14g (1.6mm)

An emerald-cut stone in a basket setting is fixed to a solid gold curved barbell with a matching prong-set stone on top. The bottom 6mm by 8mm gem ...

A 6mm princess-cut stone held in a basket setting is fixed to a solid gold curved barbell with a matching prong-set stone on top. The bottom 6mm ge...

An ever-so-slightly seductive set of lips and tongue made from solid gold. Measures 6.5mm by 8mm. Press-fit jewelry is sold as two separate pieces:...

An ultra-low-profile prong-set stone. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached...

A bezel-set stone with a three-bead cluster fixed both above and below the stone. 2.5mm and 3mm beads fit most 16g and 14g captive rings.   These b...

A single row of beads fixed both above and below a bezel-set stone creates a striking accent to an otherwise simple design. 2.5mm and 3mm beads fit...

Two clusters of three small beads are fixed on either side of a bezel-set stone. 2.5mm and 3mm beads fit most 16g and 14g captive rings.   These be...

A single three-bead cluster accents a bezel-set gemstone. 2.5mm and 3mm beads fit most 16g and 14g captive rings.   These beads are designed to sna...

A central cluster of gemstones, with a 2.5mm stone at the center and 1.5mm stones on either side, sit between a simple row of beads on a high-polis...

Three 2mm bezel-set stones run along the edge of a high-polished seam ring with three-bead clusters fixed next to, and below, each stone.  This sty...

A central 2.5mm bezel-set stone is flanked by two 1.5mm stones and further accented by clusters of tiny high-polished beads, all working together t...

A high-polished titanium seam ring with a row of three-bead clusters along the lower edge.  This style of ring must be bent for insertion and remov...

Five small tassels form the shape of a fan and are suspended below a brass shield by a chain of matching jump rings. These eye-catching pieces are ...

The mini version of their larger namesake, these earrings feature two pieces of contrasting brass held together by small jump rings that allow for ...

A 3mm trillion-cut genuine stone is accented by three 1.5mm stones. Prong settings add just a touch of gold while allowing each stone to shine. Mea...

Subtle prong settings hold a dazzling 3mm trillion-cut genuine stone with a row of smaller stone accents fanning out below. Accent stones measure 1...

Two 2mm princess-cut genuine stones are prong-set next to one another in solid gold. Measures 2.5mm by 5mm. Press-fit jewelry is sold as two separa...

Two 2mm by 4mm marquise-cut genuine stones are clustered together with a 2.5mm princess-cut stone. All gems are held by simple prong settings for a...

A stone bead is set in titanium in a minimal three-prong setting. These stones are set (not glued) to ensure the stone stays in place for the life ...

A bullet-cut stone in a simple bezel setting. Ends sized at 3mm in diameter are approximately 5mm tall, while the 4mm diameter ends measure about 6...

A classic teardrop shape with a 4mm by 6mm reverse-set Swarovski CZ and three chains for plenty of movement while you're on the dance floor! Measur...

Tiny three bead clusters sit above and below a 3mm by 4mm genuine stone held in a partial-bezel setting of solid gold. Measures 3mm by 8mm. Press-f...

A bold flame with raised, polished edges and a matte-finish, sandblasted center. 7mm by 8.5mm. Size 14g/12g will work with both 14g (1.6mm) and 12g...

A 3mm by 4mm genuine stone is held in a partial-bezel setting and accented by a single gold bead on one end. Measures 3mm by 6mm. Press-fit jewelry...