Pupil Hall

A dazzling piece featuring a flurry of sparkling genuine stones sprinkled across the top of a 3mm princess-cut stone that peeks out from below, adding a simple subtlety to an abundantly luxurious design. The decorative end measures 3mm by 6mm across and 3mm tall. This threaded stud is sold as a complete piece: it includes the decorative front end and the straight threaded post backing. This style of threaded jewelry is not compatible with other threaded jewelry available in our store.

Three gold bars are suspended by a delicate chain below a single jump ring. Five 1mm gems sit in partial bezel settings atop the bars and catch the eye as they sparkle with the movement of this dangling charm. Approximately 35mm long. Charms are made to be attached to other jewelry, and work well when worn on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Three 1mm genuine stones are flush-set into a solid-gold, high-polished ring. Quietly elegant. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A shimmering gold shield with a textured finish and subtle pattern of rays emanating from the center opening. Measures 5mm by 8mm. Jewelry slips are made to be “slipped” behind a press-fit or threaded end and worn as a decorative accent. To ensure a comfortable and secure fit, make sure there is enough length on the post to fit the extra piece of jewelry, and also be sure that the front end is large enough to hold the slip in place. Choose a slip in the size that corresponds to the post it will be worn on.

Like a piece of raw gold, tiny and rough and meant to be treasured. Measures approximately 2mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An abstract and asymmetrical floral design made to frame a press-fit end. Jewelry slips are made to be “slipped” behind a press-fit or threaded end and worn as a decorative accent. To ensure a comfortable and secure fit, make sure there is enough length on the post to fit the extra piece of jewelry, and also be sure that the front end is large enough to hold the slip in place. Choose a slip in the size that corresponds to the post it will be worn on.

Bezel-set 1.5mm genuine stones are suspended below a high-polished clicker and framed within a scalloped gold border. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A rough-finished, elongated gold nugget as a press-fit end. Measures 1mm by 3mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Find your way with this sculptural press-fit end reminiscent of a cairn, a stack of rocks carefully balanced on one another and commonly seen on hiking trails. Measures 3mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An extra-long charm with a simple high-polished bar suspended from a jump ring by a delicate gold chain. Medium: measures approximately 50mm in total length. Charms are made to be attached to other jewelry, and work well when worn on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Two 10mm high-polished bars are connected by a simple but sparkling chain. This piece can be worn through a single piercing, with either end dangling below, or through two neighboring piercings for a connected, spiral effect. Measures just over 80mm long and fits standard ear piercings.

A simple seam ring morphs into a freeform design creating a moment of sculptural beauty. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Big and bold, this press-fit end is modeled after the Gayer-Anderson cat, an ancient Egyptian statue that depicted the cat deity Bastet. This feline form has three piercings of its own: one through each ear and one through the nose, each adorned with a ring. Measures 5.5mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An elongated teardrop adorned with gold beads of varying sizes and accented by a small chain that hangs from a jump ring at one end. A playful work of art. Measures 3mm by 10mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two half-hoops are connected by a simple ball-chain, to be worn in two neighboring piercings. A thin chain with an attached gold bar dangles from one end, while a 1.5mm bezel-set genuine stone sits suspended from the other. Size 1/4" has approximately 16mm of chain between the half hoops, and can be worn in piercings that are no more than 6.5mm apart. Size 9/32” has approximately 19mm of chain between the half hoops, and can be worn in piercings that are no more than 8mm apart.

A 4-bead cluster with a 1mm flush-set genuine stone dangles below a matching 6-bead triangle, followed by a length of chain that can be worn wrapped around a single piercing or connected to another piercing. End measures approximately 3mm across and the chain measures approximately 20mm long. This press-fit end can be worn in any 18g, 16g, or 14g press-fit post, but the jump ring on the end of the chain fits only on 18g or 16g jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A cluster of gold beads in the shape of a triangle, with two 1mm flush set genuine stones. Measures 3mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 4mm genuine stone is held by a unique prong setting featuring an added chain harness fixed to the front. The stone is reverse-set, with the gold ring accent over the culet. Big and bold, this piece measures 5mm across and 4mm tall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three-bead accents add a little extra flair to a simple gold chain. Accent a single piercing by slipping each end over one post or barbell, or wear suspended from two nearby piercings. Chains over 30mm in length will have two groups of bead accents on either end; chains under 30mm will have one group at the center. Sold as a single chain. Size refers to the thickest post size these will fit. Barbell not included.

A dazzling arrangement of gold rings featuring a twisted knot at the center accented by two simple charms dangling from either side. Perfect for a well-dressed nipple piercing, but can be worn anywhere. Sold as a pair. Size refers to the thickest post size these will fit. Barbell not included.

A simple gold cable chain held between two jump rings. Accent a single piercing by slipping each end over one post or barbell, or wear suspended from two nearby piercings. Sold as a single chain. Size refers to the thickest post size these will fit. Barbell not included.

A thin chain with three gold beads at its center is suspended between two jump rings to create a cascading gold accent when worn. Classic and classy. Perfect for nipple piercings, but can be worn anywhere. Sold as a pair. Size refers to the thickest post size these will fit. Barbell not included.

A high-polished dome press-fit end transforms from simple to spectacular with the addition of a chain. Wear the chain wrapped around a single piercing like a dangling ring or connect it to other jewelry in a nearby piercing. This press-fit end can be worn in any 18g, 16g, or 14g press-fit post, but the jump ring on the end of the chain fits only on 18g jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A patchwork of open cut-outs uses negative space and asymmetry to create a compelling and strangely organic pattern. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.