Tether Jewelry

A high-polished dome with a delicate millgrain border. Measures approximately 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Hinged ovoid weights featuring raised intricate fractal lines and a smooth inner wearable surface for comfortable all-day wear. Each piece measures approximately 1 ⅝” in diameter and weighs 25 grams. Must be at least 00g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

Crisscrossing lines form a lattice-like pattern reminiscent of sun rays on the horizon. The name is an homage to Aurora, the goddess of dawn in Roman mythology and the one who announces the arrival of the sun each day. A sterling silver clasp allows for easy insertion and a secure fit. Will fit standard ear piercings.

Opposite but complementary surfaces fit together in a soft curve representing the cycles of Yin and Yang, one side textured and rough, the other smooth and high-polished. Measures 3mm by 4.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An intricately detailed shield of solid gold featuring a raised gold bead in the center and a single length of solid-gold cable chain dangling below. Measures approximately 3mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two teardrops of solid gold, one textured and one smooth, converge into an elegant curve adorned by a cable chain tassel. Measures approximately 3mm by 14mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Solid-gold rays burst from a central raised solid-gold diamond shape, creating a luminous fan effect. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A single line weaves around each crystal segment for a design that is both attractive and engaging. This ring has a hinged clasp for easy insertion and removal. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

Eight 1mm prong-set genuine stones surround a 4mm genuine stone cabochon held in a solid-gold prong setting. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A single 5mm square-cut genuine stone nestled within four solid-gold corner prongs. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A textured solid gold band circles a single 3mm prong-set genuine stone creating an airy, geometric setting that highlights the stone using negative space. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A single 3mm prong-set genuine stone is encircled by gold millgrain with a subtle geometric motif. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished hoop dotted with grooves on its perimeter, both rugged and refined. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A single 1mm genuine stone encircled in a solid-gold bezel setting hangs from a lightly engraved solid-gold hexagon by a single jump ring. Measures approximately 3mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, faceted hexagon exhibits captivating depth and shine. Measures approximately 2mm tall by 3mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished teardrop with a subtly faceted surface. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A classic ring featuring a reverse-set stone sits at the center of this textured portrayal of an all seeing eye. Cast in 316L stainless steel and ion-plated in 18k gold. Size refers to the US ring measurement system.

Faceted framed points segment and meet in a perfect center. A sterling silver clasp allows for easy insertion and a secure fit. Will fit standard ear piercings.

Pockets of open space dot the body of these earrings, adding dimension and light to a classic shape. A sterling silver clasp allows for easy insertion and a secure fit. Will fit standard ear piercings.

Faceted, lightly textured faces make up the outer surface of these rounded weights, with a smooth wearable surface inside for comfortable wear. Each band has a hidden hinge that snaps closed for a secure fit. Each piece measures approximately 1” in diameter and weighs 16 grams. Must be at least 00g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

Continuous rows of faceted shapes mimic the flash of crystals. Each lightweight band has a hidden hinge that clicks closed for a secure fit. Each piece measures approximately 1” in diameter and weighs 10 grams. Must be at least 00g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

Inspired by the South African flower named after the shape-shifting Greek sea god, Proteus. Electric petals radiate out to catch light and create movement. Both the large and small versions have a 16-gauge clasp that will fit standard ear piercings. Small measures approximately 1” across. Large measures approximately 2” across. Cast in stainless steel, these are sturdy and nonreactive when worn. Available in “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plated over yellow-PVD-coated stainless steel. Online orders of Protea earrings come shipped in their own exclusive, super-fancy box!

A pretty and punk solid-gold spike suspended from a fixed jump ring. Measures approximately 7mm long including jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A high-polish chevron with rounded edges featuring etched rays and a hinged clasp for easy insertion and removal. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.