14g (1.6mm)

A dynamic 3mm genuine stone charm is suspended from two 2.5mm solid gold beads. Measures 3mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A refined pairing of a 1.5mm round-cut genuine stone and a 2.5mm reverse-set genuine stone accented by a draped cable chain. Measures approximately 5.5mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A 2mm by 4mm marquise-cut stone is surrounded by rays of solid gold in this regal piece. Measures approximately 5.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, scalloped shell with a serene air. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Graduating 1mm, 1.5mm, and 2mm gemstones sit along an elongated triangle with beaded detailing. Measures 3mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A mischievous, solid gold die cut in half (for those who are tired of playing games). Measures approximately 2.5mm tall and 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Solid gold leaves spring forth from a curved vine. Measures approximately 5mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm by 4mm marquise-cut genuine stone is nestled between two brilliant clusters of three 1mm genuine stones. Measures 4mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A vibrant marquise-cut gemstone is held within the miniature teeth of a scalloped bezel setting. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A new interpretation of the classic pair of cherries. Measures 6mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A kite-shaped genuine stone in a high-polished gold bezel setting. Measures 2.5mm tall and 4mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A dramatic floral design with an intricate beaded border around the edge of each concave petal. Measures 5.5mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A small but mighty elegantly detailed rendering of an aquatic cephalopod fossil in solid gold. Measures approximately 4mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A raised central dome holds seven 0.75mm genuine stones surrounded by a ring of textured gold. Measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A cluster of seven prong-set genuine stones sits at the center of a stippled ring of textured gold. Measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A recessed, hammered disk ringed by a halo of 0.5mm pave-set, genuine stones. Measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A recessed, stippled surface is surrounded by a textured perimeter in this striking press-fit end. Measures 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A simple triangle with a rough surface recessed inside a textured border. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A halo of 1.5mm gemstone petals surrounds a central 2mm bezel-set stone in this classic flower. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A grouping of four marquise-cut gemstones set on an ever-so-slight curve. Mini holds 1.5mm by 3mm stones and measures approximately 8mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three prong-set stones are arranged in a gentle curve. Mini holds 1.5mm stones and measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, implant-grade titanium disk for a simple and versatile design. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A larger prong-set stone with a smaller stone accent makes for an elegant, simple design. Mini holds a 1.5mm and 2mm stone. Measures approximately 4mm overall. Medium holds a 2mm and 2.5mm stone. Measures approximately 5mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.