Rings & Clickers

A reversible clicker with flattering curves that form a subtle point at the center, with an inlay on the front and a crosshatch texture on the back. The single-snap hinged closure allows for easy opening and closing and makes this jewelry simple to change, all while allowing for a snug and comfortable fit.

A dazzling post/ring hybrid with three 1mm genuine stones prong-set in gold along a matching box chain. Size refers to the thickness of the post. This style of jewelry is a press-fit post with an attached chain. To wear, pull the removable end out, insert the post into your piercing, and then push the press-fit end back inside the hollow post.

Two twisted gold rings fixed to a single hinged clasp. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A horseshoe-shaped internally threaded barbell shaft that combines the look of a ring with the easy insertion and removal of a barbell. These circular barbells are made of implant-grade titanium ( ASTM F136 6Al-4V ELI ), polished to a mirror finish and anodized yellow. The look of gold at a fraction of the cost. Ends must be purchased separately. These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft.

Circular barbells combine the look of a ring with the easy insertion and removal of a barbell. This horseshoe-shaped internally threaded barbell shaft is made of implant-grade stainless steel (ASTM F-138 316LVM) and polished to a mirror finish. Ends must be purchased separately. These circular barbell shafts are internally threaded and work only with threaded, screw-on ends made to fit the same gauge. Threaded ends and shafts are sold separately. If you’re looking for a complete piece of jewelry, make sure to purchase corresponding threaded ends for your circular barbell shaft.

With a pattern of 1mm prong-set genuine stones along the outer edge, this clicker will add a special touch when worn in ear cartilage piercings, earlobes, or nostril piercings. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Eight 1mm genuine stones are prong-set in a random pattern across one side of a solid gold clicker. Elegant and unique. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

For a little extra flash, a solid gold chip chain is suspended below a high-polished seam ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

A 2mm by 4mm baguette-cut genuine stone is set on a classic solid 14k gold continuous ring. An extra special touch for an extra special ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

Additional layers are stacked under a single hinge ring, creating the illusion of wearing multiple rings at once, with a singular accent of a dangling chain. Made from ASTM F136 implant-grade titanium. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Simple and classic high-polished solid gold seam rings. This style of ring must be bent for insertion or removal, so it is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

This ring takes two distinct pieces and makes them one: a 2mm bezel-set stone or dome is accented by a single tri-bead cluster and attached to a solid 18k gold fixed bead ring. This style of ring must be bent for insertion and removal. It is not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry.

With a single hinged ring as the base, additional layers are stacked in front and behind to create the illusion of wearing multiple rings at once. Made from ASTM F136 implant-grade titanium, these are available with a plain high-polished finish or anodized in a variety of colors. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

Carved septum tusks made from stone for a primal look. All sizes measure approximately 2” in total length.

A row of triangular, three-bead clusters frame the base of this solid gold hinged ring. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

With a triple granulated edge, this beautiful hinged ring is incredible alone or stacked with other rings. The single-snap hinged closure allows for easy opening and closing, and makes this jewelry simple to change while allowing for a snug but comfortable fit.

A single line weaves around each crystal segment for a design that is both attractive and engaging. This ring has a hinged clasp for easy insertion and removal. Cast in stainless steel, these are sturdy and nonreactive when worn. Options include “nude” steel, with no plating; black PVD-coated stainless steel; and yellow- and rose-gold-plating over yellow-PVD-coated stainless steel.

A classic design that allows for easy insertion and removal, these nostril nail hoops have an attached prong-set cubic zirconia on one end to hold the ring in place. The attached clear CZ stones can be as small as 1.5mm or larger.

A timeless seam ring with a simple row of 2mm beads. The ring is F-138 compliant implant-grade stainless steel and is hand polished to a mirror finish. The beaded overlay is available in silver or solid 18k gold. Seam rings must be bent for insertion or removal so they are not recommended for piercings that need to be changed regularly, as frequent bending will distort the shape of the jewelry. For well-healed piercings only.

Like titanium, niobium is inert, hypoallergenic, and can be anodized different colors. These niobium captive rings from SM316 are anodized a vibrant yellow-copper color, making them a unique option for “gold” jewelry. Captive rings often require ring opening pliers to install, so for larger sizes you may need help from your local piercer. For more information on how to install and remove captives, check Jewelry Types .

A classic design, Nostril nail hoops have an attached 2mm disk on one end to hold the rings in place while allowing for easy insertion and removal. All rings are manufactured from F-138 compliant implant-grade stainless steel and are hand polished to a mirror finish.

A row of three-bead clusters adorn this hinged ring made from solid, high-polished 14k yellow, rose, or nickel-free palladium white gold. The hinged design allows for easy opening and closing, making this ring simple to change and allowing for a more snug (but still comfortable) fit.

A classic design, this hinged ring allows for easy opening and closing. Made from solid, high-polished 14k yellow, rose, or nickel-free palladium white gold.

Made from implant-grade titanium, these beads are designed to snap into captive bead rings. Flat on the back, these have a single bezel-set gem on the front. Except for a limited selection of cabochons, all stones are synthetic. 2.5mm beads fit 16g and small-diameter 14g captive rings. 3mm beads fit larger-diameter 16g and small-diameter 14g captive rings. 4mm beads fit larger-diameter 14g and 12g captive rings. If you order a captive gem bead and captive bead ring together, we’ll make sure you get a bead and ring with a good fit.