Quetzalli

A coarsely textured square emulating the appearance of the glistening earth in solid gold. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A captivating strobe of laser-cut rays fans across a classic solid-gold square. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A smoothly ridged surface texture elevates this classic square in solid gold. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A classic disk elevated by bright stippling creating pockets of light that dance across the textured landscape of the design. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

High-polished divots grace the surface of a solid-gold disk, echoing the dappled surface of a body of water. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A chunky half-circle design ingrained with a unique patina of greens and browns and highlighted by high-polished copper detailing. Each piece measures approximately 3” by 4 7/8” and weighs approximately 63 grams, with 14-gauge titanium hinged clasps.

Lush patches of patinaed red and brown over bright copper set this bold half-circle design apart from the rest. Each piece measures approximately 2” by 2 7/8” and weighs approximately 28 grams, with 14-gauge titanium hinged clasps.

A bold half-circle of copper featuring a rich surface treatment of patinaed greens and browns. Each piece measures approximately 2” by 2 7/8”and weighs approximately 28 grams, with 14-gauge titanium hinged clasps.

A playful swirl of lazer-cut beams lends a textural twist to a classic shape in solid gold. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A faceted genuine stone clutched within a solid-gold prong-setting that provides an optimal view of the lustrous natural stone. Measures approximately 6mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A rectangular genuine stone cradled in a belt of solid gold fixed to a single jump ring. Stone size, shape, and color may vary. Medium measures between 10-12mm long including the jump ring, depending on size of stone. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single marquise-cut genuine stone cradled within a v-prong setting made from solid gold. Measures 4mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An asymmetrical masterpiece consisting of a wearable arc of gleaming solid gold holding a genuine Herkimer diamond and a dazzling length of box chain. Measures approximately 40mm long. Stone size, shape, and color may vary. This style of ring makes for easy insertion and removal, so be sure to check that it is securely in place during wear.

A hollow faceted bead of solid-gold echoing a classic disco ball hangs suspended along a length of box chain between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Three shimmering lengths of solid-gold box chains draped elegantly between two jump rings, perfect for dressing up any healed piercing. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Two glistening lengths of solid-gold box chain anchored between gold jump rings emanate refinement and class. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A raw and refined design consisting of a luminous faceted Herkimer diamond held in a solid-gold prong setting. Small measures approximately 5mm. Medium measures approximately 7mm. Large measures over 10mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two parallel chains made up of faceted gold beads form a belt of textural shine between two solid-gold jump rings. Size refers to the thickest post these will fit. Each end of the chain is soldered to a closed jump ring. Length refers to the measurement of the chains, excluding the jump rings. Sold as a single chain. Barbell not included.

A solid-gold arc of lightly textured geometric planes draws the light for an elegant and eye-catching glint of shine. The single-snap hinged closure allows for easy opening and closing and makes this jewelry simple to change, all while allowing for a snug and comfortable fit.

A slim tear drop shape of patinaed greens and browns accented on the edges with bright high-polish swathes of copper. Each piece measures approximately 2 ½” long and weighs approximately 25 grams, with 14-gauge titanium hinged clasps.

A teardrop-shaped earring with bright high polish copper edges surrounding a patinaed red and brown face. Each piece measures approximately 2 ½” long and weighs approximately 25 grams, with 14-gauge titanium hinged clasps.

A gradient of 1mm by 3mm marquise-cut genuine stones in a solid gold V-prong setting hangs vertically from a solid gold jump ring. Measures approximately 20mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A solid gold ring dotted by a single 2mm princess-cut genuine stone set in solid gold prongs. This design is outward-facing, making it perfect for nostril, rook, and select outer ear piercings. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A 2mm by 3mm marquise-cut genuine stone encased in a V-prong setting atop a solid gold ring. This design is outward-facing, making it perfect for nostril, rook, and select outer ear piercings. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.