Threaded Jewelry

A dazzling piece featuring a flurry of sparkling genuine stones sprinkled across the top of a 3mm princess-cut stone that peeks out from below, adding a simple subtlety to an abundantly luxurious design. The decorative end measures 3mm by 6mm across and 3mm tall. This threaded stud is sold as a complete piece: it includes the decorative front end and the straight threaded post backing. This style of threaded jewelry is not compatible with other threaded jewelry available in our store.

Combining the comfort of a classic threaded ball with the look of a spike. Made of implant-grade titanium and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A threaded ball made of implant-grade stainless steel holds a sparkling Swarovski crystal. Each faceted stone is bezel-set (not glued) to ensure the stone stays in place for the life of the jewelry. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A genuine Swarovski crystal is set (not glued) in the lower half of an internally threaded curved barbell. Perfect for navel piercings, these can also be striking in VCH and Christina piercings as well. The removable top ball is 3/16” and the bottom fixed gem ball is available in 7/32” or 5/16” in size. Made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. This item is sold as a complete piece of jewelry, with a fixed bottom gem ball and removable top ball.

A simple threaded ball end made for internally threaded barbells and posts. Made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A classic threaded ball end made from solid 18k gold. Sold individually. For a pair, select a quantity of 2. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A 4mm brilliantly faceted genuine stone is prong set in solid gold and surrounded by a border of tiny milgrain detail. Measures approximately 6mm across and 4mm tall. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A coiled serpent with the markings of a diamondback rattlesnake shown in tiny carved details. Measures 7mm by 9mm. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A 2.5mm by 4mm pear-cut genuine stone is accented by three 1.25mm genuine stones. Each gem is bezel set in solid gold, and tri-bead clusters peek out at the top and bottom of this design. Measures 5mm by 8mm. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A center 2.5mm by 4mm pear-cut genuine stone is surrounded by three 1.25mm bezel-set genuine stones and tiny gold beads. Measures 7mm across. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

Four 2.5mm by 4mm pear-cut genuine stones take center stage on this bold threaded end. Each stone is prong-set and surrounds a tiny gold bead center. Measures 10mm at its widest point. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A striking and bold design showcasing 2mm and 1mm genuine stones bezel set in solid gold and accented with ornate beaded details. Measures 6mm by 9mm. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An internally threaded labret post, machined from a solid piece of implant-grade titanium (ASTM F136 6Al-4V ELI), and polished to a mirror finish. Each labret post has an attached 3/16” (4.8mm) disk on one end. These posts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and posts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded end for your post.

A pear-cut genuine stone is reverse-set (with the table on the bottom) in a crown of gold prongs. Three small beads sit on the top and bottom of the design for an extra touch of whimsy. Measures 4mm by 8mm. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

A hexagonal genuine stone held is reverse-set (with the table on the bottom) in six simple yet elegant prong settings. Measures 6mm across. These ends screw on, and work only with internally threaded barbells of the same gauge. Threaded ends and posts are sold as individual pieces. If you’re looking for a complete piece of jewelry, make sure to purchase a corresponding threaded barbell shaft or post for your end.

An internally threaded circular barbell, or “horseshoe,” made from solid 14k gold. This circular barbell includes a circular “shaft” with two removable solid gold threaded balls for easy insertion and removal.

A stunning piece made from solid 14k yellow gold and prong-set stones. The attached end showcases a 5mm by 3mm faceted genuine garnet oval surrounded by fifteen 1.25mm clear CZs, measuring 9mm by 7mm overall. The removeable threaded top holds a faceted 4mm genuine garnet and allows for easy insertion and removal. Post is 14 gauge with a 3/8” wearable length.

Made from solid 14k yellow gold and shimmering with prong-set clear CZ stones, this curved barbell is truly a stand-out piece. Fixed to the bottom are eighteen 1.25mm faceted clear CZs that encircle a matching 5mm stone, creating the halo effect for which this piece was named. Measures 8.5mm in overall diameter. The removable threaded top holds a 4mm prong-set faceted clear CZ and allows for easy insertion and removal. Post is 14 gauge with a 3/8” wearable length.

A brilliant pink topaz top stone compliments an anastasia topaz bottom stone on this 14k rose gold navel curve. All stones are genuine and surrounded by a twisted-wire lariat. Top piece is threaded for easy insertion and removal, holding a 4mm stone; bottom piece is fixed and holds an 6mm stone. Measures 14g in thickness and ⅜” in length.

Gold beads encircle two bezel-set anastasia topaz gems on this gorgeous navel curve. Made with genuine stones in solid 14k yellow gold. Top piece is threaded for easy insertion and removal, holding a 2mm stone; bottom piece is fixed and holds an 4mm stone. Measures 14g in thickness and ⅜” in length.

Regal crown settings hold two genuine turquoise cabochons in solid 14k yellow gold. Top piece is threaded for easy insertion and removal, holding a 4mm stone; bottom piece is fixed and holds an 8mm stone. Measures 14g in thickness and ⅜” in length.

An ornate navel curve featuring an “Angela” cluster fixed to the bottom, with a 3mm genuine lapis cabochon. Made of solid 14k yellow gold with a removable 5/32” 14k yellow gold threaded ball on top. Measures 14g in thickness and ⅜” in length.

Perfect for nipple piercings, these implant-grade titanium barbells have forward-facing 4mm bezel-set synthetic stones to give your piercing that special “bling.” Each side-set gem barbell includes one fixed gem and one removable gem end made to fit that specific barbell, ensuring that both gems face the same direction. Internally threaded. Sold individually, so for a pair of barbells order two.