Tawapa

A square stone is reverse set (with the table on top) and held in two simple yet elegant v-prong settings. Measures 3mm by 4mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An exhilarating show of dimensionality and grit, this solid gold seam ring is wrapped in five coils of thin wire creating the infamous barbed wire design. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Five stones of graduating sizes are clutched within diminutive teeth and affixed to a solid gold ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A solid gold tapered ring of millgrain beading holds three round-cut 1mm stones below a fixed jump ring. Measures approximately 8mm by 6mm. Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A single round-cut genuine stone sits at the center of a milgrained solid gold eight-pointed star below a fixed jump ring. Measures approximately 10mm by 7mm Charms are made to be attached to other jewelry. These can be worn on rings or work well when put on press-fit or threaded posts as an accent to the decorative front end. To ensure a secure fit, pick the size below that corresponds to the jewelry the charm will be attached to. If worn on a post, make sure there is enough length to fit the extra piece of jewelry.

A gentle arc of solid gold cable links designed to accentuate the natural curves of the human body. Measures approximately 11mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Deep-set solid gold beads in a prong setting flank three round-cut, prong-set stones at the center of a solid gold ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Five prong-set stones dot the tip of a solid gold chevron ring, subtly drawing the eye outward. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A solid gold ring in the shape of a flattened forward-facing curb chain, a striking mixture of charming and edgy. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Petite earrings feature cast laurel leaves on a high-polished hook. Each piece measures just under 1” long and has a 16g hook that will fit standard ear piercings.

Vertical flat metal bars are twisted and textured within a circular frame. Each piece has an 18g hinged clasp that will fit standard ear piercings and measures just under 3” long.

This Art-Deco-inspired design has radiating lines that burst outward from the three circular cutouts at the center. Each piece has an 18g hinged clasp that will fit standard ear piercings and measures just under 3” long.

Multiple beaded hoops in graduating sizes come together in one striking earring design. Each piece has an 18g hinged clasp that will fit standard ear piercings and measures approximately 2” long.

Flat hoops with granulated beaded borders were inspired by traditional Afghan designs. The 18g hinged clasp will fit standard ear piercings. Small measures approximately 1 ½” inches across. Medium measures approximately 2 ½” inches across.

Six radiating petals of gold surround a 2mm prong-set stone. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An eight-point star with decorative beading holds a 1mm stone at its center. Measures 7mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A 2mm stone is bezel-set in gold with a burst of rays on one side. Measures 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A beaded crown of gold with a 1.5mm prong-set stone at the center is flanked by two 1mm matching stones on each side. Measures 5mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four gold rays surround a central 2mm prong-set stone. Measures 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four high-polished rings in graduating sizes hug the ear. Can be worn on pierced or unpierced ears. Each piece measures just over 1” in total length. Sold individually. For a pair, select a quantity of 2.

The smaller version of the Beaded Warrior Cuff, this cuff features four rings that hug the ear and are adorned with beaded detail. Can be worn on pierced or unpierced ears. Each piece measures just over 1” in total length. Sold individually. For a pair, select a quantity of 2.

Cascading plates create armor for your ears. A hollow center ensures a lighter weight, while a hinged closure makes them easy to open but secure to wear. Each piece measures just under 1 ½” long and weighs 13 grams. Must be at least 6g to wear.

A stylized cast cephalopod suspended from a high-polished hook. Each piece measures approximately 2 ½” long and weighs 16 grams. Must be at least 6g to wear.

A cast brass coiled dragon claw complete with talons, scales, and a smooth, high-polished finish on the wearable surface. Each piece measures approximately 1” in diameter and weighs 14 grams. Must be at least 6g to wear.