Buddha Jewelry

A 2.5mm by 5mm genuine stone is accented on one side by four 1mm gemstones leading to a matching 1.5mm by 2mm pear-cut stone. Measures 4mm by 8.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Pale gray double-terminated smoky quartz points show off swirled inclusions and are suspended within a flattened rose-gold-plated brass hoop. Each hoop terminates with a slight curl at the end for a secure fit. Each piece measures approximately 3” from top to bottom and weighs 22 grams. Must be at least 00g to wear.

An enchanting interpretation of a spider with a 1.2mm gemstone as the head and a 2mm by 3mm stone making up the body. Measures 6.5mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A twinkling 1.5mm gemstone decorates a simple, solid gold 2mm ball. Measures 1.5mm by 3.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A laser-cut heart with a 1.5mm gemstone at its center and a spiked beaded border for the tough but tender heart. Measures 7mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A realistic, yet whimsical depiction of a bee complete with a 1mm gemstone head and a 2mm by 3mm gemstone body. Measures 6mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A row of gemstones in subtly graduating sizes (1mm, 1.3mm, and 1.5mm) line the side of a solid gold ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A simple and clean design featuring a square-cut stone held between two v-prong settings. Small holds a 2mm stone and measures approximately 3mm across. Large holds a 3mm stone and measures approximately 4mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An instant classic, this end has a 2mm princess-cut synthetic stone held in an elegant bar setting. Measures 2mm by 3mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two 1.5mm gemstones rest on either side of a high-polished 2mm ball. Measures approximately 2mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2 x 3mm oval-cut stone is prong-set in solid gold and accented by a 1mm matching stone below. Measures 2mm by 4.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An elegant 2 x 4mm baguette-cut synthetic stone is held in place in a bar setting, all with a tiny three-bead cluster accent. Measures 2mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A sleek teardrop design available in two sizes, with a central pear-cut gemstone bezel-set in solid gold and framed by a larger teardrop border. Small measures 6mm overall with a 2mm by 3mm stone; large measures 8mm overall with a 3mm by 4mm stone. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An asymmetrically-cut faceted genuine stone is accented by four 0.8mm stones and held in solid gold by subtle prong settings. Measures 4mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two 2mm by 4mm pear-cut gemstones are flanked by two 1.5mm round faceted gems on either side. All stones are prong-set in solid 14k gold. Measures 5mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm by 6mm genuine stone is nestled within the grip of a winding, textured serpent as it breathes a whisper of warning. Measures approximately 4.5mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Showstopping slices of fluorite move from a creamy translucent mocha into shades of gray, ending in sparkling white rough crystal edges. Each stone slice is encased in a high-polished yellow-gold-plated brass hoop, and each hoop has a slight curl at the end for a comfortable and secure fit. Each piece measures approximately 2 ½” across and weighs 44 grams. Must be at least 00g gauge to wear.

A laser-cut, solid gold kite is elevated by five 1mm genuine stones. Measures approximately 4mm by 6.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 1.5mm by 3mm marquise-cut stone and a complimentary marquise-cut stone with textured bezel settings rest beside a 1mm stone in a stylish disarray. Measures 3.5mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2.5mm by 4mm triangle-cut genuine stone is framed by solid gold in this Art-Deco-inspired design. Measures 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A pinwheeling surface texture of laser-cut rays elevates this simple disk to another dimension. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Double-sided, ornately cast spade-shaped weights. Elegant and sumptuous. Each piece weighs 36 grams and measures 1” x 1 1/2”. Must be at least 1” to wear.

A fragmented arrow adorned with 0.9mm, 1mm, and 1.2mm gemstones connected by a delicate length of cable chain embodies fluidity and whimsy. Measures 3.5mm by 22.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Opalized pieces of petrified wood framed by high-polished hoops. With hues ranging from deep sea green to vibrant teal, each stone slice has its own character. Each piece measures approximately 1 ½” in diameter and has a 16g clasp that will fit standard ear piercings.