Pupil Hall

An amorphous high-polished gold shape holds a dangling 1mm prong-set genuine stone with a tiny gold bead accent. Measures 4.5 x 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sandblasted gold bar with a dangling 1.5mm and 1mm prong-set genuine stone below. Measures 1.5 wide by 8mm long. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A tight-knit curb chain with a jump ring at one end is attached to a high-polished 2.5mm solid gold dome with a 1.5mm bezel-set genuine stone. Wear the chain wrapped around a single piercing like a dangling ring or connect it to other jewelry in a nearby piercing. This press-fit end can be worn in any 18g, 16g, or 14g press-fit post, but the jump ring on the end of the chain fits only on 16g (or thinner) jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two genuine stones measuring 1mm and 1.5mm are held in a minimal prong setting with an attached cable chain. Wear the chain wrapped around a single piercing like a dangling ring or connect it to other jewelry in a nearby piercing. This press-fit end can be worn in any 18g, 16g, or 14g press-fit post, but the jump ring on the end of the chain fits only on 16g (or thinner) jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A pear-cut genuine stone is reverse-set (with the table on the bottom) and accented by three small beads on the top and bottom of the design. Measures 4mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 6mm gold bar holds a row of four 1mm genuine stones set into tiny gold balls at the center, all with a 2mm bezel-set matching stone dangling just below. A cable chain hangs just to the left, and a box chain to the right, with both flanked by an asymmetrical pair of ball chains on either end. Measures 6mm by 15mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm prong-set genuine stone is suspended below a jump ring by a box chain. Measures approximately 10mm long. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

An ever-so-slightly seductive set of lips and tongue made from solid gold. Measures 6.5mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two graduating rings each accented by 1mm flush-set genuine stones make for double the fun on this solid gold clicker. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A 1.75mm prong-set genuine stone sits at the center of this design, with a tri-bead cluster holding a 1mm flush-set genuine stone at the top and a dangling anchor and ball chain with an attached bar below. Measures 23mm long. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A freeform solid gold shape with a square bead dangling below from a short-but-sweet chain. A piece either Skwisgaar or Toki could rock . Measures 2.5mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

This stunning press-fit end consists of a solid-gold bar at its center with two prong-set genuine stones stacked at the top and two dangling chains below, each holding a solid gold bar. Stones measure 1.25mm and 1.5mm. Measures approximately 4mm by 30mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An out-of-this-world press-fit end. Three thin gold bars radiate out from a central high-polished dome, each holding a different design: tri-bead clusters in complementary shapes extend from two, while a free-moving charm holding a 1.5mm bezel-set genuine stone dangles from the third. To top it off, each tri-bead cluster has a tiny 1mm genuine stone flush-set in one of the beads for a touch of subtle splendor. Measures 6mm by 12mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A simple ball chain dangles next to a sparkling box chain with a 1.5mm genuine stone at the bottom. Measures 2mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A marquise-cut genuine stone is wrapped in a high-polished gold band and accented by a 1mm genuine diamond at the center. Measures 4mm by 6mm across, and approximately 3.5mm tall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A tri bead cluster stands tall and proud holding a 1mm genuine stone set within one of the beads, while a solid gold bar swings freely below from a combination anchor and ball chain. Measures 23mm long. Jewelry slips are made to be “slipped” behind a press-fit or threaded end and worn as a decorative accent. To ensure a comfortable and secure fit, make sure there is enough length on the post to fit the extra piece of jewelry, and also be sure that the front end is large enough to hold the slip in place. Choose a slip in the size that corresponds to the post it will be worn on.

Bead clusters radiate outward while a solid gold bar hangs gracefully below from a matching gold chain. Two 1mm genuine stones are set within one of the gold beads for added sparkle. Measures 25mm long. Jewelry slips are made to be “slipped” behind a press-fit or threaded end and worn as a decorative accent. To ensure a comfortable and secure fit, make sure there is enough length on the post to fit the extra piece of jewelry, and also be sure that the front end is large enough to hold the slip in place. Choose a slip in the size that corresponds to the post it will be worn on.

A 1mm bezel-set genuine stone sits at the center of a textured disk with chain border and is connected to a longer length of chain. Wear the chain wrapped around a single piercing like a dangling ring, or connect it to other jewelry in a nearby piercing. Measures 4mm across. This press-fit end can be worn in any 18g, 16g, or 14g press-fit post, but the jump ring on the end of the chain fits only on 16g (or thinner) jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sparkling box chain sprinkled with 1.5mm prong-set genuine stones. This chain is designed to be worn suspended between two nearby piercings. Size refers to the thickest post size these will fit. Post/barbell not included.

The smaller version of Pupil Hall’s Crystalized press-fit end, this variation features a 2.5mm by 5mm marquise-cut genuine stone secured with the table on the bottom and held in place by a solid gold band. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three varying lengths of dangling chain hold a short studded bar, all suspended below a jump ring. Measures approximately 19mm long. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A partially open ring with an attached thin chain that threads through a jump ring fixed to the other end of the ring to hold it in place when worn. This style of ring makes for easy insertion and removal, so be sure to check that it is securely in place during wear.

Come to the dark side with the sinister sister of the original Joy Wonder. This ring features the same sparkling row of 1mm genuine stones, but this time with the contrast turned up by adding a wash of rhodium plating behind the setting. Stones of varying colors create an ombré effect on this darkly elegant design. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Subtle angles and a row of tiny sparkling flush-set genuine stones make up this graceful, angular ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.