NeoMetal

A timeless essential machined from implant-grade titanium (ASTM F136 6Al-4V ELI), polished to a mirror finish, and anodized golden yellow for the look of gold at a fraction of the cost. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

The basic end for any Neometal press-fit post. Just like their shafts, these are machined from a solid piece of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A classic high-polished ball with a countersink made for NeoMetal’s Straight Press-fit Barbell Shafts. Machined from a solid piece of ASTM F136 implant-grade titanium and polished to a mirror finish. Sold individually. These press-fit ends have a recess to ensure a tight fit with press-fit barbell shafts of the same gauge . Press-fit ends and barbells are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding press-fit barbell shaft for your end.

The vibrant color of your favorite stone cabochon truly stands out as it rests flat against your skin supported by a thin outer band of titanium. Just like their shafts, these settings are machined from a solid piece of implant-grade titanium (ASTM F136 6Al-4V ELI). Natural and synthetic cabochons are bezel set (no glues are used), to ensure the stone stays in place for the life of the jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A smooth titanium cup securely surrounds your favorite faceted gemstone. Just like their shafts, these settings are machined from a solid piece of implant-grade titanium (ASTM F136 6Al-4V ELI). Natural and synthetic cabochons are bezel set (no glues are used), to ensure the stone stays in place for the life of the jewelry. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A press-fit curved barbell made from implant-grade titanium and polished to a mirror finish. These curves are anodized “golden yellow” for the appearance of gold at a fraction of the cost. Each post comes with one ⅛” (3mm) ball attached on one end. Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the removable end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post.

NeoMetal’s threadless, press-fit posts are machined from a solid piece of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. 16g posts come with one attached ⅛” (3mm) ball. Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the removable end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post.

A curved barbell machined from implant-grade titanium, polished to a mirror finish, and anodized golden yellow. Two Swarovski CZ’s or cabochon gems are bezel set in each end, without the use of glues, ensuring the security of the gem for the life of the jewelry. This product is sold as a complete piece , and includes one attached end and one removable end, each holding a side-set 2.5mm stone.

Neometal’s threadless, press-fit posts are machined from implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Swarovski CZs or cabochon gems are bezel set into each end (no glues are used), to ensure the stones stay in place for the life of the jewelry. This product is sold as a complete piece , and includes one attached end and one removable end, each holding a side-set 2.5mm stone.

Five 1.5mm faceted gemstones surround a 2mm disk to create this low-profile but radiant flower. These are machined from a solid piece of implant-grade titanium and polished to a mirror finish. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sweet and simple heart machined from implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Ultra-flat high-polished disks are a striking jewelry option for anyone who wants their jewelry to be noticed without the added sparkle of gemstones or the height of a full ball. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A flat crescent moon made from implant grade titanium (ASTM F136 6Al-4V ELI). Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Neometal’s threadless, press-fit posts are machined from a solid piece of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. Each post comes with one attached 5/32” (4mm) disk. Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post.

A timeless and eye-catching genuine diamond nestled in a solid gold prong setting. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Each faceted gemstone end gets maximum light exposure, for maximum sparkle, thanks to a subtle-yet-secure four prong titanium setting. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Natural and synthetic cabochon stones are bezel-set (not glued) in a smooth cup of titanium to ensure the stone stays in place for the life of the jewelry. Just like their shafts, these settings are machined from a solid piece of ASTM F136 implant-grade titanium. Sold individually. These press-fit ends have a recess to ensure a tight fit with press-fit barbell shafts of the same gauge . Press-fit ends and barbells are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding press-fit barbell shaft for your end.

A faceted gemstone is bezel-set (not glued) in a smooth cup of titanium to ensure the stone stays in place for the life of the jewelry. Just like their shafts, these settings are machined from a solid piece of ASTM F136 implant-grade titanium. Sold individually. These press-fit ends have a recess to ensure a tight fit with press-fit barbell shafts of the same gauge . Press-fit ends and barbells are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding press-fit barbell shaft for your end.

Small but tough spears machined from a solid piece of implant-grade titanium (ASTM F136 6Al-4V ELI). Small measures 3/32” at its base and approximately 3mm tall; Large measures 1/8” at its base and approximately 4mm tall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

NeoMetal’s threadless, press-fit barbells are machined from a solid piece of ASTM F136 implant-grade titanium and polished to a mirror finish. Great for nipple piercings and bridge piercings. Ends must be purchased separately. These straight barbell shafts have a small hole on both ends that is made to securely hold press-fit ends. Press-fit ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding press-fit ends for your straight barbell shaft.

NeoMetal’s threadless, press-fit posts are machined from a solid piece of implant-grade titanium (ASTM F136 6Al-4V ELI) and polished to a mirror finish. 18g posts come with either one attached 3/32” (2.5mm) ball or 3/32” (2.5mm) disk. 16g posts come with one attached ⅛” (3mm) ball. For 16g press-fit posts with disk ends, shop NeoMetal press-fit labret posts . Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post.

An extremely subtle jewelry choice, these textured ends sit flat against your skin, do not reflect light, and are available in colors that compliment most skin tones. A fantastic option when you do not want to draw too much attention to your piercing or when want to disguise it as a freckle or mole. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A low-profile triangle machined from implant grade titanium (ASTM F136 6Al-4V ELI) makes for a sleek design. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Uniquely shaped for maximum sparkle, three individual 1.5mm prong-set stones are clustered together to show off a 4mm low-profile sparkling surface. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.