BVLA

A 2mm bezel-set genuine stone surrounded by a crown of solid gold beads in varying sizes. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

The Wu-Tang Clan’s inimitable logo with raised, polished edges and a sandblasted center. Measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An ultra-low-profile prong-set stone. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three 1.5mm genuine stones are prong-set in solid gold and suspended from a matching jump ring. Measures 1.75mm by 8.5mm, including the jump ring. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A 3mm trillion-cut genuine stone is accented by three 1.5mm stones. Prong settings add just a touch of gold while allowing each stone to shine. Measures 4mm by 6.5mm. Size 14g/12g will work with both 14g (1.6mm) and 12g (2mm) internally threaded barbell shafts and posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Subtle prong settings hold a dazzling 3mm trillion-cut genuine stone with a row of smaller stone accents fanning out below. Accent stones measure 1.5mm, 1.25mm, and 1mm. Total size measures 6mm across. Size 14g/12g will work with both 14g (1.6mm) and 12g (2mm) internally threaded barbell shafts and posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A bold flame with raised, polished edges and a matte-finish, sandblasted center. 7mm by 8.5mm. Size 14g/12g will work with both 14g (1.6mm) and 12g (2mm) internally threaded barbell shafts and posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A realistic seashell holds a 1.5mm genuine stone. Sweet and petite. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 4mm brilliantly faceted genuine stone is prong set in solid gold and surrounded by a border of tiny milgrain detail. Measures approximately 6mm across and 4mm tall. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A coiled serpent with the markings of a diamondback rattlesnake shown in tiny carved details. Measures 7mm by 9mm. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A 2.5mm by 4mm pear-cut genuine stone is accented by three 1.25mm genuine stones. Each gem is bezel set in solid gold, and tri-bead clusters peek out at the top and bottom of this design. Measures 5mm by 8mm. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A center 2.5mm by 4mm pear-cut genuine stone is surrounded by three 1.25mm bezel-set genuine stones and tiny gold beads. Measures 7mm across. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Four 2.5mm by 4mm pear-cut genuine stones take center stage on this bold threaded end. Each stone is prong-set and surrounds a tiny gold bead center. Measures 10mm at its widest point. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A striking and bold design showcasing 2mm and 1mm genuine stones bezel set in solid gold and accented with ornate beaded details. Measures 6mm by 9mm. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Covered in a medley of triangular facets on top, these rose-cut cabochons catch the light inside a low-profile 14k gold bezel setting. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A smooth stone cabochon set in a low-profile 14k gold bezel setting. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four 1.5mm prong-set genuine stones form the shape of a diamond. Measures approximately 4mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A simple solid 14k gold continuous ring gets even classier by adding a tiny outward-facing 1.5mm by 3mm marquise-cut genuine stone. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Solid 14k gold in the shape of a teardrop with a high-polished finish. Measures 2mm by 3mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Both elegant and bold, each showcasing a 3mm by 5mm bezel-set pear-cut genuine stone. Measures 4mm wide by 6mm long. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

The Flower of Life is a geometric pattern with a long history, from sacred geometry to study by alchemists and even the sketches of Leonardo da Vinci. Made of solid 14k gold. Small measures 4mm across. Medium measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Five intricately carved petals form a floral cup in this classic flower design. Measures 4.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four genuine stones are bezel-set in solid 14k gold making a diamond-shaped cluster. Small clusters have 1.25mm stones and measure approximately 4mm by 5.5mm wide; medium clusters have 1.5mm stones and measures approximately 4.5mm by 6mm wide. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A trio of prong-set 1.5 x 3mm marquise-cut genuine stones form the shape of a fan, ready to dazzle. Measures 4mm tall by 6mm long. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.