14g (1.6mm)

A central 2.5mm bezel-set stone is flanked by two 1.5mm stones and further accented by clusters of tiny high-polished beads, all working together t...

A high-polished titanium seam ring with a row of three-bead clusters along the lower edge.  This style of ring must be bent for insertion and remov...

Five small tassels form the shape of a fan and are suspended below a brass shield by a chain of matching jump rings. These eye-catching pieces are ...

The mini version of their larger namesake, these earrings feature two pieces of contrasting brass held together by small jump rings that allow for ...

A 3mm trillion-cut genuine stone is accented by three 1.5mm stones. Prong settings add just a touch of gold while allowing each stone to shine. Mea...

Subtle prong settings hold a dazzling 3mm trillion-cut genuine stone with a row of smaller stone accents fanning out below. Accent stones measure 1...

Two 2mm princess-cut genuine stones are prong-set next to one another in solid gold. Measures 2.5mm by 5mm. Press-fit jewelry is sold as two separa...

Two 2mm by 4mm marquise-cut genuine stones are clustered together with a 2.5mm princess-cut stone. All gems are held by simple prong settings for a...

A stone bead is set in titanium in a minimal three-prong setting. These stones are set (not glued) to ensure the stone stays in place for the life ...

A bullet-cut stone in a simple bezel setting. Ends sized at 3mm in diameter are approximately 5mm tall, while the 4mm diameter ends measure about 6...

A classic teardrop shape with a 4mm by 6mm reverse-set Swarovski CZ and three chains for plenty of movement while you're on the dance floor! Measur...

Tiny three bead clusters sit above and below a 3mm by 4mm genuine stone held in a partial-bezel setting of solid gold. Measures 3mm by 8mm. Press-f...

A bold flame with raised, polished edges and a matte-finish, sandblasted center. 7mm by 8.5mm. Size 14g/12g will work with both 14g (1.6mm) and 12g...

A 3mm by 4mm genuine stone is held in a partial-bezel setting and accented by a single gold bead on one end. Measures 3mm by 6mm. Press-fit jewelry...

A solid-gold bar with a sparkling textured finish with an angular box chain dangling below. Measures approximately 2mm by 25mm. Press-fit jewelry i...

Curved edges and contrasting finishes make this diamond-shaped end look sleek and futuristic. Small measures 4.5mm at its widest point. Medium meas...

Ten tiny gold beads are paired in a rectangular shape and hold a short box chain just below. Measures approximately 2mm by 15mm. Press-fit jewelry ...

Three 2mm by 4mm marquise-cut genuine stones are held in V-prong settings and arranged in the shape of a fan. Measures 5.5mm by 9mm. Press-fit jewe...

A 1.75mm prong-set genuine stone sits at the center of this design, with a tri-bead cluster holding a 1mm flush-set genuine stone at the top and a ...

A freeform solid gold shape with a square bead dangling below from a short-but-sweet chain. A piece either Skwisgaar or Toki could rock. Measures 2...

This stunning press-fit end consists of a solid-gold bar at its center with two prong-set genuine stones stacked at the top and two dangling chains...

An out-of-this-world press-fit end. Three thin gold bars radiate out from a central high-polished dome, each holding a different design: tri-bead c...

A simple ball chain dangles next to a sparkling box chain with a 1.5mm genuine stone at the bottom. Measures 2mm by 9mm. Press-fit jewelry is sold ...

A marquise-cut genuine stone is wrapped in a high-polished gold band and accented by a 1mm genuine diamond at the center. Measures 4mm by 6mm acros...