Titanium Jewelry - FM Test Delete

A high-polished, implant-grade titanium spike that is anodized yellow for the look of gold at a fraction of the cost. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A high polish internally threaded curved barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI). Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here !

A halo of 1.5mm gemstone petals surrounds a central 2mm bezel-set stone in this classic flower. Measures approximately 6mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A grouping of four marquise-cut gemstones set on an ever-so-slight curve. Mini holds 1.5mm by 3mm stones and measures approximately 8mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Three prong-set stones are arranged in a gentle curve. Mini holds 1.5mm stones and measures approximately 3mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished, implant-grade titanium disk for a simple and versatile design. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A larger prong-set stone with a smaller stone accent makes for an elegant, simple design. Mini holds a 1.5mm and 2mm stone. Measures approximately 4mm overall. Medium holds a 2mm and 2.5mm stone. Measures approximately 5mm overall. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Four prong-set gemstones form a stellar asymmetrical design. Mini holds 1.5mm stones and measures approximately 4mm by 6mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A charming butterfly with wings made of two 1.5mm by 3mm marquise-cut gemstones and two 1.5mm prong-set gemstones perched below. Measures 4.5mm by 5.5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Five marquise-cut gemstones arranged in a subtle curve. Mini holds 1.5mm by 3mm stones and measures approximately 4mm by 9mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A captivating glass cabochon with a vibrant color-changing surface held in a smooth bezel setting. Due to the one-of-a-kind nature of the dichroic glass, please expect slight variations in coloration and design. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A dynamic, implant-grade titanium claw setting clasps a genuine stone bead. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color. Sold as singles. For a pair, order a quantity of 2. Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post.

A bullet-cut genuine stone set in a sleek, implant-grade titanium claw setting. Ends with a 4mm diameter measure about 7mm tall. Due to the one-of-a-kind nature of these stones please expect slight variations in their color. Sold as singles. For a pair, order a quantity of 2. Press-fit jewelry is sold as two separate pieces: the shaft and attached end is one piece, and the decorative end is a second piece. If you need a complete piece of jewelry, make sure to purchase a press-fit end for your post.

A round, genuine stone bead set in an implant-grade titanium claw setting. Due to the one-of-a-kind nature of these stones, please expect slight variations in their color. Sold as singles. For a pair, order a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A high-polished, implant-grade titanium claw setting cradles a vibrant, bullet-cut synthetic opal. Ends with a 4mm diameter measure about 7mm tall. Sold as singles. For a pair, order a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A singular implant-grade titanium ring with an adjoined partial ring provides the illusion of wearing two rings at once in this dynamic design. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Two curb chains of varying lengths are suspended from jump rings on either end. Perfect for adding a bit of drama to a healed piercing. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the shortest chain, excluding the jump rings. Sold as a single chain. Barbell not included.

Add fluidity and texture to your setup with a single curb chain suspended between two jump rings. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A low profile trio of high-polished titanium forms the shape of a fan. Medium measures 4mm by 7mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An implant-grade titanium ( ASTM F136 6Al-4V ELI ) ovoid threaded end designed for comfort and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A lavish top-down design featuring two central 4mm bezel-set faceted stones surrounded by halos of titanium beads and 1mm stone accents, one fixed while its mirror dangles freely from a single jump ring. This curve features a decorative top fixed at one end and a removable 3/16” titanium threaded ball at the other for easy insertion and removal. Length is the measurement of the curved post between the threaded ends, not total length.

A timeless curb chain made from implant-grade titanium hangs suspended between two jump rings. Perfect for adding a fun, dimensional element to one or more piercings. Size refers to the thickest post these will fit. Each end of the chain is slipped over a closed jump ring. Length refers to the measurement of the chain, excluding the jump rings. Sold as a single chain. Barbell not included.

A straight, internally threaded barbell shaft made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Ends must be purchased separately. This style of jewelry is used in so many different piercings that we offer it in over 100 unique sizes! If you’re looking for straight threaded barbell shafts in sizes 16g to 8g, shop here . These straight barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your straight barbell shaft.

A smooth cabochon stone is bezel-set (not glued) in implant-grade titanium for an ultra low-profile look. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.