Rings & Clickers

A simple ring made from ASTM F-136 implant grade titanium with a single-snap hinged closure for easy opening and closing, and a secure and comfortable fit.

Alternating round-cut and baguette-cut stones are set along the edge of a solid gold ring and accented by touches of gold from their simple prong settings. Each ring has a hinged clasp for easy insertion and removal.

A 2.5mm by 4mm pear-cut stone in subtle prong settings is flanked by a dazzling row of faceted 1mm stones along the edge of a solid gold ring. Each ring has a hinged clasp for easy insertion and removal.

A curved branch is fixed on top of a solid gold continuous ring. Branch is oriented in a counterclockwise direction when curved to the left and in a clockwise direction when curved to the right. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

An elegant cable chain holds three sparkling raw stone beads and is attached to a matching gold seam ring. Stones are genuine and measure approximately 1.5mm each. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A flexible cable suspended from a gold press-fit post holds a string of raw diamonds and sapphires. Each piece features a unique assortment of raw stones, so stone colors vary and no two rings are identical. The shaft is a press-fit post with an attached beaded cable . To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post.

A simple and elegant ball chain holds five genuine sparkling raw gem beads and is attached to a matching gold seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A delicately curved antler design forms the lower half of this solid gold seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Two intertwined gold bars twist and dance as part of this high-polished hinged ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A winding and asymmetrical gold ring with a hinged post for easy insertion and removal. Diameter refers to the wearable space within the design, not the length on the hinged post. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A zig-zagging gold ring holds an assortment of small genuine stones. Wear facing forward to showcase the sparkling stones or wear backwards to display the simple textured and winding gold ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A true wheel of wonder, this clicker is made from square stock formed into a perfect circle. The outer edge is sandblasted and adorned with a series of prong-set genuine stones that sit atop the surface on all sides. This ring is made to be worn in stretched piercings that are at least 10g or larger, as it requires space around the piercing in order to be worn comfortably. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug fit.

One half of this sandblasted solid gold ring holds four channel-set genuine stones, with the other half showing off a simple textured finish. A hinge is located at the center of the design dividing the piece into two distinct sides. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Made for mixed-metal fans, this design brings together three solid 14k rose, white, and yellow gold rings in graduating sizes, with a mesmerizing textured finish on one side and a smooth high-polished surface on the other. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

This simple geometric design features a negative space within a tapered “V” silhouette. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A classic design made from solid 14k gold, this hoop features five bezel-set synthetic stones each surrounded by millgrain detail and accented by a tiny cluster of beads below. Stones measure 2.5mm, 2mm and 1.5mm. Each ring has a hinged clasp for easy insertion and removal.

A solid gold seam ring dazzles with five 1mm outward-facing stones prong-set in a row along the edge. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A bezel-set stone with a three-bead cluster fixed both above and below the stone. 2.5mm and 3mm beads fit most 16g and 14g captive rings. These beads are designed to snap into captive bead rings and are sold separately from the rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

A single row of beads fixed both above and below a bezel-set stone creates a striking accent to an otherwise simple design. 2.5mm and 3mm beads fit most 16g and 14g captive rings. These beads are designed to snap into captive bead rings and are sold separately from the rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

Two clusters of three small beads are fixed on either side of a bezel-set stone. 2.5mm and 3mm beads fit most 16g and 14g captive rings. These beads are designed to snap into captive bead rings and are sold separately from the rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

A single three-bead cluster accents a bezel-set gemstone. 2.5mm and 3mm beads fit most 16g and 14g captive rings. These beads are designed to snap into captive bead rings and are sold separately from the rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

A central cluster of gemstones, with a 2.5mm stone at the center and 1.5mm stones on either side, sit between a simple row of beads on a high-polished seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A central 2.5mm bezel-set stone is flanked by two 1.5mm stones and further accented by clusters of tiny high-polished beads, all working together to create a striking arrangement along the edge of a high-polished seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Three 2mm by 4mm marquise-cut genuine stones form a fan and are fixed to a matching seam ring. This design is outward-facing, making it perfect for nostril, rook, and select outer ear piercings. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.