Tether Jewelry

Faceted framed points segment and meet in a perfect center. A sterling silver clasp allows for easy insertion and a secure fit. Will fit standard ear piercings.

Pockets of open space dot the body of these earrings, adding dimension and light to a classic shape. A sterling silver clasp allows for easy insertion and a secure fit. Will fit standard ear piercings.

Continuous rows of faceted shapes mimic the flash of crystals. Each lightweight band has a hidden hinge that clicks closed for a secure fit. Each piece measures approximately 1” in diameter and weighs 10 grams. Must be at least 00g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

Inspired by the South African flower named after the shape-shifting Greek sea god, Proteus. Electric petals radiate out to catch light and create movement. Both the large and small versions have a 16-gauge clasp that will fit standard ear piercings. Small measures approximately 1” across. Large measures approximately 2” across. Cast in stainless steel, these are sturdy and nonreactive when worn. Available in “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plated over yellow-PVD-coated stainless steel. Online orders of Protea earrings come shipped in their own exclusive, super-fancy box!

A single line weaves around each crystal segment for a design that is both attractive and engaging. This ring has a hinged clasp for easy insertion and removal. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

Two indented 3mm cubes hang from asymmetrical cable chains for a dynamic, free-spirited look. Measures approximately 29mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 2mm by 3mm tapered baguette-cut genuine stone sits within a cut-out bezel setting. Measures 13mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A solid gold, rounded triangle sits within a textured border in this striking design. Measures approximately 7mm long including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A jagged perimeter of solid gold points combines ferocity and elegance in a single design. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

An abundance of miniature, solid gold beads layered upon one another come to a subtly tapered point. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A sandblasted chevron with softened edges creates a polished, structural design. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Delicate lines and artful stippling detail this rounded chevron design. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A wide burst of rays stretch across an elongated face of solid gold. Measures approximately 2.5mm by 12mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Inspired by the mythical creatures that would lure sailors into the sea, high-polished rays emanate from a simple hoop, mimicking a siren’s song and the waves where they lurk. Each piece measures just over 1 ½” and has a 18g clasp.

The M Theory is often said to be the leading candidate for the theory behind our universe and introduces the concept of spacetime consisting of 11 dimensions. These eleven dimensions are represented by an accumulation of interconnected monoliths in this sleek, avant-garde hoop. Each piece measures just over 1 ½” and has an 18g clasp.

Panels of intricate geometric patterns adorn these circular weights. Each band has a smooth wearable surface inside for comfortable wear and a hidden hinge that snaps closed for a secure fit. Each piece measures just under 1” and weighs 6 grams. Must be at least 2g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

A single hinged ring holds a fused stack of lightly-textured bands elevated by a diamond-shaped cut-out at its center. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Geometric elements and negative space combine on this sleek design, resembling a playful cluster of honeycomb. Measures approximately 5mm tall and 5mm wide. Sold individually. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post or press-fit barbell shaft for your end.

A 1mm genuine stone sits at the center of an oval radiating with texture. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Six 1mm genuine stones encircle a 1.5mm genuine stone in this extravagant, botanical design. Measures approximately 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A textured diamond-shaped design is crowned with a 2mm prong-set genuine stone. Measures approximately 3mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A triangular shield with a 2mm prong-set genuine stone and a millgrain border emits archaic refinement. Measures approximately 4mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three matching lengths of 1mm cable chain hang suspended from a solid-gold jump ring, perfect for adding a dramatic flair to any existing piercing. Measures approximately 14mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single length of solid-gold box chain dangling from a fixed jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.