Anatometal

A bullet-cut stone in a simple bezel setting. Ends sized at 3mm in diameter are approximately 5mm tall, while the 4mm diameter ends measure about 6mm tall. Size 14g/12g will work with both 14g (1.6mm) and 12g (2mm) internally threaded barbell shafts and posts. Sold as singles. For a pair, order a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A polished heart-shaped synthetic stone cabochon set in solid 18k gold. Measures approximately 5mm across. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

The best you can buy. Steel captive bead rings from Anatometal are manufactured from F-138 compliant implant-grade stainless steel; titanium captive rings are manufactured from ASTM F-136 implant grade titanium. All rings are hand polished to a mirror finish. Captive bead rings often require ring opening pliers to install, so for larger sizes you may need help from your local piercer. For more information on how to install and remove captives, check Jewelry Types . For steel captive rings smaller than 6g, shop “ Captive Bead Rings from SM 316 .”

An internally threaded curved barbell shaft made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft.

A high polish internally threaded curved barbell shaft made of implant-grade titanium (ASTM F136 6Al-4V ELI). Ends must be purchased separately. These curved barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your curved barbell shaft. Due to manufacturer availability, we offer this product from multiple companies. If you don’t see what size you’re looking for, check here !

A 2mm solid gold dome accented by a tri-bead cluster. Less prone to tarnishing than 14k gold, these 18k gold ends will stay vibrant and are especially well-suited for sensitive piercings. Measures 2mm by 3mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Two tiny tri-bead clusters flank a 2mm solid gold dome. Measures 2mm by 5mm. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

An ultra-flat threaded disk made of solid gold. Simple and classic. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An ultra-flat threaded disk end for internally threaded barbells and posts. Made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A flat disk made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and anodized yellow, giving it the look of gold at a fraction of the cost. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An ultra-flat threaded disk end in for internally threaded barbells and posts. Made of implant-grade titanium ( ASTM F136 6Al-4V ELI ) and polished to a mirror finish. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A smooth, rounded top and a flat back allows for the look of a ball while sitting flush to the skin. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

Made from implant-grade, ASTM F-138 steel, these eyelets are high-polished and high-quality. Each tunnel is machined from a single piece of steel for a consistent size and finish. Single-flared eyelets include a clear silicone o-ring for a secure fit with an approximately 5/16” wearable surface. Double-flared eyelets ⅝” and smaller have a 5/16” wearable surface, and eyelets above ⅝” have a ⅜” wearable surface. Eyelets are sold individually. For a pair, choose a quantity of 2.

Simple and elegant fixed bead rings crafted from solid 18k gold. Less prone to tarnishing than 14k gold, these 18k gold rings will stay vibrant, and are especially well-suited for sensitive piercings. Each ring has a ⅛” bead that is attached to one side, so the bead won’t come loose and cannot be lost. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Simple and elegant fixed bead rings crafted from solid 18k gold. Less prone to tarnishing than 14k gold, these 18k gold rings will stay vibrant, and are especially well-suited for sensitive piercings. Each ring has a 3/32” bead that is attached to one side, so the bead won’t come loose and cannot be lost. This style of ring must be bent for insertion and removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Fixed bead rings have a small bead secured to one side of the ring. High-polished and made from ASTM F-138 implant-grade steel, these are perfect for ear, nostril, and other facial piercings. Since fixed bead rings must be bent for insertion or removal they are not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A classic high-polished flat disk is hammered to create a textured finish. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A flat threaded disk with a hammered surface for added texture and interest. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A heart-cut stone is prong-set in titanium and fixed to the end of a curved barbell with a matching 4mm removable internally threaded top. Length is the measurement between the stones, not total length. Perfect for navel piercings. Made of implant-grade titanium.

An ornate press-fit end featuring a center high-polished dome surrounded by three tiers of tiny beaded details. Available in 4mm, 5mm, or 6mm diameters. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

A high-polished dome encircled by a three-tiered beaded border. Size 14g/12g will work with either 14g (1.6mm) or 12g (2mm) internally threaded barbell shafts or posts. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Electric! A low-profile, high-polished lightning bolt made from solid 18k gold. Measures approximately 7mm long. Press-fit jewelry is sold as two separate pieces: the decorative end is one piece, and the shaft and attached end is a second piece. If you need a complete piece of threadless jewelry, make sure to purchase a press-fit post for your end.

With smooth edges and a flat profile, these oval-shaped threaded ends are made for comfort. Made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An implant-grade titanium ( ASTM F136 6Al-4V ELI ) ovoid threaded end designed for comfort and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.