Threaded Ends

A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A captivating glass cabochon with a vibrant color-changing surface held in a smooth bezel setting. Due to the one-of-a-kind nature of the dichroic glass, please expect slight variations in coloration and design. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color. Sold as singles. For a pair, order a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A high-polished, implant-grade titanium claw setting cradles a vibrant, bullet-cut synthetic opal. Ends with a 4mm diameter measure about 7mm tall. Sold as singles. For a pair, order a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An implant-grade titanium ( ASTM F136 6Al-4V ELI ) ovoid threaded end designed for comfort and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An internally threaded ball made of implant-grade titanium (ASTM F136 6Al-4V ELI) anodized gold holds a bezel-set brilliant Swarovski crystal. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A flat foil-backed stone bezel-set in implant-grade titanium (ASTM F136 6Al-4V ELI) and anodized yellow for the appearance of gold at a fraction of the price. Stones are set, not glued, to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A high-polished dome encircled by a three-tiered beaded border. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A flat threaded disk with a hammered surface for added texture and interest. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An ultra-flat threaded disk made of solid gold. Simple and classic. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A flat disk made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and anodized yellow, giving it the look of gold at a fraction of the cost. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An internally threaded ball end made from solid 14k gold. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

The titanium version of the classic threaded ball end for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A stone bead is set in titanium in a minimal three-prong setting. These stones are set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with both 14g (1.6mm) and 12g (2mm) internally threaded barbell shafts and posts. Sold as singles. For a pair, order a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A bullet-cut stone in a simple bezel setting. Ends sized at 3mm in diameter are approximately 5mm tall, while the 4mm diameter ends measure about 6mm tall. Size 14g/12g will work with both 14g (1.6mm) and 12g (2mm) internally threaded barbell shafts and posts. Sold as singles. For a pair, order a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Each end has a stone bead set in implant-grade titanium in a minimal three-prong setting. These stones are set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A three-prong setting made of implant-grade titanium holds a synthetic opal bead. These opals are set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Brilliant Swarovski crystals are held in a three-pronged setting made of implant-grade titanium. Each faceted stone is set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with both 14g (1.6mm) and 12g (2mm) internally threaded barbell shafts and posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A conical spike made for internally threaded barbells and posts. Made of implant-grade titanium and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A smooth synthetic stone cabochon in a super-low-profile setting made of implant-grade titanium. These stones are bezel-set (not glued), to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An ultra-low profile setting made of implant-grade titanium with a flat foil-backed gem with brilliant shine and reflection. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An ultra-low profile screw-on end made of implant-grade titanium holds synthetic opal cabochons. These stones are bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A threaded ball made of implant-grade titanium holds a Swarovski crystal in a low-profile setting for maximum comfort and sparkle. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

These threaded ball ends are made of implant-grade titanium that is polished to a mirror finish and anodized yellow, for the look of gold at a fraction of the cost. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.