Hanging Designs & Weights

Pale gray double-terminated smoky quartz points show off swirled inclusions and are suspended within a flattened rose-gold-plated brass hoop. Each hoop terminates with a slight curl at the end for a secure fit. Each piece measures approximately 3” from top to bottom and weighs 22 grams. Must be at least 00g to wear.

Cut from the same slice of banded agate, these pieces show off a beautiful linear design of contrasting black and white stripes across smooth stone cabochons. With a faceted black obsidian accent above and a smooth black obsidian cabochon teardrop below, these weights are both edgy and elegant. Each piece measures approximately 3 ½” in length, weighs 16 grams and is suspended by an 8g brass coil.

Brilliant prong-set stones are set on the ends of high-polished brass crescent hoops. Measures just under 2 ½” from the bottom of the teardrop to the top of the hoop. Wearable surface is 8g.

Three plates of alternating hammered brass and copper are held together by brass jump rings and suspended from a sterling silver hooked clasp. Each piece measures approximately 2” in total length and has a sterling silver 14-gauge clasp hook.

Two raw geodes are dipped in titanium and anodized to transform them into a vibrant rainbow of purples, blues, and greens. Traditionally, the sparkling center of a geode is the main attraction, but these unique pieces feature a brilliant finish on the smooth outer surface. Each geode is bezel-set in brass and framed by hammered brass shields that hang below matching brass crossover hooks. Each piece measures approximately 4” in total length, weighs 20 grams, and is suspended by a 6g crossover hook.

Showstopping slices of fluorite move from a creamy translucent mocha into shades of gray, ending in sparkling white rough crystal edges. Each stone slice is encased in a high-polished yellow-gold-plated brass hoop, and each hoop has a slight curl at the end for a comfortable and secure fit. Each piece measures approximately 2 ½” across and weighs 44 grams. Must be at least 00g gauge to wear.

These textured saddle spreader weights have three chains suspended across the center, with a design made to hug the lower half of the lobe for a comfortable and secure fit.

Carved quartz arrowheads are electroplated in gold and suspended from brass crossover hooks by a dangling chain of jump rings. Each piece measures approximately 4” long, weighs 20 grams, and is suspended by a 6g crossover hook.

In geology, the matrix is a material in which something is embedded, like the rough, natural rock that holds a sparkling crystal, or in this case the goethite that holds the layer of chrysoprase. Bright mint green chrysoprase is framed by rich brown goethite that shows the natural rough texture of the stone. Each piece is wrapped in an electroplated gold border and suspended from brass hooks by brass jump rings. Each piece measures approximately 4 ½” in total length, weighs 25 grams, and is suspended by a 6g crossover hook.

Creamy ripples of white accent swirls of magenta, purple and deep indigo on these complimentary vibrant slices of dyed agate. Each piece of agate is electroplated in yellow gold around the edge and is suspended from brass crossover hooks by a striking brass chain, leaving the back open to allow light to pass through and illuminate the stone. Each piece measures just under 4” in total length, weighs 14 grams, and is suspended by a 4g crossover hook.

A labradorite cabochon is faceted on its domed top, creating a mesmerizing blend of reflected light and a glowing blue-green sheen. Each stone is bezel-set within a hammered brass shield suspended from brass hooks by doubled-up high-polished jump rings. Each piece measures approximately 5” in total length, weighs 42 grams, and is suspended by a 0g crossover hook.

A new take on the classic ovoid design, these weights are inspired by bone marrow and living cells with contrasting patterns of black and white. These limited-edition weights are made from upcycled materials, giving new life to waste by using discarded materials in new products. Because each pair is made from a mix of materials, what may appear to be a simple black and white design can transform into a glowing blue beauty when held to the light, so look closely for hidden surprises. These are unique pieces that will not be duplicated, from a limited run of 50 pairs. Small weights measure approximately 1 ½” tall and weigh 16 grams. Must be at least ½” to wear. Medium weights measure approximately 2” tall and weigh 38 grams. Must be at least 9/16” to wear.

Horseshoe-shaped weights with an all-over hammered finish. This innovative design is made to hug the lower half of stretched lobes for a comfortable and secure fit.

Serpent weights showcase the intricate snakeskin detailing with contrasting oxidized and high-polished surfaces. Each piece measures just over 1” across and weighs 16 grams. Must be at least 6g to wear.

Continuous rows of faceted shapes mimic the flash of crystals. Each lightweight band has a hidden hinge that clicks closed for a secure fit. Each piece measures approximately 1” in diameter and weighs 10 grams. Must be at least 00g to wear. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

Oxidized metal meets sleek lines and finish. These earrings have a double-sided design consisting of a textured surface with a smooth polished center, with a CZ stone. Each piece has a 14g hinged clasp, measures just over 2 ½” in total length, and weighs 52 grams.

Adorned with a cast filigree design for a light and airy look, these elegant horseshoe-shaped weights hug the lower half of stretched lobes for a comfortable and secure fit.

A simple and timeless design, these polished brass spool weights feature conic shapes on both the front and back. Each piece weighs 8 grams and measures approximately 1/2” in overall length. Must be at least 5/8” to wear.

Ornate mandalas with a mix of themes, from floral designs to delicate filigree and tiny beaded details. These are double-sided, with matching detailing on both sides of each hoop. Each piece measures just over 2 ½” across and weighs 25 grams. Must be at least 14-gauge to wear.

A high-polished, pear-shaped genuine stone cabochon, bezel-set on one side of Diablo’s classic brass spade weights. Size 7/16" weights measure just over 1/2” in overall length and weigh 8 grams each. Size 9/16" weights measure 3/4” in overall length and weigh 13 grams each. Size 5/8" weights measure just under 1” in overall length and weigh 16 grams each. Size 3/4" weights measure 1” in overall length and weigh 23 grams each. Size 7/8" weights measure approximately 1 1/4" in overall length and weigh 35 grams each.

Delicately detailed embossing contrasts with the negative space and creates a radiating effect on these lightweight pieces. Each piece measures approximately 3” across and weighs 41 grams. Must be at least 14 gauge to wear.

Graduated rings of beaded detail create a beautifully psychedelic effect. Each piece measures approximately 2” across and weighs 46 grams. Must be at least 14 gauge to wear.

Sandpaper-finished diamond shapes with high-polished dangles that catch the light as they move. These measure approximately 3” in total length with a 14-gauge titanium hinged clasp.

A decorated flat hoop made from high-polished brass holds a faceted oval labradorite stone dangling from a single brass chain at its center. Each piece measures approximately 2” in overall length and weighs 14 grams. Must be at least ½” to wear.