Tawapa

Concentric rows of gold beads fan out from a high-polished spike in this hypnotizing design. Measures 7mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Cable chain links of solid gold form the bottom half of this bold design below a smooth wearable portion. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A new interpretation of the classic pair of cherries. Measures 6mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A mischievous, solid gold die cut in half (for those who are tired of playing games). Measures approximately 2.5mm tall and 3.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A flat solid gold outward-facing ring in the style of a curb chain. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A quietly grand solid-gold ring lined with nine 1mm outward-facing stones in open prong-settings, creating a dynamic look both head-on and from the side. Perfect for placements such as healed nostril and helix piercings. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Cast laurel leaves hang in a cascade from a high-polished hook. Each piece measures just over 2” long and weighs 10 grams. Wearable surface is 8g.

Marquise-shaped solid gold beads span the edge of a simple ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A vibrant marquise-cut gemstone is held within the miniature teeth of a scalloped bezel setting. Measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm by 4mm marquise-cut genuine stone is nestled between two brilliant clusters of three 1mm genuine stones. Measures 4mm by 8mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Graduating 1mm, 1.5mm, and 2mm gemstones sit along an elongated triangle with beaded detailing. Measures 3mm by 7.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm by 4mm marquise-cut stone is surrounded by rays of solid gold in this regal piece. Measures approximately 5.5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A solid gold ring in the shape of a rope chain, twisted in appearance to give the piece a sense of movement despite its rigidity. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A high-polished, scalloped shell with a serene air. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Solid gold leaves spring forth from a curved vine. Measures approximately 5mm by 11mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Flat hoops with granulated beaded borders were inspired by traditional Afghan designs. The 18g hinged clasp will fit standard ear piercings. Small measures approximately 1 ½” inches across. Medium measures approximately 2 ½” inches across.

A take on one of Tawapa’s signature designs, this continuous ring features a pattern of clean lines, flat, high-polished circles and tiny gold bead details. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Solid and symmetrical deer antlers. Posts are 16g, making these earrings suitable for standard ear piercings.

High-polished deer antlers, each a mirror-image of the other in the pair. Measures approximately 2 ½” in total length.

Five prong-set stones dot the tip of a solid gold chevron ring, subtly drawing the eye outward. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Cascading plates create armor for your ears. A hollow center ensures a lighter weight, while a hinged closure makes them easy to open but secure to wear. Each piece measures just under 1 ½” long and weighs 13 grams. Must be at least 6g to wear.

A solid gold tapered ring of millgrain beading holds three round-cut 1mm stones below a fixed jump ring. Measures approximately 8mm by 6mm. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

Deep-set solid gold beads in a prong setting flank three round-cut, prong-set stones at the center of a solid gold ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.