge of a classic seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A sleek, miniature dagger with playful enamel accents. Measures 2.5mm by 9.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, fragmented sword with a dangling blade charm. The miniature, revised version of the signature press-fit end from Pupil Hall . Measures approximately 3.5mm by 13.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm prong-set genuine stone elevates a short length of hefty box chain. Measures approximately 2mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sturdy box chain enhanced by a 2mm genuine stone is paired with a string of three luminous 2.5mm beads for added contrast. Measures approximately 5mm by 12mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A strand of five 2.5mm beads is paired with a box chain and cable chain hybrid in this asymmetrical statement piece. Measures approximately 5mm by 15mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.