Pupil Hall

Designed with daith piercings in mind, a 1mm genuine stone is fixed to the upper portion of this ring. As if that wasn’t enough, a short length of chain is suspended at an angle within the ring, holding its own matching 1.5mm genuine stone as well. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Designed with daith piercings in mind, a 1.5mm and 1mm genuine stone dangle from the top of this ring, adding an element of surprise with movement and sparkle to this solid gold ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Delivering major bling, this press-fit end holds three 1.75mm genuine stones in simple prong settings within a solid gold bar. A chain drapes elegantly below for an extra touch of fun. Measures 5mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An asymmetrical design holding two 1mm genuine stones with a small length of chain suspended just below for added movement. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A little deco and a little daring, this press-fit end features two gold bar charms suspended from a collection of small gold rings and attached to a diamond-shaped high-polished flat end. Measures approximately 25mm long. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 5mm high-polished flat disc holds two dangling charms and an arrangement of tiny gold rings that hang freely below. Measures approximately 20mm long. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A glistening cable chain drapes elegantly below a thin box chain, with both suspended between two jump rings. Accent a single piercing by slipping each end over one post or barbell, or wear suspended from two nearby piercings. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A low profile square cluster of four 1mm bezel-set genuine stones. Measures approximately 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An elegant cable chain holds three sparkling raw stone beads and is attached to a matching gold seam ring. Stones are genuine and measure approximately 1.5mm each. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A 1.5mm bezel-set genuine stone and a simple gold bar hang freely below a jump ring on a delicate chain. Measures approximately 30mm long. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A dazzling combination of genuine stones, solid gold jump rings, and dangling chains come together on this mesmerizing press-fit end. Measures approximately 30mm long, with 1mm and 1.5mm stones. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A flexible cable suspended from a gold press-fit post holds a string of raw diamonds and sapphires. Each piece features a unique assortment of raw stones, so stone colors vary and no two rings are identical. The shaft is a press-fit post with an attached beaded cable . To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post.

A simple and elegant ball chain holds five genuine sparkling raw gem beads and is attached to a matching gold seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Three sandblasted daisies in graduating sizes, each holding its own prong-set genuine stone, are attached to one another with a single jump ring. Fun, floral, and free moving. Decorative end measures 6 x 15mm. This threaded stud is sold as a complete piece: it includes the decorative front end and the straight threaded post backing. This style of threaded jewelry is not compatible with other threaded jewelry available from our store.

Part threader earring and part charm accent, this piece is worn on two separate nearby piercings: Use the solid gold bar to thread the length of chain through an existing piercing and attach the jump ring to a post near the first. This piece holds two 1.5mm stones, each held in an open bezel setting allowing light to pass through. Left orientation means the stones face forward when the piece is laid flat with the charm positioned on the left. Right orientation means the stones face forward when the piece is laid flat with the charm positioned on the right. Due to the versatile options for wear, regardless of the direction orientation chosen, this design can be worn on either the left or right ear depending on how it’s worn in your piercings. Threader piece including the gold bar measures approximately 60mm long and fits standard ear piercings. Size refers to the thickest post size the jump ring will fit.

Sweet and simple, a 1.5mm bezel-set stone is held between two different but complementary chains that end with jump rings. This piece is designed to be worn suspended between two nearby piercings. Size refers to the thickest post size these will fit. Post/barbell not included.

Two intertwined gold bars twist and dance as part of this high-polished hinged ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A winding and asymmetrical gold ring with a hinged post for easy insertion and removal. Diameter refers to the wearable space within the design, not the length on the hinged post. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A zig-zagging gold ring holds an assortment of small genuine stones. Wear facing forward to showcase the sparkling stones or wear backwards to display the simple textured and winding gold ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A true wheel of wonder, this clicker is made from square stock formed into a perfect circle. The outer edge is sandblasted and adorned with a series of prong-set genuine stones that sit atop the surface on all sides. This ring is made to be worn in stretched piercings that are at least 10g or larger, as it requires space around the piercing in order to be worn comfortably. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug fit.

One half of this sandblasted solid gold ring holds four channel-set genuine stones, with the other half showing off a simple textured finish. A hinge is located at the center of the design dividing the piece into two distinct sides. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A perfectly balanced design featuring a 1.5mm prong-set genuine stone at the center with radiating textured gold bars above and a little droplet of solid gold dangling freely below. Measures 4 x 6.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A small but sparkling 1.5mm prong-set genuine stone sits within a concave floral shell of textured gold. Measures approximately 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Subtle sparkle shines throughout this press-fit end, with a sandblasted gold finish and prong-set genuine stones of varying sizes sprinkled throughout. Measures 4 x 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.