Sacred Symbols

A burst of solid gold spokes highlight the shine of a 1.5mm prong-set genuine stone that sits atop this subtle cross. Measures 4mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm prong-set genuine stone sits atop a textured diamond shape that appears as if it is being mined from the depths of the earth. Measures 3mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm by 3mm prong-set pear-cut stone accentuated by gold milgrain beading and a gold tri-bead cluster. Measures 4mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four 3mm by 1mm tapered baguette stones surround a larger 4mm by 2mm stone of the same variety, creating a slight arc of prong-set stones that emulate the rays of the sun. Measures 5mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A fanned out cluster of two 3mm by 4mm tapered baguette-cut genuine stones surrounding a center 4mm by 2mm marquise-cut stone, all prong-set in solid gold. Measures 5.5mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 4mm by 5mm prong-set pear-cut genuine stone fixed to a jump ring creates a subtle yet sophisticated addition to your piercing. Measures 5mm by 9.5mm including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 2mm by 4mm marquise-cut genuine stone is prong-set in solid gold and attached to a jump ring. Measures 2.5mm by 9mm including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 5mm by 3mm prong-set tapered baguette stone is accentuated on either end by gold bead clusters, exuding effortlessness and sophistication. Measures 3mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A genuine pear-cut faceted stone is wrapped in a solid 14k gold setting and suspended from a high-polished 14k gold seam ring by a matching chain. Measures just over 1 ½” in total length and handcrafted in Mexico. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A smooth finish on the wearable surface blends into the textured lower portion of this seam ring. For a different look, turn it around to show the high-polished back. Handcrafted in Mexico. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A regal hinged ring with three tiers of textured detail creating a beautiful collar design wearable in septum or ear piercings. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

High-polished solid gold bars alternate with hammered disks to surround a center 2mm bezel-set genuine diamond. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Curved, gold petals like a lotus flower surround a central 2mm bezel-set stone. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Small gold petals surround a central 2.5mm bezel-set stone on this delicate flower press-fit end. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

This 5mm disk with textured edges has a 2mm bezel-set stone and is fixed to a high-polished 14k gold ring. This outer-facing fixed bead ring is ideal for nostril, outer ear, or rook piercings. This style of ring must be bent for insertion or removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Named after the Sun Spider, this hinged ring has ten posts surrounding a 2mm center stone. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

This fixed bead ring is adorned by a 3mm bezel-set stone. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

An elegant, art deco-inspired pear shape adorns a fixed bead ring. This style of ring must be bent for insertion or removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A uniquely shaped septum clicker with a 3mm by 5mm marquise cut red tourmaline stone. Prong-set in 14k yellow gold with a hinged closure to allow for easy insertion and removal. Measures 16g in thickness with a 1/4" inner diameter.

Three prong-set faceted stones on a gold seam ring with beaded detail. A center 2.5mm stone is surrounded by a pair of 2mm prong-set stones. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A perfect starburst design with eight rays extending from a center bead. Measures 6mm at its widest point. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four diamond-shaped clusters form a larger diamond design with intricate millgrain edges. Measures 6mm at its widest point. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Tiny beaded detail graduating in size atop a gold seam ring. Handcrafted in Mexico. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A sleek design, the double-bar seam ring has a smooth finish, is lightweight, and perfect for any look. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.