BVLA

Six tiny gold 1.25mm beads are stacked together to form a shimmering triangle. Measures approximately 3.5mm in overall diameter. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A center 1.5mm bezel-set genuine stone encircled by two rings and tiny beaded accents. Overall diameter measures 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm by 4mm baguette-cut genuine stone is set on a classic solid 14k gold continuous ring. An extra special touch for an extra special ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A 2mm by 4mm marquise-cut genuine stone is prong set in solid 14k gold with graduating beaded accents on either side. Measures 4mm by 5mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Gold beads elegantly encircle a center bezel-set stone. Small holds a 2mm stone and measures 5mm overall. Large holds a 3mm stone and measures 6.5mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Seven 1.5mm prong-set genuine stones sit atop a sleek solid-gold ring in an eye-catching, elegant arc. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A pair of 1.5mm by 3mm marquise-cut genuine stones with a 1.5mm stone springing forth from the center represent the beauty in new beginnings. Measures approximately 4.5mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A single genuine stone cradled in an elegant and solid-gold double-clawed prong setting. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

With a low-profile and smooth, high-polished gold surface this cross really shines. Measures approximately 6mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A curved press-fit barbell shaft made from solid gold and tapped on both sides for press-fit ends, perfect for mixing and matching. These curved barbell shafts have a small hole on both ends that is made to securely hold press-fit ends. Press-fit ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding press-fit ends for your straight barbell shaft.

True Harry Potter fans will instantly identify the Elder Wand, the Cloak of Invisibility, and the Resurrection stone, all represented in this solid gold design. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A fluid gold swirl accented by graduated gold beads make for a unique, lively design. Measures approximately 7.5mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end

A symmetrical row of two 2mm genuine round-cut stones, a 2.5mm by 4mm genuine pear-cut stone, and regal beaded gold accents hugs the bottom of a high-polished solid-gold ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A trio of 1.5mm and 2mm gemstones bookended by subtle faux wire wrap detailing. A strikingly detailed design in solid 14k gold. When selecting stones from the dropdown the central stone is listed first and accent stones are listed second. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

However you wear it, this charming feather will perfectly complement your piercing. Measures 10mm by 3mm. The curve direction of each end always flows with the feather’s point, on the bottom. Curve will face the opposite direction when the piece is worn upside down. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Solid 14k gold hoop with a small cast feather attached. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Every piece of hand-crafted jewelry from Body Vision Los Angeles is guaranteed for life.

Modern yet timeless, representing the infinite cycle. Measures 7mm at its widest point. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Genuine 1.5mm and 2mm prong-set faceted or cabochon stones form a petite, tapered column. Measures 4mm by 2mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three 1.5mm solid gold beads form a straight line on this simple design. Measures 1.5mm by 5mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm genuine stone bordered on one side by staggered gold rays. Measures 6.5mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An entrancing 2mm bezel-set genuine stone rests within a beaded border from which rays of solid gold spring forth in defiance. Measures 5.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm bezel-set genuine stone is flanked by four sets of tiny tri-bead clusters giving this end the appearance of a bright and bold starburst. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

This classic, solid 14k gold hoop is accented with tiny beads and an elegant faux wire wrap. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. Every piece of hand-crafted jewelry from Body Vision Los Angeles is guaranteed for life.

A classic design that allows for easy insertion and removal, these nostril nail hoops have an attached prong-set cubic zirconia on one end to hold the ring in place. The attached clear CZ stones can be as small as 1.5mm or larger.