Industrial Strength

A simple and classic threaded ball end for internally threaded barbells and posts. Made of implant-grade stainless steel and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

These threaded ball ends are made of implant-grade titanium that is polished to a mirror finish and anodized yellow, for the look of gold at a fraction of the cost. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An internally threaded gemmed curved barbell with Swarovski crystals held in smooth bezel-settings. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium.

Synthetic opal cabochons are held in a smooth bezel setting and sit at either end of this internally threaded curved barbell. The top 4mm stone is removable and the bottom 6mm stone is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium.

Smooth bezel settings hold matching synthetic opal cabochon stones on this internally threaded curved barbell. The top 4mm stone is removable, and the bottom 6mm stone holds a matching 4mm dangle and is fixed to the barbell shaft. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made of implant-grade titanium.

Brilliant Swarovski crystals are bezel-set on each end of these gemmed curved barbells. Top gem is a 3/16” removable internally threaded ball, and the bottom is a 6mm fixed ball. Length is the measurement between the stones, not total length. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. Made from implant-grade titanium.

Made from implant-grade titanium, these beads are designed to snap into captive bead rings. Flat on the back, these have a single bezel-set gem on the front. Except for a limited selection of cabochons, all stones are synthetic. 2.5mm beads fit 16g and small-diameter 14g captive rings. 3mm beads fit larger-diameter 16g and small-diameter 14g captive rings. 4mm beads fit larger-diameter 14g and 12g captive rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.

Circular barbells combine the look of a ring with the easy insertion and removal of a barbell. This horseshoe-shaped internally threaded barbell shaft is made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. Ends must be purchased separately. These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft.

A horseshoe-shaped internally threaded barbell shaft that combines the look of a ring with the easy insertion and removal of a barbell. These circular barbells are made of implant-grade titanium ( ASTM F136 6Al-4V ELI ), polished to a mirror finish and anodized yellow. The look of gold at a fraction of the cost. Ends must be purchased separately. These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft.

A horseshoe-shaped internally threaded barbell shaft made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Combining the look of a ring with the easy insertion and removal of a barbell. Ends must be purchased separately. These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft.

A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A conical spike made for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A curved internally threaded barbell shaft, made of implant-grade stainless steel (ASTM F-138 316LVM) polished to a mirror finish. Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.

An implant-grade titanium (ASTM F136 6Al-4V ELI) internally threaded curved barbell shaft is anodized yellow, giving it the look of gold at a fraction of the cost. Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.

This internally threaded curved barbell shaft is made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here !

An internally threaded ball made of implant-grade titanium (ASTM F136 6Al-4V ELI) anodized gold holds a bezel-set brilliant Swarovski crystal. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A threaded ball made of implant-grade titanium holds a Swarovski crystal in a low-profile setting for maximum comfort and sparkle. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A flat foil-backed gem is bezel-set (not glued) in implant grade titanium for an ultra-low profile look. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A flat foil-backed stone bezel-set in implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow for the appearance of gold at a fraction of the price. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An ultra-low profile setting made of implant-grade titanium with a flat foil-backed gem with brilliant shine and reflection. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An ultra-low profile screw-on end made of implant-grade titanium holds synthetic opal cabochons. These stones are bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A smooth synthetic stone cabochon in a super-low-profile setting made of implant-grade titanium. These stones are bezel-set (not glued), to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.