Pupil Hall

Reminiscent of the rock cairns found off to the sides of hiking trails (and just as delightful), this charm features an arrangement of brightly colored stone beads suspended from a jump ring by a solid gold cable chain. Measures approximately 30mm long. Due to the handmade nature of this design, each charm includes a unique mixture of genuine lapis, tsavorite, and green opal stones . Stone selection, color, and size varies per piece, so please expect a range of variations when ordering. The genuine green opals in this piece may be subject to shifts in tone over time from daily wear and exposure to heat, moisture, and chemicals. This is considered part of the natural life cycle of the genuine stone. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A brightly colored enamel bead sits at the center of a cable chain that dangles freely from a solid gold seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Simple and sweet, three 1mm bezel-set genuine stones are clustered together forming the shape of a triangle. Measures approximately 3mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A “splatter” of gold with a sandblasted finish. Measures approximately 4.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A whimsical asymmetrical design featuring a shimmering sandblasted gold finish with three 1mm prong-set genuine stones. Measures 4 x 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A playful design featuring a 1.5mm prong-set genuine stone with two textured gold accents. Measures approximately 3mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A dazzling post/ring hybrid with three 1mm genuine stones prong-set in gold along a matching box chain. Size refers to the thickness of the post. This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post.

Three gold beads are stacked atop one another and hold a single 1mm flush-set genuine stone for just a touch of sparkle. Measures 1mm by 3mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Big and bold, this press-fit end features a hexagonal genuine stone reverse-set (with the table on the bottom) in a simple prong setting. Measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A trillion-cut genuine stone is reverse-set (with the table on the bottom) and wrapped in three gold prongs. Measures 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 9-bead cluster with three 1mm flush-set genuine stones enhanced with an attached length of chain that can be worn wrapped around a single piercing or connected to another piercing. This design is further elevated by three dangling charms of gold bead clusters, each with matching stone accents. End measures 3mm by 4.5mm and the chain measures approximately 38mm long. This press-fit end can be worn in any 18g, 16g, or 14g press-fit post, but the jump ring on the end of the chain fits only on 18g or 16g jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A classic design with a twist, featuring a 1mm genuine stone flush set within one of the gold bead details. Measures 2.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

With a pattern of 1mm prong-set genuine stones along the outer edge, this clicker will add a special touch when worn in ear cartilage piercings, earlobes, or nostril piercings. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Eight 1mm genuine stones are prong-set in a random pattern across one side of a solid gold clicker. Elegant and unique. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

For a little extra flash, a solid gold chip chain is suspended below a high-polished seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A 1.5mm bezel-set genuine stone slowly “drips” from a solid gold dome. Measures 4mm long. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Angles abound on this solid gold elongated polyhedron. One side has a matte finish while the others are high-polished. Measures 2mm by 3.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A pointed pyramid with a matte finish on two sides and a high-polished finish on the other. Measures 3mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A rough-finished flat rectangle is accented by a small high-polished gold bead at one end. Measures 3mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A small high-polished dome sits at the center of a flat disk with a textured finish. Measures 3mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished bead with a miniature solid-gold ring through its center is attached to a half hoop that hugs the exterior of the lobe. A simple, yet dynamic creation that pays homage to a throwback press–fit end from Pupil Hall. Sold individually, for a pair select a quantity of 2. This style of ring makes for easy insertion and removal, so be sure to check that it is securely in place during wear. Due to the easily removable nature of this design, it is not recommended for long term wear.

A faceted stone bead hangs on a delicate cable chain adding texture and depth to this solid gold seam ring. For this design, stone selection, color, and size varies per piece, so please expect a range of variations when ordering. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A faceted bead chain sits beside an elegant cable chain in this charming, asymmetrical design. Measures 2mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An avant-garde spin on a classic heart adorned with two 1mm genuine stones and a delicate arc of cable chain. Measures approximately 6mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.